2006-2013 Mitsubishi L200 dvd gps sat nav system installation is a little different from other stereos’ installation,because this kind of stereo include two things:one touch screen and one operation system.It means that you can use the radio not only by using touch screen pen but also by operate push buttons.

Actually this kind of stereo is not only just for Mitsubishi L200,it can also be installed in cars of Mitsubishi Triton,Mitsubishi Pajero Sport,Mitsubishi Montero Sport,Mitsubishi Nativa,Mitsubishi Pajero Dakar from 2006-2013.Because these cars’ radio dashboard are same to stereo dashboard of Mitsubishi L200.

It sounds great,isn’t it?And, if you decide to remove original head unit of the car and mount a bluetooth dvd,here are specific steps on removing autoradio that may help you finish your installation work.

1..Original car stereo

original car stereo

original car stereo

2.Remove this screw and the other one on the left

remove this screw and the other one on the left

remove this screw and the other one on the left

3.With two screws removed,you can easily remove the trim panel

easily remove the trim panel

easily remove the trim panel

4.Remove four screws which has two on each side(on this side is the screw in the picture and lower one),and put them on a prominent place

remove four screws which has two on each side

remove four screws which has two on each side

5.Then the stereo is unclipped,but remember to turn off your car and make your hanging file to empty file in order to make sure security

turn off your car and make your hanging file to empty file

turn off your car and make your hanging file to empty file

6.Unplug cables that connected the stereo

unplug cables that connected the stereo

unplug cables that connected the stereo

7.Remove these two screws and the other two behind them and then you can remove trim panel of the stereo

remove these two screws and the other two behind them

remove these two screws and the other two behind them

8.Connect cables and antennas of new radio correctly to the car

9.Tidy all wires well,firm 4screws to make sure secured and install new unit into it

10.Firm four removed screws and install dashboard on the radio

This is aftermarket sat navi system dvd player of 2006-2013 Mitsubishi L200,which is a little special than other ones,and if your radio set is like this one,then you can mount it in your car under correct installation guide.

stereo autoradio after upgrade,aftermarket sat navi system dvd player of 2006-2013 Mitsubishi L200

aftermarket sat navi system dvd player of 2006-2013 Mitsubishi L200

After you have finished all this for Mitsubishi L200 dvd gps installation,you can turn on the new radio and check whether this new unit can work or not.If yes,it means that you have achieved it successfully.But if it doesn’t work,then you may need to find out the reason and check your operations including cable connection,whether screws are tight or you lose something which is important.If you are willing to search the Internet,I advise you to visit some useful websites,for example:

http://www.seicane.com/all-in-one-cd-dvd-radio-gps-stereo-for-2006-2013-mitsubishi-l200-triton-pajero-sport-montero-sport-nativa-pajero-dakar-with-lcd-touch-screen-dvd-bluetooth-tv-tuner-3g-wifi-mp3-steering-wheel-control-pop-dvr-aux-c094  .

The dvd player has a lot of features,especially the GPS navigation system.GPS has become a hot trend in drivers,for it bring them much convenience when they are busy in the car,and it also make you have a closer connection with outside world.Surely you will enjoy good time with a new head unit in your car.If you meet any problems,ask people who are professional in this market for help.

 

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation