This is the new car stereo DVD GPS navigation system of 2014 Jeep Grand Cherokee.You will know whether this stereo can be installed in
your car by comparing their trim panels between this unit and original one.
Do you have a car of Jeep Grand Cherokee for 2008-2011?If your answer is yes and you want to upgrade its sound system,then you can patiently read
this article that will show you 2014 Jeep Grand Cherokee DVD GPS
with BT Ipod music installation.
Many people update car audios is just like we are changing our cell phones very rapidly.If
you have no time to do it yourself,a professional person can do this only if you pay him
corresponding fees.And is it possible to do by yourself?
It’s a fact that a lot of drivers have demonstrate they can succeed installing
Jeep Grand Cherokee DVD GPS system.It doesn’t need technical skills but right removal
tools,and you should be gentle when you are prying parts of the unit and keep well them.
Some precautions before installation:
1.Have a check for your car series include the radio to see whether everything is ok and then
turn off them and park your car well
2.Please disconnect negative cable before you begin to work,this will ensure you more safer
3.You’d better make enough preparation for your installation work by searching enough
information about this unit,and next website may help you a lot:http://www.seicane.com/o
em-gps-navigation-stereo-remove-for-2008-2009-2010-2011-jeep-grand-cherokee-with-am
-fm-radio-rds-bluetooth-tv-tuner-cd-dvd-player-hd-1080p-c202
4.Preparing tools which will be used in the process
2014 Jeep Grand Cherokee stereo removal and dvd GPS installation:
1.Use a pry tool to prize lower control buttons to remove it
2.Make cables behind it unplugged,you can use a tool help you if it is very tight,remove
button controls and put it aside
3.Makie off 2 screws ,which has one on each side
4.Gently lever edges around trim panel to release and remove it
5.Remove 4 screws beside the stereo,there are two on each side
6.Remove factory stereo and disconnect cables back of it
These 6 steps are about how to remove original car stereo and next we will learn
Jeep Grand Cherokee new audio system installation.It can normally divided into
3 steps.
1.Making cables connection:this affair may be the most difficult thing for most people
for things containing wires is always more complex than other things.So you should be
very serious to do it.You can read the installation instructions within your new stereo
carefully and do the connection step by step.
2.After that,install new stereo in your car and turn on your radio to see whether your
installation is correct
3.If everything is ok,then make other removed parts back on car,including screws
and trim panel
Precautions after installation:
1.Please do not be too excited after successful installation,remember that keeping you
safe can only enjoy more entertainments,so do not stare at it when you are driving
2.Please do not use any chemicals to wash it,neither other kind of cleaning products
3.When you are driving on a rainy day,you should pay more attention to the touch screen
of head unit,for moisture may gather on it and cause damage to the machine
4.Please change the exhausted batteries in time in order to make your upgraded radio
can be used longer
Recent Comments