Jeep series car is always very domineering on its appearance,then its stereo also need to be match it.You can have a look at this picture,it’s a car stereo after installation,gps radio sat nav system with tv of 2008 2009 2010 Jeep Commander.It looks not bad when replacing a radio like this,so you are eager to know 2008 2009 2010 Jeep Commander radio gps navigation installation.
car head unit after upgrade,radio sound system with gps nav system of 2007 2008 2009 2010 Chrysler Sebring
Size and exterior of this player is at normal standard,its design makes it is suitable not only Jeep Commander of 2008 2009 2010,but also matches many other cars,and yours may be one of it.You can figure out answer by comparing the panel of your original CD player with this one’s,if they are in same size,it means that it can be installed in your car.
Actually removal stereo procedure is alike in a lot of parts,for example things that need to remove,you will remove panel and screws on normal circumstances.
Therefore though it looks not suitable for your car,reading this article and getting to know roughly installation instructions will surely benefit you at latter time.Because you can also help your friend to finish this work.
Before you begin installation,knowing more information about this new stereo is necessary for you,for it will show you detailed operations about how to use the new autoradio.And here is a video which is suitable for you to view:
After seeing a video for more messages,next we come to talk about how to remove original CD player and install dvd player for car.
2008 2009 2010 Jeep Commander autoradio removal:
1.The original CD player of 2008 2009 2010 Jeep Commander
original CD player of 2008 2009 2010 Jeep Commander
2.Prize the trim panel to release it with a pry tool
prize the trim panel to release it with a pry tool
3.Take out trim panel and disconnect antennas between panel and car
take out trim panel and disconnect antennas between panel and car
4.Unscrew 4 screws with a screw removal tool,2 screws on each side
unscrew 4 screws with a screw removal tool,2 screws on each side
5.Take out factory stereo gently and disconnect cables behind it
take out factory stereo gently and disconnect cables behind it
Operations for CD player removing is over here,and next we will learn how to install new head unit into the car.
2008 2009 2010 Jeep Commander car dvd installation:
6.Make connections on wires step by step as next pictures show
connect cables,antennas and connectors1
connect cables,antennas and connectors2
connect cables,antennas and connectors3
7.Then install the radio into right space,and you’d better have a tidy for the wires because the space is limited
install the radio into right space
8.After you have accomplished Jeep Commander radio mount,please don’t eager to firm screws and make removed panel back on their original places,you can turn on installed stereo first and see if all your antennas are connected correctly.If not,the screen of the unit can’t work and you need to remove head unit and connect wires again.
And if the stereo operates well,it shows that you have done it perfectly and then continue things behind it.Now you have owned a car with new radio,you may be very excited and can’t wait to enjoy it.
But I have doubt about whether you are familiar with its usage,and I advise you to search for some related information to help you operate it better and can avoid unnecessary damage to the machine.For example,this website may help you get it:http://www.seicane.com/hot-2008-2009-2010-jeep-commander-dvd-gps-car-stereo-3g-wifi-radio-rds-tv-bluetooth-mp3-ipod-iphone-aux-pop-rearview-camera-c202.
Enjoy yourself well when you are driving with upgraded car stereo!But please do not take it as your attention or even eyes.You still should pay attention to driving series like before.Installing a new unit is to help you enjoy more comfortable and convenient life,but not to instead of driving.
At last,wish you succeed finishing your removal and installation.It’s not a job just for professional workers,but also can be self-thing for drivers.But you should be patient and careful enough to do it and check the cables,which is a key point during whole procedure.
Recent Comments