Head unit after installation,gps dvd with sat nav system touch screen of 2011 2012 2013 Opel Astra
When you see this car dvd you may feel confused for it’s a little different with your owned one from appearance and even functions.Original screen is not only used for watching,while this one has also operate the radio function.A lot of people have the desire to install a dvd player for his Opel Astra to catch up with society tendency and enjoy more convenient and comfortable life in car,which is on the same way on aim of this article,because you will see 2011 2012 2013 Opel Astra dvd player with sat nav system installation here.
Before you begin radio installation,you need to mind a series of things to make your work more smooth.
Precautions before installation:
1.Please turn off all car series and disconnect negative battery cable to avoid unnecessary damage to people
2.In addition,please keep original CD player and removed screws well in order to ensure that you can find needed objects when you have installed unit in at later time
Then we come to take about how to remove factory radio and install a new Opel Astra dvd player.It’s normal for you to find there is a little difference between your car radio appearance with the following one,don’t worry and you can take it as reference because stereos for a series of cars are generally the same.
2011 2012 2013 Opel Astra CD radio removal:
1.Get all things in this space out
2.Use a pry tool,pry surface file panel and remove it.(you may remove it totally after next step)
3.Remove this screw and the other corresponding one
4.Release around big trim panel and remove it
5.Open up 2 small trim panels and remove 2 screws and other 2 under them
6.Remove lower notch and disconnect cables at the back of it
7.After that,you can gently take out factory stereo and disconnect cables connected it,some connectors may be very tight and you can use a pry tool to help you
8.Pry around edges of upper button controls on the panel and remove it
2011 2012 2013 Opel Astra CD radio installation:
9.Install it on your new trim panel,and the same to lower button control
10.Connecting cables and connectors is shown in the following pictures:
11.After finishing connecting all wires,install new unit into the right space and reinstall the big trim panel and other panels to the car
12.With all things to be done,then you can turn on your radio and check whether it’s installed well and if functions can operate
If you think that you are lack of information about new radio,you can choose to visit some related websites,for example: http://www.seicane.com/oem-aftermarket-car-radio-upgrade-sat-navi-system-for-opel-astra-with-fm-am-3g-wifi-3-zone-pop-built-in-gps-dvd-bluetooth-ipod-rearview-c072 .You may get a lot detailed messages include images,module and so on.
This installation may be a little more complex than other ones on connecting wires,but I have confidence that most of you have made it clear with these 12 detailed steps and clear images.
Please remember that do not make jokes for your life,and also your beloved car.Thus please be soft and gentle to your stereo especially when you are doing something with panels,screws and other system.In addition,connecting the antennas to correct places is an very significant job during the installation.Though it can be a self-done thing indeed but it’s on the condition that we are careful enough and take everything serious.
This new dvd has more useful functions,such as navigation system which can point you directions,bluetooth function,and you can also watch videos when you are free or sure that it’s very safe.With no doubt that we can enjoy a good journey in car.
Recent Comments