Suppose you are a owner of Subaru Outback,do you have the desire to upgrade your car stereo when seeing next image,radio after installation,dvd player with sat nav audio system of 2012 2013 Subaru Outback.
radio after installation,dvd player with sat nav audio system of 2012 2013 Subaru Outback
It’s not hard to look a suitable radio for 2012 2013 Subaru Outback,this unit is just one of it.You will see 2012 2013 Subaru Outback radio dvd with touch screen installation in this essay.Why more and more people are interested in updating vehicle stereos?I think it’s mainly for people’s needs to everything is getting higher especially when we have worked for a long time and want to have a rest,such as go on a trip or even have a big rest.
Undeniably daily life is becoming busier and better,a lot of people buy cars which makes his journey more convenient.And most of us pay much attention on radios for it can make us feel comfortable when driving with an advanced head unit.
A picture is always not enough for us to know something,isn’t it?So we need to seek for more details for this radio to help you own a better acknowledge of it,here is a video for you which will show you intuitive affairs of its functions and precautions of usage:
After viewing this video,I hold that most of you have a generak idea about new produced machine.No matter if you are going to install one,reading next part patiently will benefit you for you can tell your friends how to act it someday.
2012 2013 Subaru Outback head unit removal and installation:
1.Unscrew this handle out
Unscrew this handle out
2.Use a tool as picture show,pry trim panel to release it(but not to remove)
Use a tool as picture show,pry trim panel to release it
3.Remove its surrounding panel
Remove its surrounding panel
4.Pry edges around outside trim panel and remove it,disconnect cable connected it
pry edges around outside trim panel and remove it
5.Remove 2 screws with a screwdriver
Remove 2 screws with a screwdriver
6.After that,you can remove two side trim panels
remove two side trim panels
7.Remove 5 screws beside radio,which has 2 on one side,and 3 on the other side,then you can take out CD player and disconnect cables beside it
Remove 5 screws beside radio,which has 2 on one side,and 3 on the other side
take out CD player and disconnect cables beside it
8.Make surface panel of CD away from the unit,and before that you should remove screws on original unit
Make surface panel of CD away from the unit
9.Connecting cables and antennas as following pictures show
Connecting cables and antennas
Connecting cables and antennas2
Connecting cables and antennas3
10.After connection,install trim panel on it and leave one cable outside
install trim panel on it and leave one cable outside
11.Connect round red connector on upper right side of the panel
Connect round red connector on upper right side of the panel
12.Connect outside cable to back of new unit
Connect outside cable to back of new unit
13.Install new radio into the place for it
Install new radio into the place for it
14.Firm screws and make panels back to original places
Firm screws and make panels back to original places
These are 14 steps for whole Subaru Outback radio installation.Don’t be afraid of this number,you will find there is not any very difficult works that you are unable to do if you have read it patiently.Of course,if you want to make it more perfect then you need to be careful and patient enough and surely will behave well.
In order to make your driving better after new unit installation,you can also visit some websites,for example:http://www.seicane.com/head-unit-auto-radio-cd-player-oem-replacement-system-for-subaru-outback-with-gps-navigation-3g-wifi-support-bluetooth-music-tv-dvd-function-c061,which will provide you a lot of specific information about new radio.
Recent Comments