Monthly Archives: March 2015

People are always seeking for more entertainments in daily busy life,we need to rush about for life but we also should learn to enjoy it,this is the real life we need.Many people choose to buy a car because it will bring them much convenience.Do you have a Toyota Camry?Next I will show you simple steps about how to upgrade 2012 2013 Toyota Camry stereo autoradio.There is an image for the head unit after installation,nav system of 2012 2013 Toyota Camry.

the unit after installation,radio gps of 2012 2013 Toyota Camry

Before I begin to show you the installation steps,there are some tips for you:please make sure that you have finished all the parking series to ensure security.In addition, when the car navigation system is operated at very fast speed for a long time,or the temperature is over 65 degrees,it will enter heat protection mode,this is what you really need to be careful. If you are interested in it,you may have a patient look at the following instructions and then get a general idea about it.

1.Pry the below dashboard with a lever

pry the below dashboard with a lever

2.Take out two screws with a screwdriver

take out two screws with a screwdriver

3.Remove two screws which beside the white ones

remove two screws which beside the white ones

4.Then you can loose the upper dashboard gently

loose the upper dashboard gently

5.Softly get out the CD player and disconnect all the cables

softly get out the CD player

disconnect all the cables

6.The head unit after removal

the head unit after removal

7.After the removal procedure,connect the cables of new unit to the right places,or you can take instructions as reference

8.Install upper dashboard and fasten four screws and make the below dashboard to its original position

Have you finished all these work for Toyota Camry stereo upgrade as these 8 steps show?We can find that it’s not difficult to remove the original CD player and replace a new one.Of course,there will still appear some small problems for different situations.At that time,thinking about the reason calmly or asking somebody who are professional in this part for help,nothing will not be solved only if you really decide to achieve it especially when you have prepared a lot for it.

It can a little dangerous if you take it too easy,easy doesn’t mean you can do it without any rules.Please mind one tip that safety should be placed at the first position,stop your action whenever you feel any danger,because you are not a professional person in this field after all,you may do some uncorrect things or didn’t attention some important things,these are all possible,therefore make adequate preparations for your Toyota Camry removal please and you can ask someone beside to help you .

You can also visit some related websites for some useful information,for example:http://www.seicane.com/8-inch-2012-2013-toyota-camry-aurion-eu-au-version-autoradio-dvd-player-tv-tuner-bluetooth-radio-rds-3g-wifi-pop-aux-backup-camera-hd-1080p-mp3-steering-wheel-control-c131,which will help you have a better understanding of new functions of Toyota Camry stereo radio.

Are you a owner of Toyota Avalon?And are you familiar with below image?

new unit after installation,gps nav system of 2011 2012 Toyota Avalon

Is it easy to remove an original radio of Toyota Avalon and replace a more advanced one?The whole process may only take about half an hour, but this’s to professional car stereo removal staffs. If you are willing to remove the unit by yourself, you’d better ask a professional people for help to make sure what you did is correct.Actually the question of how to remove 2011 2012 Toyota Avalon aftermarket stereo autoradio should pay more attention to the old radio removal. You should refer to the installation guide from the dealer and then connect the wires of the new Toyota Avalon radio stereo correctly. Or, the new unit cannot work well in your car.

The following are the installation steps for the head unit of  2011 2012 Toyota Avalon. Before you begin the removal please apply the parking brake and remove the negative cable on the vehicle battery to ensure security. You can prepare tools for the mount, too. You may need a screwdriver, a lever and so on.

1.The original CD player

the original CD player

2.Get out the gear shift panel

get out the gear shift panel

3.Remove screws with a screwdriver as the picture show

remove screws with a screwdriver as the picture show

4.Remove the air-conditioner panel with a soft lever

remove the the air-conditioner panel with a soft lever

5.Take out two screws with a screwdriver as the image show

take out two screws with a screwdriver as the image show

6.Remove the original head unit

remove the original head unit

7.The original car radio after removal

the original car radio after removal

After you have finished removing staffs,you can check it whether is the same with this above one.

This is the removal process of 2011 2012 Toyota Avalon autoradio, have you made it clear?

When you start up to remove the original one, please according to the installation instruction from the dealer if you have it. Connect the new unit antennas to right positions. After that, slide the unit into the dash then connect the negative cable  to the original wiring harness as the instruction shows. Notice the wires should be connected correctly and the same to battery installment. Turn on the new unit and operate it as the user instruction for users requires. Check out  all the functions in the unit and see if  everything works well. If it doesn’t,  check the wires connections again or contact the technicians from the dealer for help.

This article is about the removal of 2011 2012 Toyota Avalon aftermarket stereo autoradio,it will only show you how to remove your CD player.If you want to know more about installation for it, you can visit some related websites for example:http://www.seicane.com/8-inch-autoradio-dvd-car-audio-system-for-2011-2012-toyota-avalon-with-3d-gps-bluetooth-radio-rds-3g-wifi-tv-tuner-mp3-mp5-ipod-aux-hd-1080p-video-backup-camera-c270,which will teach you installing the dvd player.