2015 Aprilcar dvd blog | car dvd blog

30Apr 2015

Installation steps for 2010 2011 Mitsubishi Lancer double din radio dvd support HD 1080P video

Have you covered some materials about upgrade for 2010 2011 Mitsubishi Lancer autoradio?If you are interested in installing a new head unit into your car,then you answer is probably yes.And today I’d like to show you specific installation steps for 2010 2011 Mitsubishi Lancer double din radio dvd support HD 1080P video.

Let’s have a look at a picture first,which is new unit after installation,GPS dvd player with touch screen rearview camera of 2010 2011 Mitsubishi Lancer.Showing this image is to provide a comparison for you to judge that if this unit can be installed in your car though you are not a owner of 2010 2011 Mitsubishi Lancer.

new unit after installation,GPS dvd player with touch screen rearview camera of 2010 2011 Mitsubishi Lancer

It’s not right to hold that a stereo is only for one car,while it may fit several cars actually,this is very possible.And the principles of it are almost same and has little difference.Thus on matter whether this nav radio installation guide is just for you,you can still have a patient reading and learn something which will benefits you.

We can see that roads are increasing very rapidly and become more complex,so GPS navigation system is very necessary to most drivers,it’s difficult for us to remember all routes in a place especially when we are in a strange place.Therefore many people begin to realize the importance of it.But they are too busy or don’t know how to achieve it,so many willing drivers haven’t achieved this goal.

And today I will give you some advices on how to remove and install the head unit of 2010 2011 Mitsubishi Lancer.Don’t be afraid of following number for step,in fact they are not hard to behave.

2010 2011 Mitsubishi Lancer radio head unit removal and installation:

1.Open up glove box

Open up glove box

2.Take screw out to side panel

Take screw out to side panel

3.Take side panel out by pulling toward seat

Take side panel out by pulling toward seat

4.Take screw out to trim panel

Take screw out to trim panel

5.Pull trim piece toward seat softly

Pull trim piece toward seat softly

6.Once trim piece is released,remove trim panel with panel removal tool or your hands

remove trim panel with panel removal tool or your hands

7.Several clips across trim panel which holds trim piece in place

Several clips across trim panel which holds trim piece in place

8.Please note that do not take these three screws out

do not take these three screws out

9.Gently prize around edges of stereo face with panel removal tool

Gently prize around edges of stereo face with panel removal tool

10.After removing stereo face,tab along edges of stereo which hold stereo

tab along edges of stereo which hold stereo

11.Disconnect the cable,and do not turn on vehicle at that time

Disconnect the cable

12.Take four screws holding stereo in place out

Take four screws holding stereo in place out

13.Take stereo out for access to harnesses behind it

Take stereo out for access to harnesses behind it

14.Take smaller connector out to give access to Grom Y-harness

Take smaller connector out to give access to Grom Y-harness

15.Make Grom harness into open port connected

Make Grom harness into open port connected

16.Plug harness which is removed to Grom Y-harness

Plug harness which is removed to Grom Y-harness

17.Connect 20-pin harness to Grom unit

Connect 20-pin harness to Grom unit

18.Separate and check wire for +12v constant

Separate and check wire for +12v constant

19.With+12v constant confirmed,make connection with provided P-Tap,please ensure P-Tap has punctured wire and is tightly secured

make connection with provided P-Tap

20.Fasten top cap and then connect Yellow power wire

Fasten top cap and then connect Yellow power wire

21.Plug stripped wire as far as possible

Plug stripped wire as far as possible

22.Secure cap tightly and tug on wire to ensure it is secured

Secure cap tightly and tug on wire to ensure it is secured

23.After making all connections,turn on stereo and test new unit and hope that you can enjoy your new audio system

Please check radio appearance and all functions to make sure they can work well before you start to upgrade car stereo and replace a new unit.After that you only can start up to make your Mitsubishi Lancer radio more wonderful by yourself.

If you need to know more details about new features of new installed dvd display,you can visit the following website which has a lot of information there: http://www.seicane.com/double-din-2010-2011-mitsubishi-lancer-aftermarket-gps-radio-system-tv-tuner-cd-dvd-player-3g-wifi-pop-dvr-hd-1080p-video-backup-camera-ipod-iphone-c037.

28Apr 2015

Installation guide for 2009 KIA Sportage aftermarket sat nav system

jeen ⋅ Leave a Comment

Head unit after replacement,aftermarket gps radio with sat nav system touch screen of 2009 KIA Sportage.Have a careful look at trim pane of it and then your factory radio’s,for most of you may haven’t changed the stereo for your car.

Head unit after replacement,aftermarket gps radio with sat nav system touch screen of 2009 KIA Sportage

Knowing the installation guide for 2009 KIA Sportage aftermarket sat nav system clearly is very necessary if you are willing to install one by yourself,in fact there are a lot of people make such a choice.

We can find that people nowadays are more likely to seek for entertainments from usual life.Though most of the time we are rushing for life but we also should learn to enjoy it.More and more people choose to buy a new car because it will bring them much entertainments and convenience.If you have a KIA Sportage in 2009,this article is just for you.

To be honest,you can of course ask a professional worker to do it,however it’s not difficult to achieve though you are not professional only if you can make adequate preparations for it and be careful enough.But simple doesn’t mean we can do as what we want without obeying any rules,here are some attentions for you.

Precautions about installation and this new unit:

Make sure that you have finished all parking series to ensure security.When the car is operated at very fast speed for a long time or when you feel the temperature is very high you need to pay more attention to your new radio,new unit may enter heat protection mode at this time.If you have made up your mind to install a new unit,you can have a patient look at the following instructions and then operate the machine step by step.

2009 KIA Sportage factory audio removal:

1.Use a hard lever pry dashboard’s downer part,and you should try several places of it to fasten it totally

Use a hard lever pry dashboard’s downer part

2.Then you can take out dashboard easily

take out dashboard

3.We can find that there are cables connected the dashboard,so we need to unplug the cables.Some of them may be very tight,you can unplug it with a lever

disconnect the cables

unplug tight cable with a lever

4.Take four screws out with a screwdriver

Take this screw and the other corresponding one out with a screwdriver

Take this lower screw and the other corresponding one out with a screwdriver

5.After that you can get original radio out

get original radio out

6.Unplug cables behind the radio

Unplug cables behind the radio

Removal affairs has been finished,next we will go on learning how to install KIA Sportage aftermarket sat nav system.In fact it’s easier than front process only if you can do a good cables connection.

2009 KIA Sportage aftermarket stereo installation:

7.Plug those cables correctly to sockets of new radio and then set it into place just for it

8.Firm four screws to original positions and cover dashboard to it

I have confidence in you that nothing will impede you from achieving this goal after scanning these specific introduction patiently.I guess there are still some people who are not very familiar with new installed unit,then I suggest you to visit next website to gain detailed knowledge about it:http://www.seicane.com/2009-kia-sportage-multimedia-dvd-receiver-with-7-motorized-touchscreen-3g-wifi-ipod-input-support-gps-bt-radio-tuner-3-zone-pop-c023-1.

If you can provide your car gps dvd with good mount and maintain,it will surely make your usual life more richful.I hold that it can ensure your radio’s longer usage if you can install the unit according to correct steps.And when you meet some problems that really troubles you,then you’d better ask someone who knows better to have a check,you are not professional after all.

27Apr 2015

How to install 2012 Hyundai I40 gps radio with bluetooth music

jeen ⋅ Leave a Comment

New unit after installation,gps radio dvd player autoradio of 2012 Hyundai I40.

New unit after installation,gps radio dvd player autoradio of 2012 Hyundai I40

Confirming mode,appearance and years is very easy which can get from the Internet,but if it’s about how to install 2012 Hyundai I40 gps radio with bluetooth music?

Facts shows that there are many people,who are owners of Hyundai I40,can install dvd player into the car themselves.You must have doubts about it,but it’s true.I probably know why they can do this because these men have made it clear about Hyundai I40 gps nav system installation instructions.

Now let’s look at front picture again,a lot of people may don’t know what a new stereo looks like,they have the desire to replace one but have no idea about what to do.It’s ok,your problems will be solved here.

Firstly,you need to find a stereo from car market which looks like above one in the picture.After that,I think this unit is strange to you,there are a lot of things that you are not clear,so you’d better do some search works about this upgraded unit,for example,you can visit next website to help getting more information:http://www.seicane.com/double-din-2012-hyundai-i40-gps-radio-auto-a-v-system-3g-wifi-cd-dvd-player-bluetooth-music-tv-tuner-dvr-hd-1080p-aux-steering-wheel-control-usb-sd-ipod-mp3-mp5-c172.

With full understanding about it,next we will begin to know what should we do step by step about Hyundai I40 radio installation.

2012 Hyundai I40 audio removal and installation:

1.Use a lever to remove trim panels from each side of center console

Use a lever to remove trim panels from each side of center console

2.Take out 4 screws from trim panel of radio

Take out 4 screws from trim panel of radio

3.Take ac vent controls out

Take ac vent controls out

4.Take 4 screws out which securing radio chassis to sub dash

Take 4 screws out which securing radio chassis to sub dash

5.Pull the CD player off

Pull the CD player off

6.Unplug radio chassis,and remove it

Unplug radio chassis,and remove it

Removal affairs has been accomplished,if you have also finished cd radio removal,you can have a comparison between yours and the one in the picture.If they look same,then you can start to mount your new car radio.

7.Connect the cables between new radio and car correctly,you can do it after you have a patient reading for installation guide.

8.Fix screws to their original places and reinstall trim panels to the dashboard

9.After all these,you can turn on your new head unit and have a check to see whether you have done all steps right

It won’t be a dangerous work as long as you can act according to right instructions of installation process. New unit of the car has new functions including navigation system,which will bring you much convenience.But please remember do not let the movies disturb your attentions when you are driving,really it can bring us convenience but not let the nav system instead of your head.

Precautions about installation and usage of the radio:

1.When you haven’t received any electronic equipment or lack of experience, don’t install or repair the stereo because it is very dangerous

2.If you use sharp objects or even fingers to operate the unit,it will damage the screen,please use a touch screen pen to do it

3.In case of the power is on,please don’t do self- maintenance,service, or install the radio

24Apr 2015

Installation guide for 2006-2011 Toyota Camry dvd player gps navigation system

jeen ⋅ Leave a Comment

New unit after installation,dvd player navigation system of 2006-2011 Toyota Camry

There is a phenomenon that more and more vehicle owners would like to install a dvd player by themselves.Does it mean they are all professional of it?I don’t think so,they should have searched right installation guide for Toyota Camry radio and do according it.Today I will show you practical installation guide for 2006-2011 Toyota Camry dvd player gps navigation system and you will also have the ability to achieve this object.

This fact also shows that demand for entertaining life is becoming very large and necessary.But how can we ensure that this one that above picture show is just the one we need?Don’t worry,if you find the trim panels of original one and new one are almost same,then it is.So you will seek a stereo which can match your car if you are going to upgrade your car audio system.

Precautions before installation:

1.Please have a check on the appearance and all functions of the car to makre sure that original system is all right before installing the unit

2.Please do not shorten or extened the GPS antenna,for it will arise antenna problem

3.Remember that do not let the GPS antenna winding the steering wheel and shift lever,it can be dangerous

2006-2011 Toyota Camry stereo autoradio removal and installation：

1.Softly pry the below dashboard with a pry tool

Softly pry the below dashboard with a pry tool

2.Use a screwdriver to take two screws out

Use a screwdriver to take two screws out

3.Make two screws out which are beside the white ones

Make two screws out which are beside the white ones

4.After that you can gently pry the upper dashboard with a pry tool

gently pry the upper dashboard with a pry tool

5.Softly take the CD player out and unplug all cables which connected it with car

Softly take the CD player out

unplug all cables which connected it with car

6.Factory stereo after removal

Factory stereo after removal

7.After the removal procedure,connect the cables of new unit to the right places,or you can take instructions as reference

8.Install upper dashboard and fasten four screws and make the below dashboard to its original position

Whole procedure for Toyota Camry dvd player head unit mount is over here,some of you may still have some doubts on the new unit,ok,you can visit websites to gather more information,for example: http://www.seicane.com/cheap-8-inch-2006-2011-toyota-camry-aurion-aftermarket-navigation-stereo-radio-tuner-bluetooth-music-3g-wifi-aux-pop-usb-sd-1080p-video-backup-camera-ipod-iphone-mp3-usb-sd-c064.

With front introduction regards to how to remove 2006-2011 Toyota Camry original stereo,and making your problems dealed with in time, it won’t be a difficult thing for you to finish it successfully.

Precautions during new unit operation:

1.Please do not use strong chemicals, cleaners, strong detergent to wipe the machine

3.Please use the touch screen pen to operate the unit, no using any other sharp objects, if not it will damage the screen

3.Please keep well the original display when the staff is dismounting the original radio in order to use the original screw again

23Apr 2015

How to install 2008-2013 Audi Q5 aftermarket radio with navigation system

jeen ⋅ Leave a Comment

Suppose you are a owner of Audi Q5,and wants to install a aftermarket dvd for your car,I guess you will first think of asking a technical staff to do it for you.However it’s a fact that you can also get it over if you know the installation guide,but how to install 2008-2013 Audi Q5 aftermarket radio with navigation system?

Before we think about this question,I think at first we should find a stereo which can be mounted in the car.Here is a head unit after installation,aftermarket radio gps navigation system of 2008-2013 Audi Q5.

head unit after installation,aftermarket radio gps navigation system of 2008-2013 Audi Q5

From this picture,you will have something in mind that whether this unit is suitable for your car from watching carefully the trim panel.If not,maybe you can look for another one from the Internet,and http://www.seicane.com can be a not bad choice,there are a lot of stereos there.

You will find that Audi Q5 aftermarket radio is a little different from other ones on appearance.But it won’t matter your head unit removal and installation.Actually there are a lot of steps are similar among car stereo installation,it means that you will learn some useful things no matter whether this unit is suitable for your car.

2008-2013 Audi Q5 audio system removal:

1.Original dashboard of Audi Q5

Original dashboard of Audi Q5

2.Fasten and take out the original screen frame

Fasten and take out the original screen frame

3.Pull the double flashing light button out

Pull the double flashing light button out

4.Remove four screws which firmed the screen

Remove four screws which firmed the screen

5.Disconnect the cable connected the screen

Disconnect the cable connected the screen

6.Loosen and remove the air-conditioner vent grille

Loosen and remove the air-conditioner vent grille

7.Fasten and take out the air-conditioner controller

Fasten and take out the air-conditioner controller

8.Remove four screws which fixed the original CD player and take out the player

Remove four screws which fixed the original CD player and take out the player

2008-2013 Audi Q5 audio system installation:

9.Make cables connection as the picture show

Make cables connection

10.Make connection on GPS box

Make connection on GPS box

11.Make the GPS box fixed on the glove box by using the support

Make the GPS box fixed on the glove box by using the support

12.Plug the cable to the screen

Plug the cable to the screen

13.Connect the original power line to the tieline

Connect the original power line to the tieline

14.Make the tieline connected to the original place of the car

Make the tieline connected to the original place of the car

15.Fix the screws which was taken out from the original CD player

Fix the screws which was taken out from the original CD player

16.Start the new unit and check all functions,then install other parts to their original place

Start the new unit and check all functions,then install other parts to their original place

A good installed dvd player will bring you too much entertainment and convenience.So if you have any problems about this procedure,you can get help from Internet,for example,you can visit next website and get answers from workers there:http://www.seicane.com/oem-dvd-gps-stereo-for-2008-2009-2010-2011-2012-2013-audi-q5-with-am-fm-radio-tv-tuner-bluetooth-music-pop-dvr-steering-wheel-control-auto-av-in-out-ipod-iphone-usb-sd-aux-c149.

To avoid damage and accident,please do not dismantle the host privately.Before installation,you can start car engine to check original radio function display and button controls to see whether the machine is normal; whether surface of car inside and outside have squandering phenomenon.After that he installer will reflect the case to customers if the unit has any problem.

When you are installing,the wire arrangement must be reasonable.Normally,the space for installation is limited.It is suggested to reduce unnecessary wiring to make the Audi Q5car DVD easier to install and access.The cables and wires which will be connected to the car head unit must be routed properly to avoid touching any moving parts,include steering wheel column acceleration pedal and brake pedal.All wires must be bonded properly to against any loosen during driving.

21Apr 2015

How to mount 2005 2006 Mercedes Benz CLK W209 gps radio with touch screen

jeen ⋅ Leave a Comment

At the beginning of this article,you can have a look at following image first:new unit after upgrade,car stereo autoradio with gps sat nav touch screen of 2005 2006 Mercedes Benz CLK W209.

new unit after upgrade,car stereo autoradio with gps sat nav touch screen of 2005 2006 Mercedes Benz CLK W209

If you watch very close,you can find that it’s a normal machine of all stereos and it can be installed not only Mercedes Benz CLK W209 of 2005 2006,but also can be mounted in other cars.Thus don’t be too worry if you are not a owner of this kind of car,it can match with yours only if its trim panel is the same with your factory one’s.So after solving this problem,next we will think about how to mount 2005 2006 Mercedes Benz CLK W209 gps radio with touch screen.

I think it couldn’t be better if we can do this installation ourselves,not only make us have a better understanding of our car,but also exercise our ability of hands.Therefore it’s right for you to read this article and learn how to accomplish the removal work patiently.And here is a video for you to learn how to use the unit:

Before you begin your job,I have some notes for you.

Precautions before installation:

1.Please turn off all car series include parking affairs before your installation

2.Please remember to disconnect negative power cables,or it can be dangerous during installation

3.You’d better ask your friend or someone else who can give you a hand in case you are in trouble

After attentions for mentioned things,we can start to know the specific steps of car stereo removal and installation.

2005 2006 Mercedes Benz CLK W209 car stereo upgrade:

1.Original stereo and 6-disc CD player

Original stereo and 6-disc CD player

2.At first separate the gear shift panel

At first separate the gear shift panel

3.Use a screw driverremove the screw marked with a red circle to release the car charger and ashtray

Use a screw driverremove the screw marked with a red circle to release the car charger and ashtray

4.Make out the car charger and ashtray assembly

Make out the car charger and ashtray assembly

6.Pry the air conditioner panel with a plastic lever

Pry the air conditioner panel with a plastic lever

7.Take out the original air conditioner panel

Take out the original air conditioner panel

8.Take the heated seat out and control panel assembly

Take the heated seat out and control panel assembly

9.Get two screws down

Get two screws down

10.Take out the original CD player and be careful not to stretch the wiring harness behind the assembly

Take out the original CD player and be careful not to stretch the wiring harness behind the assembly

11.This is the wiring diagram

wiring diagram of the unit

12.Make the plug of the car in the socket of the unit

Make the plug of the car in the socket of the unit

13. Antenna of the stereo

Antenna of the stereo

14.Install the unit after the wiring harness has been connected

Install the unit after the wiring harness has been connected

If you need to know more details about this dvd player,you can visit the next website:http://www.seicane.com/top-car-gps-radio-replacement-for-2005-2006-mercedes-benz-clk-w209-with-dvd-bluetooth-wifi-3g-tv-dvr-1080p-rearview-camera-mp3-c090-2,where can give you satisfied answers.

After successful installation of new unit,please be attention that do not make jokes for your life,the same to your beloved car.Therefore please be soft and gentle to your autoradio especially when you are removing factory CD player of head unit.

In addition,connecting the antennas to right positions is a key point during the installation for Mercedes W209 gps.It can be a self-done thing but on the case that you are careful enough and take it serious.

This new radio has more useful functions,such as navigation system which can draw a map on touch screen and point you where to go,bluetooth function,and you can also watch videos when you are free or you are sure that it’s very safe at that time if you keep your eyes on the screen.With no doubt that we can enjoy a good journey in car with such a autoradio with sound system.

15Apr 2015

2012 2013 Subaru Outback radio dvd with touch screen installation

jeen ⋅ Leave a Comment

Suppose you are a owner of Subaru Outback,do you have the desire to upgrade your car stereo when seeing next image,radio after installation,dvd player with sat nav audio system of 2012 2013 Subaru Outback.

radio after installation,dvd player with sat nav audio system of 2012 2013 Subaru Outback

It’s not hard to look a suitable radio for 2012 2013 Subaru Outback,this unit is just one of it.You will see 2012 2013 Subaru Outback radio dvd with touch screen installation in this essay.Why more and more people are interested in updating vehicle stereos?I think it’s mainly for people’s needs to everything is getting higher especially when we have worked for a long time and want to have a rest,such as go on a trip or even have a big rest.

Undeniably daily life is becoming busier and better,a lot of people buy cars which makes his journey more convenient.And most of us pay much attention on radios for it can make us feel comfortable when driving with an advanced head unit.

A picture is always not enough for us to know something,isn’t it?So we need to seek for more details for this radio to help you own a better acknowledge of it,here is a video for you which will show you intuitive affairs of its functions and precautions of usage:

After viewing this video,I hold that most of you have a generak idea about new produced machine.No matter if you are going to install one,reading next part patiently will benefit you for you can tell your friends how to act it someday.

2012 2013 Subaru Outback head unit removal and installation:

1.Unscrew this handle out

Unscrew this handle out

2.Use a tool as picture show,pry trim panel to release it(but not to remove)

Use a tool as picture show,pry trim panel to release it

3.Remove its surrounding panel

Remove its surrounding panel

4.Pry edges around outside trim panel and remove it,disconnect cable connected it

pry edges around outside trim panel and remove it

5.Remove 2 screws with a screwdriver

Remove 2 screws with a screwdriver

6.After that,you can remove two side trim panels

remove two side trim panels

7.Remove 5 screws beside radio,which has 2 on one side,and 3 on the other side,then you can take out CD player and disconnect cables beside it

Remove 5 screws beside radio,which has 2 on one side,and 3 on the other side

take out CD player and disconnect cables beside it

8.Make surface panel of CD away from the unit,and before that you should remove screws on original unit

Make surface panel of CD away from the unit

9.Connecting cables and antennas as following pictures show

Connecting cables and antennas

Connecting cables and antennas2

Connecting cables and antennas3

10.After connection,install trim panel on it and leave one cable outside

install trim panel on it and leave one cable outside

11.Connect round red connector on upper right side of the panel

Connect round red connector on upper right side of the panel

12.Connect outside cable to back of new unit

Connect outside cable to back of new unit

13.Install new radio into the place for it

Install new radio into the place for it

14.Firm screws and make panels back to original places

Firm screws and make panels back to original places

These are 14 steps for whole Subaru Outback radio installation.Don’t be afraid of this number,you will find there is not any very difficult works that you are unable to do if you have read it patiently.Of course,if you want to make it more perfect then you need to be careful and patient enough and surely will behave well.

In order to make your driving better after new unit installation,you can also visit some websites,for example:http://www.seicane.com/head-unit-auto-radio-cd-player-oem-replacement-system-for-subaru-outback-with-gps-navigation-3g-wifi-support-bluetooth-music-tv-dvd-function-c061,which will provide you a lot of specific information about new radio.

14Apr 2015

2008 2009 2010 Jeep Commander radio gps navigation installation

jeen ⋅ Leave a Comment

Jeep series car is always very domineering on its appearance,then its stereo also need to be match it.You can have a look at this picture,it’s a car stereo after installation,gps radio sat nav system with tv of 2008 2009 2010 Jeep Commander.It looks not bad when replacing a radio like this,so you are eager to know 2008 2009 2010 Jeep Commander radio gps navigation installation.

car head unit after upgrade,radio sound system with gps nav system of 2007 2008 2009 2010 Chrysler Sebring

Size and exterior of this player is at normal standard,its design makes it is suitable not only Jeep Commander of 2008 2009 2010,but also matches many other cars,and yours may be one of it.You can figure out answer by comparing the panel of your original CD player with this one’s,if they are in same size,it means that it can be installed in your car.

Actually removal stereo procedure is alike in a lot of parts,for example things that need to remove,you will remove panel and screws on normal circumstances.

Therefore though it looks not suitable for your car,reading this article and getting to know roughly installation instructions will surely benefit you at latter time.Because you can also help your friend to finish this work.

Before you begin installation,knowing more information about this new stereo is necessary for you,for it will show you detailed operations about how to use the new autoradio.And here is a video which is suitable for you to view:

After seeing a video for more messages,next we come to talk about how to remove original CD player and install dvd player for car.

2008 2009 2010 Jeep Commander autoradio removal:

1.The original CD player of 2008 2009 2010 Jeep Commander

original CD player of 2008 2009 2010 Jeep Commander

2.Prize the trim panel to release it with a pry tool

prize the trim panel to release it with a pry tool

3.Take out trim panel and disconnect antennas between panel and car

take out trim panel and disconnect antennas between panel and car

4.Unscrew 4 screws with a screw removal tool,2 screws on each side

unscrew 4 screws with a screw removal tool,2 screws on each side

5.Take out factory stereo gently and disconnect cables behind it

take out factory stereo gently and disconnect cables behind it

Operations for CD player removing is over here,and next we will learn how to install new head unit into the car.

2008 2009 2010 Jeep Commander car dvd installation:

6.Make connections on wires step by step as next pictures show

connect cables,antennas and connectors1

connect cables,antennas and connectors2

connect cables,antennas and connectors3

7.Then install the radio into right space,and you’d better have a tidy for the wires because the space is limited

install the radio into right space

8.After you have accomplished Jeep Commander radio mount,please don’t eager to firm screws and make removed panel back on their original places,you can turn on installed stereo first and see if all your antennas are connected correctly.If not,the screen of the unit can’t work and you need to remove head unit and connect wires again.

And if the stereo operates well,it shows that you have done it perfectly and then continue things behind it.Now you have owned a car with new radio,you may be very excited and can’t wait to enjoy it.

But I have doubt about whether you are familiar with its usage,and I advise you to search for some related information to help you operate it better and can avoid unnecessary damage to the machine.For example,this website may help you get it:http://www.seicane.com/hot-2008-2009-2010-jeep-commander-dvd-gps-car-stereo-3g-wifi-radio-rds-tv-bluetooth-mp3-ipod-iphone-aux-pop-rearview-camera-c202.

Enjoy yourself well when you are driving with upgraded car stereo!But please do not take it as your attention or even eyes.You still should pay attention to driving series like before.Installing a new unit is to help you enjoy more comfortable and convenient life,but not to instead of driving.

At last,wish you succeed finishing your removal and installation.It’s not a job just for professional workers,but also can be self-thing for drivers.But you should be patient and careful enough to do it and check the cables,which is a key point during whole procedure.

11Apr 2015

2011 2012 2013 Opel Astra dvd player with sat nav system installation

jeen ⋅ Leave a Comment

Head unit after installation,gps dvd with sat nav system touch screen of 2011 2012 2013 Opel Astra

head unit after installation,gps dvd with sat nav system touch screen of 2011 2012 2013 Opel Astra

When you see this car dvd you may feel confused for it’s a little different with your owned one from appearance and even functions.Original screen is not only used for watching,while this one has also operate the radio function.A lot of people have the desire to install a dvd player for his Opel Astra to catch up with society tendency and enjoy more convenient and comfortable life in car,which is on the same way on aim of this article,because you will see 2011 2012 2013 Opel Astra dvd player with sat nav system installation here.

Before you begin radio installation,you need to mind a series of things to make your work more smooth.

Precautions before installation:

1.Please turn off all car series and disconnect negative battery cable to avoid unnecessary damage to people

2.In addition,please keep original CD player and removed screws well in order to ensure that you can find needed objects when you have installed unit in at later time

Then we come to take about how to remove factory radio and install a new Opel Astra dvd player.It’s normal for you to find there is a little difference between your car radio appearance with the following one,don’t worry and you can take it as reference because stereos for a series of cars are generally the same.

2011 2012 2013 Opel Astra CD radio removal:

1.Get all things in this space out

get all things in this space out

2.Use a pry tool,pry surface file panel and remove it.(you may remove it totally after next step)

use a pry tool,pry surface file panel and remove it

3.Remove this screw and the other corresponding one

remove this screw and the other corresponding one

4.Release around big trim panel and remove it

release around big trim panel and remove it

5.Open up 2 small trim panels and remove 2 screws and other 2 under them

open up 2 small trim panels and remove 2 screws and other 2 under them

6.Remove lower notch and disconnect cables at the back of it

remove lower notch

disconnect cables at the back of it

7.After that,you can gently take out factory stereo and disconnect cables connected it,some connectors may be very tight and you can use a pry tool to help you

gently take out factory stereo and disconnect cables connected it

8.Pry around edges of upper button controls on the panel and remove it

pry around edges of upper button controls on the panel and remove it

2011 2012 2013 Opel Astra CD radio installation:

9.Install it on your new trim panel,and the same to lower button control

install it on your new trim panel

10.Connecting cables and connectors is shown in the following pictures:

connecting cables and connectors 1

connecting cables and connectors 2

connecting cables and connectors 3

connecting cables and connectors 4

connecting cables and connectors 5

11.After finishing connecting all wires,install new unit into the right space and reinstall the big trim panel and other panels to the car

reinstall the big trim panel and other panels to the car

12.With all things to be done,then you can turn on your radio and check whether it’s installed well and if functions can operate

If you think that you are lack of information about new radio,you can choose to visit some related websites,for example: http://www.seicane.com/oem-aftermarket-car-radio-upgrade-sat-navi-system-for-opel-astra-with-fm-am-3g-wifi-3-zone-pop-built-in-gps-dvd-bluetooth-ipod-rearview-c072 .You may get a lot detailed messages include images,module and so on.

This installation may be a little more complex than other ones on connecting wires,but I have confidence that most of you have made it clear with these 12 detailed steps and clear images.

Please remember that do not make jokes for your life,and also your beloved car.Thus please be soft and gentle to your stereo especially when you are doing something with panels,screws and other system.In addition,connecting the antennas to correct places is an very significant job during the installation.Though it can be a self-done thing indeed but it’s on the condition that we are careful enough and take everything serious.

This new dvd has more useful functions,such as navigation system which can point you directions,bluetooth function,and you can also watch videos when you are free or sure that it’s very safe.With no doubt that we can enjoy a good journey in car.

10Apr 2015

How to install Renault Duster multimedia navigation system

jeen ⋅ Leave a Comment

Recently more and more people are seeking for more convenient and entertaining things from busy life,some of them may pay attention on cars,which has become a normal transportation in daily society.If we know how to install Renault Duster multimedia navigation system,it’s not a bad choice to upgrade factory car stereo if your car radio without gps nav system and touch screen.This unit become popular for it is upgraded with some applied functions to drivers,which can bring them much convenience.

Thus will you ask the professional staff to help you complete this work?Actually this can completely can be a self-done thing with correct installation instructions.Please do not do any self-operations or maintains when you have no experience or without any guide,it will be dangerous.Therefore having a general idea for removing and installing head unit for Renault Duster is very necessary.

And you can have a good look at following upgrade procedure,it may help you to know the general steps:

Renault Duster aftermarket stereo installation:

1.Be patient to pry the trim panel and remove it with your hand,it’s not hard to remove so don’t need a lever

be patient to pry the trim panel and remove it with your hand

2.Put the removed trim panel on the front of the space to continue other steps more easily

put the removed trim panel on the front of the space to continue other steps more easily

3.Remove these four screws which firm factory stereo on the position

remove these four screws which firm factory stereo on the position

4.Take out the stereo

take out the stereo

5.Disconnect cables connected them

disconnect cables connected them

6.After that,remove four screws as the picture point,this one and upper one,and the other two on other side

remove four screws as the picture point,this one and upper one,and the other two on other side

7.And you need to be careful not let the trim panel slip down,which may obstruct you

8.You may need to remove screws under the panel if it’s needed during your installation

you may need to remove screws under the panel

You can have a little rest if finishing removal staffs,because you have completed an important part of this operation.The following thing is to mount Renault Duster multimedia navigation system which can draw you a map on the touch screen and you won’t get lost with it.The installation steps are as follows:

First make sure all your removed panels and screws are set a available places for use again.If your removed stereo has screws on it,then you need to unscrew them,get down original dashboard,connect cables of new unit to those wiring connected car.Sort wires well and put this head unit into it,don’t eager to reinstall other things,you can turn on the radio first.If it can work,then continue to make all up down things back to right positions,at this time all work is completed.

Here is the new unit after installation,aftermarket stereo with gps usb audio system of Renault Duster,it also can be mounted in your beloved car if you find their dashboard are alike.

new unit after installation,aftermarket stereo with gps usb audio system of Renault Duster

The screen of it can be operated by your hand,it’s just like we use cellphones.All operations can be achieved on this screen.If you need to know more about it,here is a corresponding website for you:http://www.seicane.com/oem-in-dash-radio-replacement-mp5-player-for-renault-duster-built-in-gps-pop-dvd-bluetooth-support-anti-shock-2-channel-aux-3g-wifi-c157.

1 2 Next »

Monthly Archives: April 2015

Installation steps for 2010 2011 Mitsubishi Lancer double din radio dvd support HD 1080P video

Installation guide for 2009 KIA Sportage aftermarket sat nav system

How to install 2012 Hyundai I40 gps radio with bluetooth music

Installation guide for 2006-2011 Toyota Camry dvd player gps navigation system

How to install 2008-2013 Audi Q5 aftermarket radio with navigation system

How to mount 2005 2006 Mercedes Benz CLK W209 gps radio with touch screen

2012 2013 Subaru Outback radio dvd with touch screen installation

2008 2009 2010 Jeep Commander radio gps navigation installation

2011 2012 2013 Opel Astra dvd player with sat nav system installation

How to install Renault Duster multimedia navigation system

Post Navigation

Recent Posts

Views

Recent Comments

Archives

Subscribe

Categories

Meta