Monthly Archives: June 2015

You are browsing the site archives by month.

Firstly,we can have a look at this picture:it’s head unit after installation,aftermarket audio navigation system of 2008 2009 2010 2011 Toyota Auris.

head unit after installation,aftermarket audio navigation system of 2008 2009 2010 2011 Toyota Auris

head unit after installation,aftermarket audio navigation system of 2008 2009 2010 2011 Toyota Auris

Are you the owner of Toyota Auris from 2008 to 2011 and is your car stereo looks like this one?Maybe most of you haven’t upgraded it for taking it as a complex thing.But actually it’s not if you can find right and detailed installation steps for 2008 2009 2010 2011 Toyota Auris navigation system with bluetooth dvd.

From the picture at the beginning,we can find that this new unit is different from original ones on its outside appearance and functions.Many people choose to replace original stereo with a new one just for these changes.With high speed development of technology,people can also enjoy its labor work very quickly.

If you are not very familiar with this unit and have a lot of questions,I advice you to visit following website which has detailed information for it:http://www.seicane.com/double-din-sat-nav-speaker-upgrade-for-2008-2009-2010-2011-toyota-auris-with-hd-touch-screen-radio-rds-cd-dvd-player-tv-tuner-3g-wifi-aux-ipod-steering-wheel-control-c028.

Searching information about car dvd installation include reading essays which will show you specific steps to achieve it,so it’s right for you to have a look at it,no matter what kind of situation you are in,it will benefit your life more or less.

There are about 7 steps to achieve the process of Toyota Auris navigation installation,and this process is mainly on the removal steps.Because if you finished removal affairs it means that you have finished most of the installation.Removal affairs generally can be divided into four parts,including remove trim panel,loose screws,remove dashboard the CD player.

2008 2009 2010 2011 Toyota Auris car stereo removal and navigation installation:

1.Unclip side panels from higher center console with the help of panel removal tool

Unclip side panels from higher center console with the help of panel removal tool

Unclip side panels from higher center console with the help of panel removal tool

If you feel a little hard,you can open up the left beside console to achieve this

open up the left beside console

open up the left beside console

2.Take down four screws which parted two on each side where the consoles were removed

Take down four screws which parted two on each side

Take down four screws which parted two on each side

3.You can remove the dashboard gently but also easily after four screws are taken down

remove the dashboard gently

remove the dashboard gently

4.Then take the original CD player out

take the original CD player out

take the original CD player out

5.Disconnect all the cables one by one

Disconnect all the cables one by one

Disconnect all the cables one by one

6.Connect all cables between new unit and those of the car, install it into right place

7.Put the dashboard inand firm screws which were put aside

It won’t take you too much time to accomplish the installation procedure.Please be gentle to those things that are removed by you,such as panels and you also set the screws at a visible place for easy to find.

I believe that your life especially when you are on a journey with car will be more colorful when it has a such car dvd player,and the gps nav system is one of the most popular functions.But before you enjoyed all these,keep your safety in mind when you are upgrading your car radio.

Warm tips:

Multi-functions of new head unit are good indeed,but do not let them instead of your attention or vigor,or it can be very dangerous.

You can enjoy the beautiful music or listen to radio tuner when you are busy driving.

For more car stereos,you can visit http://www.seicane.com/ to have a better choice.

 

head unit after installation,dvd player of 2010 2011 2012 Toyota Verso

Head unit after installation,aftermarket radio gps of 2010 2011 2012 Toyota Verso

With rapid development of technology, economy is developing at a very amazing speed.People’s life standard is getting higher and higher. Cars have became an usual family transportation,thus people will try their best to make car settings more comfortable and convenient.

Roads become complex with the exploitation of land,therefore installing a precise GPS navigation system is very necessary,it benefits people not only to spend more vigor on thinking about where to go next but also safer.

There’s no doubt that we will pay more attention on 2010 2011 2012 Toyota Verso in dash radio gps  installation,which will be showed in the following part.

Precautions before installation:

1.Please check the appearance and the unit functions before install the unit

2.Please do not shorten the GPS antenna,it may lead to antenna problem

3.Please don’t make the GPS antenna winding the steering wheel and shift lever,it will be dangerous

2010 2011 2012 Toyota Verso original radio removal and radio gps installation:

1.Use a pty tool to lever the right and the left part and disconnect the cables

Use a pty tool to lever  the left part

Use a pty tool to lever the left part

Use a pty tool to lever  the right part

Use a pty tool to lever the right part

2.Take out two screws on both sides with a screwdriver and put them aside for usage once again

Take out two screws on both sides with a screwdriver

Take out two screws on both sides with a screwdriver

3,Remove dashboard of the head unit

Remove dashboard of the head unit

Remove dashboard of the head unit

4.Gently make the cables that connected with the dashboard disconnected

Gently make the cables that connected with the dashboard disconnected

Gently make the cables that connected with the dashboard disconnected

When you have finished these steps,you can have a look at this radio and see whether it’s same with the next image:

radio after dashboard removal

radio after dashboard removal

It’s not over yet.There are still 3 steps to achieve it.

5.remove screws beside the CD player and take out the CD player

6.connect the cables as the instructions said,install your new unit in it

7.fasten the screws in original places

It’s the basic installation steps for Toyota Verso radio gps. All the dvd players are mostly same and differs at little place,so it’s normal to find some difference and there will not be any large impact.

In order to make sure that you can mount the gps navigation system more precise and safer, I will give you some tips in the installation and usage of the unit.

1.Please don’t use strong chemicals, cleaners, strong detergent wash the machine

2.Please use a clean soft fabric wipe the screen,without using ordinary fabric

3.Please use the touch screen pen to operation unit, do not use other sharp objects, if not it will damage the screen

4.Please protect the original display when the staff is dismounting the original CD in order to use the original screw again

For more information or when you meet problems that can’t deal with,you can visit this website:http://www.seicane.com/2010-2011-2012-toyota-verso-in-car-autoradio-gps-system-bluetooth-music-am-fm-radio-cd-dvd-player-tv-tuner-3g-wifi-mp3-mp5-ipod-aux-dvr-1080p-steering-wheel-control-c133  , or ask people who worked directly for this market for help,trust that nothing will obstruct the work.

 

 

At first,we can have a look at following picture which is the head unit after installation,dvd gps navigation system with 3D and google map of 2010 2011 2012 Toyota Verso.If you find that the trim panel of it is same to yours then it fits for your car.

Head unit after installation,dvd gps navigation system with 3D and google map of 2010 2011 2012 Toyota Verso

Head unit after installation,dvd gps navigation system with 3D and google map of 2010 2011 2012 Toyota Verso

There are many people who are owners of 2010 2011 2012 Toyota Verso are thinking about to upgrade their car head unit themselves.But have no idea about Detailed installation instructions for 2010 2011 2012 Toyota Verso dvd gps with 3D MAP.

Nowadays cars have became a normal family transportation,and many car owners are trying to make their car better to enjoy more convenient and comfortable life.With more complex roads, installing a precise Toyota Verso dvd radio in car is very necessary,it helps people not only to spend less vigor on thinking about where to go but also safer.There is no doubt that reading or searching some materials of this aspect is a good choice to you.

Before starting to know it,there are some announcements for you.

Precautions before installation:

1.Please check out car’s appearance and the unit functions before your work

2.Do not shorten the GPS cable,which may lead to antenna problem

3.Please don’t make the GPS antenna winding the steering wheel and shift lever,or it will be dangerous.

2010 2011 2012 Toyota Verso original stereo removal:

1.Use a lever to pry right and left part and disconnect the cables

Use a lever to pry right part of the unit

Use a lever to pry right part of the unit

Use a lever to pry left part of the unit

Use a lever to pry left part of the unit

2.Remove two screws on both sides with a screwdriver and put them aside for usage once again

Remove two screws on both sides with a screwdriver

Remove two screws on both sides with a screwdriver

3.Pull trim panel off the head unit

Pull trim panel off the head unit

Pull trim panel off the head unit

4.Gently make the cables that connected with the panel disconnected

Gently make the cables that connected with the panel disconnected

Gently make the cables that connected with the panel disconnected

When you have finished above steps,you can have a look at the removed radio and see if you have removed the stereo totally.And make a comparison between your removed one and next one:

The dashboard after original radio removal

The dashboard after original radio removal

Your work is not over yet,there are still 3 steps to achieve it.

2010 2011 2012 Toyota Verso aftermarket dvd installation:

5.Remove screws beside the CD player and take out the CD player

6.Make connections on all cables as the instructions said,after that install your new unit in it

7.Make removed screws and other parts of the unit back to their original positions

This is basically the installation procedure for Toyota Verso GPS dvd audio system.If you want to know better about the new stereo,you can visit some helpful websites,for example:http://www.seicane.com/2010-2011-2012-toyota-verso-in-car-autoradio-gps-system-bluetooth-music-am-fm-radio-cd-dvd-player-tv-tuner-3g-wifi-mp3-mp5-ipod-aux-dvr-1080p-steering-wheel-control-c133.

We know a fact that car radios are mostly same and differs at little place,so it’s normal to find some difference and notice that do not do self-work when you are not sure about it,you’d better ask a skilled man to help you solve the problem to ensure your security.

In a word,you should make adequate preparations for this work.Wish you good luck!

If this one doesn’t fit your car or you want to choose another one,you can visit http://www.seicane.com/,there are a lot of car stereos there.