2016 Januarycar dvd blog

30Jan 2016

How to upgrade a 2007-2010 Ford Expedition car stereo with Bluetooth DVD player touch screen GPS navigation

Here shows a 2007-2010 Ford Expedition car stereo from Seicane after installation. It looks appealing, doesn’t it?

2007-2010 Ford Expedition car stereo after installation

If you are a car owner of Ford Expedition, and you want to enjoy more convenience and enjoyment in your car, then you can take upgrading your factory radio into consideration. A new car stereo can not only bring your a lot of convenience with its practical features but also huge tons of enjoyment with its entertainment functions.

To know the installation instruction is helpful for you to upgrade your factory radio. With a correct installation guide and some related installation experience, you can even achieve the installation on your own. But if it’s the first time for you to install a new car stereo, you’d better install it in a car stereo upgrade center or ask a professional to help you. The following detailed 2007-2010 Ford Expedition car stereo installation guide is for your reference.

Here are some tips for you before the installation:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.

2007-2010 Ford Expedition car stereo installation guide

Step 1: Remove the trim around gear shifter.

2007-2010 Ford Expedition car stereo installation step 1

Step 2: Remove screws securing center console lid with a screwdriver.

2007-2010 Ford Expedition car stereo installation step 2

Step 3: Remove the center console trim.

2007-2010 Ford Expedition car stereo installation step 3

Step 4: Remove console side panels on both driver and passenger sides.

2007-2010 Ford Expedition car stereo installation step 4

Step 5: Remove bolts securing radio bezel and AC controls.

2007-2010 Ford Expedition car stereo installation step 5

Step 6: Unplug AC controls (from passenger side).

2007-2010 Ford Expedition car stereo installation step 6

Step 7: Remove the radio bezel and AC controls.

2007-2010 Ford Expedition car stereo installation step 7

Step 8: Remove screws securing radio to the vehicle.

2007-2010 Ford Expedition car stereo installation step 8

Step 9: Take the original radio out of the dash.

Step 10:Make antennas and cables of the new Seicane car stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.

Step 11: Put the new Seicane car stereo into the dash.

Step 12: Turn on the new Seicane car stereo and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

It’s normal if you have any questions during the installation of this 2007-2010 Ford Expedition car stereo, please ask your dealer or a professional for help. Make sure you are clear about everything before you begin to install it. You also need to make sure to buy a fitting car stereo for your car, if you have no idea, you can also refer to the following great Seicane 2007-2010 Ford Expedition car stereo as follows:

http://www.seicane.com/seicane-s127302-quad-core-pure-android-4-4-4-dvd-gps-in-dash-radio-system-for-2005-2009-ford-mustang-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera

This 2007-2010 Ford Expedition car stereo with a great DVD player is guaranteed to bring you lots of exhilaration. Besides, you can also play whatever you like by Ipod/USB wired connection to keep yourself and your passengers enjoyable all the way. The GPS system and the Bluetooth technology provides you with the accurate directions as well as a safe and cheerful driving experience.

Wish you will like this wonderful 2007-2010 Ford Expedition car stereo and enjoy your driving from now on!

26Jan 2016

An easy installation guide for a 2006-2011 Honda CR-V head unit with Bluetooth Mirror Link OBD2 GPS DVD player

eric ⋅ Leave a Comment

Here comes an attractive Seicane Honda CR-V head unit after installation. It can be easily installed in a 2006-2011 Honda CR-V without any gap. The great convenience and enjoyment it brings to you will must satisfy you.

2006-2011 Honda CR-V head unit after installation

If you want to have a more comfortable car life and a relaxing driving experience, it’s wise of you to upgrade your factory radio with a modern aftermarket head unit with a lot of features which can meet all your needs in a car. Some car owners may worry about the installation of a new head unit, in fact, the installation is quite simple. With some related experience and a correct installation guide, you can easily install a head unit on your own. If you have a same or similar dashboard with the above picture, you can refer to the following detailed Honda CR-V head unit installation instructions.

Precautions:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.

2006-2011 Honda CR-V head unit installation guide

The original radio of the car.

2006-2011 Honda CR-V head unit installation step 1

2. Use a screwdriver to push up the heater control on the right side. Do the same on the left side.

2006-2011 Honda CR-V head unit installation step 2

Take out the heater control with your hands.

2006-2011 Honda CR-V head unit installation step 3

4.Pry the top of the decoration panel with removal tools and remove it with your hands, and put it aside.

2006-2011 Honda CR-V head unit installation step 4-1

2006-2011 Honda CR-V head unit installation step 4-2

5.Push out the vent panel with your hands at the back and set it on the top of the dashboard.

2006-2011 Honda CR-V head unit installation step 5-1

2006-2011 Honda CR-V head unit installation step 5-2

6.Remove four screws(two on the top, the other two at the bottom) holding the radio in the dash.

2006-2011 Honda CR-V head unit installation step 6

Take the original radio out of the dash with your hands.

2006-2011 Honda CR-V head unit installation step 7

8.Unplug the connectors at the back of the original radio.

2006-2011 Honda CR-V head unit installation step 8

Make antennas and cables of the new Seicane head unit connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
Put the new Seicane head unit into the dash.
Turn on the new Seicane head unit and check whether the unit is working properly.
Install screws and the panel, and put everything into their original place.

If you find the above steps are difficult for you, it’s suggested you go to a car stereo upgrade center to install it or ask a professional technician to help you. Wish it can be helpful for you if you are going to do it on your own.

To make sure you have a successful upgrading, it’s essential you have a specific head unit which is suitable to your car. Because different head units are made for different cars. If you have no idea which head unit can fit your car, I’d like to share an intelligent Honda CR-V head unit from Seicane to you, which can be seamlessly installed in your car, please click:

http://www.seicane.com/seicane-s1276898-8-inch-quad-core-2006-2011-honda-cr-v-android-4-4-4-dvd-navigation-car-stereo-with-3g-wifi-radio-rds-bluetooth-mirror-link-obd2-16g-flash-rearview-camera-steering-wheel-control-hd-1080p-video-mp3

This remarkable Honda CR-V head unit comes with a wide range of features, such as a DVD player and a radio integrated with a GPS system and Bluetooth. The GPS can provide you with the real-time guidance to help you find your way easily. The Bluetooth technology allows you to easily sync your mobile phone for hands-free conversations and streaming music. You can also utilize the USB/iPod connection to play whatever you like.

Upgrade your factory radio with this amazing Honda CR-V head unit right now and enjoy all your trips in the future.

25Jan 2016

A step-by-step installation guide for a 2006-2011 Honda Civic car stereo with Quad-core CPU 3G WiFi DVD GPS

eric ⋅ Leave a Comment

All kinds of information are upgrading with a rapid speed nowadays, the traffic information is no exception. Therefore, it’s essential for you to have a precise GPS navigation system to guide you to find your way to your destination. During a long trip, you must want to have something to relax in your car, in that case, a powerful multimedia player is helpful. Look at the following unit, it’s a multifunctional Honda Civic car stereo with GPS navigation function and a DVD player after installation specially made for 2006-2011 Honda Civic.

2006-2011 Honda Civic car stereo after installation

If you have a Honda Civic from 2006 to 2011 and have the exactly same or similar dashboard with the above picture, you can refer to the following Honda Civic car stereo installation instruction to help with your installation.

Precautions:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.

2006-2011 Honda Civic car stereo installation guide

The original CD player.
2006-2011 Honda Civic car stereo installation step 1

2. Pry the cover of the slot below the CD player with a lever and remove it.

2006-2011 Honda Civic car stereo installation step 2

Remove two screws inside the slot with a ninety-degree screwdriver.

2006-2011 Honda Civic car stereo installation step 3

4.Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel.

2006-2011 Honda Civic car stereo installation step 4

Remove one screw in the dash.

2006-2011 Honda Civic car stereo installation step 5

6.Remove the vent panel.

2006-2011 Honda Civic car stereo installation step 6

Unplug the connectors beneath the panel.

2006-2011 Honda Civic car stereo installation step 7

8.Pry the edges along the panel of the original radio, then remove it, after that, take the original CD player out of the dash.

2006-2011 Honda Civic car stereo installation step 8

Unplug the connectors at the back of the original radio.

2006-2011 Honda Civic car stereo installation step 9-1

2006-2011 Honda Civic car stereo installation step 9-2

Disconnect the antenna and the other connector on the other side of the original radio.

2006-2011 Honda Civic car stereo installation step 10-1

2006-2011 Honda Civic car stereo installation step 10-2

11.Make antennas and cables of the new Seicane car stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.

Put the new Seicane car stereo into the dash.
Turn on the new Seicane car stereo and check whether the unit is working properly.
Install the panel and screws, and put everything into their original place.

If you find the dashboard in the above installation guide is different from yours, please don’t worry, the installation is similar, it won’t have much impact on the installation. If you think all the steps are too hard for you to understand or operate, you’d better ask a professional to help you or directly go to a car stereo upgrade center to have it installed.

A suitable car stereo for your car is quite important if you want to have a satisfying upgrade. If you don’t know which car stereo can fit your car, I’d like to share a great Honda Civic car stereo with you, please click:

http://www.seicane.com/seicane-s127658l-16g-android-4-4-4-autoradio-navigation-aftermarket-stereo-for-2006-2011-honda-civic-with-quad-core-cpu-3g-wifi-dvd-radio-rds-bluetooth-mirror-link-obd2-steering-wheel-control-quad-core-cpu-aux

This modern Honda Civic car stereo comes with an advanced Android 4.4.4 operating system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor to smooth the operation. With the GPS system, you won’t get lost even you are in an unfamiliar place. To pair your mobile phone which has Bluetooth with this unit, you can make and receive calls without taking your hands off the steering wheel control as well as enjoy your favorite music while you are driving.

Under a big discount right now, it’s time to get this Honda Civic car stereo and install it in your car. Wish you will enjoy your new car stereo and have a good time with it.

25Jan 2016

A detailed installation instruction for a 2007-2013 Toyota Land Cruiser 200 radio with Mirror Link OBD2 DVD player GPS navigation

eric ⋅ Leave a Comment

Look at the picture below, it’s a Seicane 2007-2013 Toyota Land Cruiser 200 radio after installation. Do you have a similar or a same dashboard as it? If your answer is yes, then this article is helpful for you to install a new head unit in your car by yourself. To install a car stereo on your own, you can not only save quite a few money but also have a great sense of fulfillment. Wish you can get some help from the following detailed 2007-2013 Toyota Land Cruiser 200 radio installation guide.

2007-2013 Toyota Land Cruiser 200 radio after installation

Some precautions before the installation:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.

2007-2013 Toyota Land Cruiser 200 radio installation instructions:

1.Remove the two blots off both sides of handbrake.

2007-2013 Toyota Land Cruiser 200 radio installation step 1

2.Remove screws with your hand.

2007-2013 Toyota Land Cruiser 200 radio installation step 2

3.Remove left and right loosed panel after the bolts are taken off.

2007-2013 Toyota Land Cruiser 200 radio installation step 3

4.Make the cable between them disconnected.

2007-2013 Toyota Land Cruiser 200 radio installation step 4

5.Take the screw out with your hands.

2007-2013 Toyota Land Cruiser 200 radio installation step 5

6.Remove five screws out with a screwdriver as the pictures show.

Remove the first screw

2007-2013 Toyota Land Cruiser 200 radio installation step 6-1

Remove the second and third screws

2007-2013 Toyota Land Cruiser 200 radio installation step 6-2

Remove the fourth and fifth screws

2007-2013 Toyota Land Cruiser 200 radio installation step 6-3

7.Gently take the original radio out of the dash.

2007-2013 Toyota Land Cruiser 200 radio installation step 7

8.Gently unplug the harness at the back of the original radio.

2007-2013 Toyota Land Cruiser 200 radio installation step 8

Plug the harness to the back of the new Seicane radio.
Connect wires of the new Seicane radio as the user manual shows. You need to be very careful when you are doing this for it may affect the whole procedure. If you are not clear how to wire the cables, please refer to the wiring diagram.
Turn on the new Seicane radio to check if everything works well.
If everything is ok, put the new Seicane radio into the dash.
Firm the screws, the panel and the bolts into their original place.

The above is the step-by-step installation instruction for a 2007-2013 Toyota Land Cruiser 200 radio. If you have any question about it, please seek help from your dealer or a professional. By the way, if it’s the first time you do it, you need to make sure every step before the installation. If you think it too hard to understand all the steps, it’s suggested you go to a car stereo upgrade center to install it or ask a professional to help you.

A suitable aftermarket car radio matters a lot if you want to have a satisfying upgrade. You need to confirm that the new car radio can work well with your car as well as be installed in your car seamlessly. If you don’t know which car radio can fit your car, I’d like to recommend an amazing Toyota Land Cruiser 200 radio from Seicane to you, please click:

http://www.seicane.com/seicane-s128102-16g-8-inch-android-4-4-4-autoradio-gps-navigation-system-for-2007-2013-toyota-land-cruiser-200-with-cd-dvd-player-bluetooth-3g-wifi-mirror-link-obd2-16g-quad-core-cpu-backup-camera

This Toyota Land Cruiser 200 radio comes with a wide range of practical features including DVD player, GPS navigation system, Bluetooth, radio, TV, iPod, USB and SD connection, you can get what you expect from a head unit. You are also allowed to manage documents like WORD/EXCEL/POWERPOINT/PDF/TXT freely in your car just as you are in the office. Just take this fantastic unit to enjoy the great convenience and enjoyment on your way!

22Jan 2016

9 easy steps to upgrade a 2012 2013 2014 VW Volkswagen Passat CC head unit with a Quad-core CPU 16G Flash DVD GPS

eric ⋅ Leave a Comment

If you are a car owner of 2012 2013 2014 VW Volkswagen Passat CC, you must want to have a comfortable car life and enjoy the greatest convenience in your car while you are driving. How can you get both of them at the same time? Just upgrade your factory radio with an all-in-one head unit. You will enjoy the greatest fun as well as the convenience it brings to you. Look at the following picture, which is a Seicane 2012 2013 2014 VW Volkswagen Passat CC head unit after installation. If you have the same or similar dashboard, you can follow the detailed installation instructions to help you with your upgrading.

2012 2013 2014 VW Volkswagen Passat CC head unit after installation

There are some precautions before installation:

Ensure the power cable is disconnected for safety.
Make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last before connecting.

2012-2014 VW Volkswagen Passat CC head unit installation guide

1)Lift the latch at the bottom of the decoration panel.

2012 2013 2014 VW Volkswagen Passat CC head unit installation step 1

2) Remove four screws holding the original radio into the dashboard on the left and right sides with a screwdriver.

2012 2013 2014 VW Volkswagen Passat CC head unit installation step 2

3) Take the factory radio out of the dashboard, then unplug all the connectors exposed at the back of it.

2012 2013 2014 VW Volkswagen Passat CC head unit installation step 3

4) Connect the GPS aerial for new Seicane head unit and the rearview camera connectors (optional).

2012 2013 2014 VW Volkswagen Passat CC head unit installation step 4

5)Connect the new Seicane radio aerial conversion lines with the factory radio aerial.

6)Plug the connectors to the new Seicane head unit.

7)Connect all the harness, put the new Seicane head unit into the dash, and fix all the screws.

8)Install the decoration panel and push it inside until the latch lock it.

9)Turn on the new Seicane head unit to conduct a comprehensive check if all functions work well.

The installation is actually quite easy. But if you have no such experience at all, you’d better do it under the guidance of a professional. Before the installation, you need to figure out every step so as to make your removal and installation successful.

Besides, you have to confirm the compatibility of the new head unit with your car. Only a fitting head unit can be perfectly installed and work well with your car. If you don’t have a suitable head unit, I’d like to recommend a good 2012 2013 2014 VW Volkswagen Passat CC head unit from Seicane to you.

http://www.seicane.com/seicane-s121011-10-2-inch-android-4-4-4-radio-dvd-head-unit-gps-system-for-vw-volkswagen-passat-cc-with-quad-core-cpu-16g-flash-bluetooth-mirror-link-obd2-3g-wifi-rearview-camera-dual-way-canbus-aux

This VW Volkswagen Passat CC head unit is designed as the original radio, so it can be installed in your car seamlessly. With a large 10.2 inch HD 1024*600 multi-touch screen, it’s easy to operate and ideal for viewing.

The GPS navigation system provides the accurate direction for you to travel to your destination on time. You can wirelessly pair your Bluetooth cell phone with this unit to have hands-free calls and streaming music, which can bring you an absolutely safe and pleasant journey all the time.

Under a big discount right now, it’s wise of you to take this VW Volkswagen Passat CC head unit without any hesitation. Wish you will enjoy your upgrading and have a good time!

21Jan 2016

An easy installation guide for a 1998-2005 Mercedes Benz S Class W220 head unit with DVD player GPS 16G Flash 3G WiFi

eric ⋅ Leave a Comment

Look at the picture below, it’s a 1998-2005 Mercedes Benz S Class W220 head unit after installation from Seicane, it is quite amazing, isn’t it? Some people may think it hard to install such a head unit into a car. In fact, that’s not the case. Without much expertise, you can also achieve it on your own with the guidance of the installation instructions. But if you totally have no experience on it before, it’s suggested you install it with the help of a professional or go to a professional car stereo center to have it installed.

1998-2005 Mercedes Benz S Class W220 head unit after installation

Here are some tips before the installation:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure security.
A lever and a screwdriver need to be prepared before the installation.

1998-2005 Mercedes Benz S Class W220 head unit installation guide

The original CD player.

1998-2005 Mercedes Benz S Class W220 head unit installation step 1

2 Set the parking brake and shift to a lower gear to allow the brake disc to open up.

1998-2005 Mercedes Benz S Class W220 head unit installation step 2-1

1998-2005 Mercedes Benz S Class W220 head unit installation step 2-2

3.Remove one screw on the right of the brake disc. Then remove the other screw on the left in the same way. After that, pull out the brake disc.

1998-2005 Mercedes Benz S Class W220 head unit installation step 3-1

1998-2005 Mercedes Benz S Class W220 head unit installation step 3-2

Pry the edges of the panel along the sides with a lever, and remove the panel.

1998-2005 Mercedes Benz S Class W220 head unit installation step 4-1

1998-2005 Mercedes Benz S Class W220 head unit installation step 4-2

Remove four screws holding the original radio in the dashboard with a screwdriver.

1998-2005 Mercedes Benz S Class W220 head unit installation step 5

Take the original radio out of the dashboard.

1998-2005 Mercedes Benz S Class W220 head unit installation step 6

Disconnect the connector at the back of the original radio.

1998-2005 Mercedes Benz S Class W220 head unit installation step 7

Connect the connector to the new Seicane radio.
Connect cables of the new Seicane radio as the user manual shows. If you are not clear about that, you can also refer to a wiring diagram which can be got from your dealer.
Turn on the new Seicane radio to carefully check if everything works well.
Put the new Seicane radio back into the dashboard.
Install all screws and the panel into their original place. And put back the brake disc.

You may have some questions during the whole process of the installation, you can ask your dealer or a professional for help. The installation is not too difficult, but if you find it too hard for you to understand all the steps, you’d better have it installed by a professional or go to a car stereo upgrade center to install it.

Before the installation, you need to confirm that your new head unit is compatible with your car and can be installed in your car without any gap. If you are not sure which head unit can fit your car, please feel free to click the link below to check or consult, it’s a great Mercedes Benz S Class W220 head unit from Seicane.

http://www.seicane.com/seicane-s127509-quad-core-1998-2005-mercedes-benz-s-class-w220-s280-s320-s320-s400-android-4-4-4-dvd-gps-car-a-v-system-with-16g-flash-3g-wifi-radio-rds-bluetooth-mirror-link-obd2-hd-1024-600-multi-touch-screen-s127509

This advanced Mercedes Benz S Class W220 head unit is loaded with a strong RK3188 1.6 GHz Cortex A9 Quad-core CPU which can greatly enhance the ability of processing the data and the massive graphics.

With built-in GPS, this head unit can guide you to any unfamiliar place with the accurate directions, and you can find any spot that you need according to the points of interests(POIs).

Keep yourself and your passengers safe all the way by wirelessly linking your Bluetooth mobile phone with this unit. There are a lot of entertainment options for you to relax and amuse yourself on the long trips.

Go with this remarkable Mercedes Benz S Class W220 head unit and enjoy all your trips. Good luck to you!

20Jan 2016

How to replace a 2004 2005 2006 Mercedes Benz Viano Vito radio with Bluetooth GPS navigation DVD player touch screen

eric ⋅ Leave a Comment

When you feel tired after driving for a long time in your car, you may want to relax yourself with a powerful car radio which can support more features, so that you can play whatever you like. In that case, most car owners choose to upgrade their car radios. It is actually a good idea. If you have a 2004 2005 2006 Mercedes Benz Viano Vito, please look at the below picture. With the same or similar dashboard, you can install this wonderful Seicane 2004 2005 2006 Mercedes Benz Viano Vito radio in your car. And the following detailed installation guide can also be much helpful for you.

2004 2005 2006 Mercedes Benz Viano Vito radio after installation

Some tips before the installation :

Please disconnect the power before the installation.
Please prepare unlock tools r before the removal and the installation.
Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

2004 2005 2006 Mercedes Benz Viano Vito radio installation guide

The picture of the original CD player and 6-disc CD player.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 1

First detach the gear shift panel.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 2

Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 3

Remove the car charger and ashtray assembly.
2004 2005 2006 Mercedes Benz Viano Vito radio installation step 4
Use a screw driver to remove the screw marked with a red circle.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 5

Pry the air conditioner panel out with a plastic lever.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 6

Remove the original air conditioner panel.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 7

Remove the heated seat and control panel assembly.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 8

Pay attention to this buckle.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 9

Remove two screws.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 10

Pull out the original CD player.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 11

Please be careful not to stretch the wiring harness behind the assembly.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 12

The wiring diagram as follows. Put the plug of the car in the socket of the unit.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 13

The wiring diagram.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 14

The wiring diagram.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 15

Radio antenna lead.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 16

Install the new Seicane radio back after the wiring harness has bee connected. Fasten the four screws.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 17

Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 18

Reinstall cigarette lighter.

2004 2005 2006 Mercedes Benz Viano Vito radio installation step 19

Turn on the new Seicane radio and have a careful check if everything works well.

The above is all the instructions on how to install a 2004 2005 2006 Mercedes Benz Viano Vito radio. Before the installation, you’d better read it carefully and make clear everything. For any questions, you can turn to your dealer or a professional for help. Besides, you need to make sure you have a suitable radio for your car. You can refer to the following link which is an ideal 2004 2005 2006 Mercedes Benz Viano Vito radio from Seicane.

http://www.seicane.com/seicane-s127507-double-din-android-bluetooth-dvd-in-dash-gps-stereo-for-2004-2005-2006-mercedes-benz-viano-vito-with-flash-3g-wifi-radio-tuner-mirror-link-obd2-hd-1024-600-multi-touch-screen-cpu-s127507

It comes with the most advanced Android 4.4.4 operation system greatly smoothes the operation. The built-in GPS can support updating the latest traffic information and provide turn-by-turn voice direction for you to get to the desired location. You can enjoy playing DVDs, VCD, Bluetooth music, FM/AM radio tuner to enrich your journey. A safe driving can also be available by pairing your Bluetooth cell phone with this unit.

Just enjoy a brand new driving experience with this magic Mercedes Benz Viano Vito radio right now!

19Jan 2016

Detailed installation instructions of a 2000-2005 Mercedes Benz C Class W203 car stereo with Bluetooth DVD GPS navigation WIFI

eric ⋅ Leave a Comment

No matter you are keeping up with the trend or just want to have more functions to get more convenience and entertainment in your car, replacing your factory radio with a new aftermarket car stereo is a good choice for you. The following is a picture of a modern Seicane 2000-2005 Mercedes Benz C Class W203 car stereo after installation, if you find you have the same or similar dashboard, then this unit can be compatible with your car. And you can read this article carefully to have a general idea of the installation, with which you can probably achieve the installation on your own.

2000-2005 Mercedes Benz C Class W203 car stereo after installation

Some tips before the installation:

Please disconnect the power before the installation.
Please prepare unlock tools r before the removal and the installation.
Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

2000-2005 Mercedes Benz C Class W203 car stereo installation guide

The picture of the original CD player and 6-disc CD player.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 1

First detach the gear shift panel.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 2

Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 3

Remove the car charger and ashtray assembly.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 4

Use a screw driver to remove the screw marked with a red circle.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 5

Pry the air conditioner panel out with a plastic lever.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 6

Remove the original air conditioner panel.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 7

Remove the heated seat and control panel assembly.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 8

Pay attention to this buckle.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 9

Remove two screws.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 10

Pull out the original CD player.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 11

Please be careful not to stretch the wiring harness behind the assembly.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 12

The wiring diagram as follows. Put the plug of the car in the socket of the unit.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 13

The wiring diagram.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 14

The wiring diagram.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 15

Radio antenna lead.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 16

Install the new Seicane car stereo back after the wiring harness has bee connected. Fasten the four screws.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 17

Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 18

Reinstall cigarette lighter.

2000-2005 Mercedes Benz C Class W203 car stereo installation step 19

Turn on the new Seicane car stereo and have a careful check if everything works well.

You may have some questions during the whole process of the installation, in that case, it’s advised you consult your dealer or a professional for help. If you can get a wiring diagram, things also become easier. However, if you think it too difficult to understand all the steps, you’d better ask for a professional for help.

To make your upgrading successful, you need to pick a suitable car stereo for your car. Here I’d like to share a great Seicane Mercedes Benz C Class W203 car stereo with you, which can be perfectly installed in your car without any gap, please click:

http://www.seicane.com/seicane-s127507-2000-2005-mercedes-benz-c-class-w203-c180-c200-c220-c230-android-sat-nav-in-dash-radio-stereo-with-bluetooth-dvd-mirror-link-obd2-3g-wifi-cpu-hd-1024-600-multi-touch-screen-s127507

With a large 7 inch 1024*600 touch screen, this Mercedes Benz C Class W203 car stereo is ideal for you to replace your factory radio for higher configurations. You can get to the desired destination punctually and safely with the help of the built-in GPS navigation system and Bluetooth.

The functions of your steering wheel control will remain after installing this unit. You can also relax yourself via USB wired connection and inserting an SD card to have more entertainment selections. Let this wonderful Mercedes Benz C Class W203 car stereo be your perfect road companion from now on!

18Jan 2016

How to replace a 2004-2012 Mercedes Benz A Class W169 radio with Bluetooth WIFI GPS DVD player

eric ⋅ Leave a Comment

The following shows an image of a 2004-2012 Mercedes Benz A Class W169 radio from Seicane after installation. If you are a car owner of 2004-2012 Mercedes Benz A Class W169 and have a similar dashboard, you can take this car stereo and install it in your car.

Upgrading your factory radio with a new car stereo not only let you keep up with fashion , but also takes your driving experience up a notch. You will be greatly satisfied with both the convenience and enjoyment a new car stereo brings to you. If you know how to install a new car stereo, the upgrading will become easier for you. The below is a step-by-step installation guide of a 2004-2012 Mercedes Benz A Class W169 radio, you can take it as a reference to help with your installation.

Precautions:

Please disconnect the power before the installation.
Please prepare unlock tools r before the removal and the installation.
Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

2004-2012 Mercedes Benz A Class W169 radio installation guide

Detach the outer frame of the original CD player.
2004-2012 Mercedes Benz A Class W169 radio installation step 1

Use a screw driver to remove the screws marked with red circles.
2004-2012 Mercedes Benz A Class W169 radio installation step 2
Remove the screw on the lower right.
2004-2012 Mercedes Benz A Class W169 radio installation step 3
Remove the screw on the lower left.
2004-2012 Mercedes Benz A Class W169 radio installation step 4
Remove the screw on the upper left.
2004-2012 Mercedes Benz A Class W169 radio installation step 5

Remove the screw on the upper right.
2004-2012 Mercedes Benz A Class W169 radio installation step 6
Use a screw driver to remove the screws marked with red circles.
2004-2012 Mercedes Benz A Class W169 radio installation step 7
Remove the original CD player.
2004-2012 Mercedes Benz A Class W169 radio installation step 8
Insert the plug of the car into the socket of unit.
2004-2012 Mercedes Benz A Class W169 radio installation step 9

Remarks:
Plug in the radio antenna.
Plug in the GPS antenna.
Install the new Seicane radio into the dashboard.
Fasten the new Seicane radio with 4 screws and install the frame back.
Turn on the new Seicane radio to have a comprehensive check.

Wish the above installation guide can be helpful for you. If have any questions, it’s suggested you seek help from your dealer or a professional technician. If you are not confident enough to install this radio on your own, you can go to a car stereo upgrading center to have it installed by a technician.

Before the installation, you need to make sure you have a correct car stereo which can perfectly fit your car. If you don’t have one, I’d like to recommend this great Seicane Mercedes Benz A Class W169 radio to you.

http://www.seicane.com/seicane-s127682-7-inch-2004-2012-mercedes-benz-a-class-w169-a150-a160-a170-android-autoradio-navigation-car-dvd-head-unit-with-bluetooth-3g-wifi-mirror-link-obd2-hd-1024-600-multi-touch-screen-flash

Equipped with a powerful 1.6 GHz Cortex A9 Quad-core CPU, this Mercedes Benz A Class W169 radio can process the complicated database and the multiple graphic maps in a faster way than ever. The built-in Bluetooth which enables to pair with your Bluetooth cell phone keeps you a safe and delightful driving. Under the guidance of the 3D GPS system, you can go anywhere with no difficulty in finding a shortest cut with this fantastic Mercedes Benz A Class W169 radio!

16Jan 2016

An easy upgrading guide of a 2004-2011 VW Volkswagen Sagita head unit with Bluetooth wifi DVD player GPS navigation

eric ⋅ Leave a Comment

When the idea comes up to your mind that buying a new VW Volkswagen Sagita head unit to replace your factory radio for advanced configurations as well as a brand new driving experience, you may think about the question of its installation. Some car owners may think one needs much expertise to install a new car head unit. In fact, that’s not the case. With the correct installation guide and related installation experience, one can easily finish the installation by themselves. If you are going to install your own new head unit by yourself, the following VW Volkswagen Sagita head unit installation guide can be helpful for you.

Precautions:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure security.
A lever and a screwdriver need to be prepared before the installation.

Please refer to the below step-by-step removal and installation instructions for 2004-2011 VW Volkswagen Sagita head unit as a reference:

Step1: Remove the trim panel.

Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your one hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.

2004-2011 VW Volkswagen Sagita head unit installation step 1

Step2: Remove the four screws on the radio.

Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new head unit.

2004-2011 VW Volkswagen Sagita head unit installation step 2

Step3: Take the factory radio out of the dash.

After the four screws are unscrewed, you can easily pull the factory out of the dash.

2004-2011 VW Volkswagen Sagita head unit installation step 3

Step4: Disconnect the wiring harness.

Before you put the factory radio aside, please disconnect the wiring harness at the back of the factory radio.

2004-2011 VW Volkswagen Sagita head unit installation step 4

Step 5: Connect the new Seicane head unit to the original wiring harness as the user manual or the wiring diagram shows.

Step 6: Turn on the new Seicane unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

Step 7: Put the new Seicane unit into the dash and install the four screws.

Step 8: Install the trim panel into its original place.

The installation of this unit is quite easy. However, you need to make clear of every step before the removal and installation. If you think it too difficult to understand, you can ask for a technician to help you with the installation, which may cost you some fee though, it’s good to ensure you can have a successful upgrading.

To make sure the new head unit can be perfectly installed in your car and can work well with your car, you need to buy a suitable VW Volkswagen Sagita head unit. You can browse the following link which is an amazing head unit for e VW Volkswagen Sagita from Seicane.

http://www.seicane.com/seicane-s128405-8-inch-android-4-4-4-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth-quad-core-cpu-16g-flash

With both hardware and software upgraded, this double din 2004-2011 VW Volkswagen Sagita head unit is an ideal car stereo to replace your factory radio. It mainly features GPS navigation system, DVD player, Bluetooth function, iPod function, USB port, SD card slots, giving you both convenience and exhilaration when you are driving.

Reach your destination on time with the turn-by-turn direction and voice prompts. The Bluetooth technology can support pairing your Bluetooth-enabled cell phone with this unit, so that you can stream music and stay focused on the road ahead and keep your hands on the steering wheel control to have a safe and pleasant driving.

Wish you’ll have a good time with this 2004-2011 VW Volkswagen Sagita head unit! Good luck to you!

1 2 Next »

Monthly Archives: January 2016

How to upgrade a 2007-2010 Ford Expedition car stereo with Bluetooth DVD player touch screen GPS navigation

An easy installation guide for a 2006-2011 Honda CR-V head unit with Bluetooth Mirror Link OBD2 GPS DVD player

A step-by-step installation guide for a 2006-2011 Honda Civic car stereo with Quad-core CPU 3G WiFi DVD GPS

A detailed installation instruction for a 2007-2013 Toyota Land Cruiser 200 radio with Mirror Link OBD2 DVD player GPS navigation

9 easy steps to upgrade a 2012 2013 2014 VW Volkswagen Passat CC head unit with a Quad-core CPU 16G Flash DVD GPS

An easy installation guide for a 1998-2005 Mercedes Benz S Class W220 head unit with DVD player GPS 16G Flash 3G WiFi

How to replace a 2004 2005 2006 Mercedes Benz Viano Vito radio with Bluetooth GPS navigation DVD player touch screen

Detailed installation instructions of a 2000-2005 Mercedes Benz C Class W203 car stereo with Bluetooth DVD GPS navigation WIFI

How to replace a 2004-2012 Mercedes Benz A Class W169 radio with Bluetooth WIFI GPS DVD player

An easy upgrading guide of a 2004-2011 VW Volkswagen Sagita head unit with Bluetooth wifi DVD player GPS navigation

Post Navigation

Recent Posts

Views

Recent Comments

Archives

Subscribe

Categories

Meta