2016 Februarycar dvd blog

29Feb 2016

How to upgrade a 2014 Toyota Prado car stereo with Quad-core CPU CD DVD Player Bluetooth

If you are an owner of 2014 Toyota Prado and are going to upgrade your factory radio with a new aftermarket car stereo. Some of you may want to install it on your own. Maybe some of you have tried and failed. Here I’d like to share the correct installation instructions about a 2014 Toyota Prado car stereo with you. Please look at the below picture which is a Seicane 2014 Toyota Prado car stereo after installation. If you have the same dashboard, you can refer to the below installation guide.

2014 Toyota Prado car stereo after installation

Tips about the installation:

Please disconnect the power before the installation.
Please prepare a lever and a screwdriver before the removal and the installation.
Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

2014 Toyota Prado car stereo installation guide

1·Pull out the speed control with medium force by your hands.

2014 Toyota Prado car stereo installation step 1

2·Unplug the harness behind the speed control, and set it aside.

2014 Toyota Prado car stereo installation step 2

3·Unscrew four 10mm bolts holding the radio in place.

2014 Toyota Prado car stereo installation step 3

4·When the screws are out, pull the radio out of the dash.

2014 Toyota Prado car stereo installation step 4

5·Disconnecting the harnesses behind the factory radio.

2014 Toyota Prado car stereo installation step 5

6·Make antennas and cables of the Seicane stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.

7·Connect the new Seicane stereo to your Toyota PRADO, you should check your connections, the new unit’s position, and you’d better have a tidy for the cables.

8·Check whether the unit is working without problem.

9·When the radio is working properly, push the radio into place, firm four removed bolts that are put aside, then make panel back on your new Seicane stereo.

Wish the above installation guide can be helpful for you. If you have any questions, you can ask your dealer or a professional for help. If you think it hard to understand all the steps, you’d better go to a car stereo upgrade center to install it or ask a professional technician to help.

Besides, it’s important for you to confirm you have a right stereo for your car. Or a wrong stereo can’t be compatible with your car. If you are unsure about this, you can refer to the following link which is about a Toyota Prado car stereo from Seicane, please click:

http://www.seicane.com/seicane-s128001-8-inch-pure-android-sat-nav-car-multimedia-system-for-2014-toyota-prado-with-cd-dvd-player-bluetooth-am-fm-radio-mirror-link-obd2-3g-wifi-steering-wheel-control

Equipped with an Android 4.4.4 operating system and a RK3188 1.6 GHz Cortex A9 Quad-core CPU, this Toyota Prado car stereo of advanced configuration is easy to operate with a large 8 inch HD 1024*600 multi-touch screen. The Bluetooth technology to sync your mobile phone is included in it, so that you can enjoy hands-free calls and streaming audio. The USB wired connection and iPod availability greatly increase ways to relax and entertain.

Just get to your destination with this excellent Toyota Prado car stereo and have a great time with it!

26Feb 2016

A detailed installation guide for a 2006-2011 VW Volkswagen Cupra car stereo with Bluetooth Quad-core CPU 16G Flash

eric ⋅ Leave a Comment

With the improvement of technology, you can easily find what you need in your car in new aftermarket car stereo. If your factory radio is far enough to meet your requirements in your car, then it’s wise of you to replace it with a new car stereo. The picture below is an advanced 2006-2011 VW Volkswagen Cupra car stereo from Seicane, if you have the same dashboard, you can take the following detailed installation guide as a reference.

2006-2011 VW Volkswagen Cupra car stereo after installation

Precautions:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.

2006-2011 VW Volkswagen Cupra car stereo installation guide

Step1: Remove the trim panel.

Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.

2006-2011 VW Volkswagen Cupra car stereo installation step 1

Step2: Remove the four screws on the radio.

Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new radio.

2006-2011 VW Volkswagen Cupra car stereo installation step 2

Step3: Take the factory radio out of the dash.

After the four screws are unscrewed, you can easily pull the factory radio out of the dash.

2006-2011 VW Volkswagen Cupra car stereo installation step 3

Step4: Disconnect the wiring harness.

Before you put the factory radio aside, please disconnect the wiring harness at the back of it.

2006-2011 VW Volkswagen Cupra car stereo installation step 4

Step 5: Connect the new Seicane car stereo to the original wiring harness as the user manual or the wiring diagram shows.

Step 6: Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

Step 7: Put the new Seicane car stereo into the dash and install four screws.

Step 8: Install the trim panel into its original place.

Wish the above installation guide can be helpful for you. If you find the factory radio is different from yours, don’t worry, it’s normal that cars in different manufacture years come with different dashboard. But it won’t have much impact on the installation which is similar on the whole. If you have any questions, you can turn to your dealer or a professional for help.

Because different car stereos are specific for different cars, you need to find a suitable car stereo for your car so that it can work well and be installed perfectly. If you don’t find one, you can refer to the following link which is a modern VW Volkswagen Cupra car stereo from Seicane.

http://www.seicane.com/seicane-s128405-8-inch-android-4-4-4-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth-quad-core-cpu-16g-flash

This VW Volkswagen Cupra car stereo comes with a built-in GPS system, you won’t worry about getting lost in an unfamiliar place any more. And you can keep safe and relaxed all the way if you wirelessly link your Bluetooth-enabled cell phone to this unit to have hand-free conversations with your callers and stream music from the playlist of your phone.

What’s more, other popular audio and video formats such as DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG can work with this unit to let you have more options to entertain both yourself and your passengers.

Just install this remarkable VW Volkswagen Cupra car stereo in your car and enjoy the amazing convenience and great enjoyment it brings to you.

25Feb 2016

How to easily replace a 2005-2008 Chevy Chevrolet SPARK radio with Quad-core CPU 3G WiFi DVD AM FM Radio

eric ⋅ Leave a Comment

Is it possible for me to install a new car radio in my car on my own? Some car owners who want to replace their factory radio may have that question. Actually, the answer is yes. It’s quite simple to install a car radio nowadays based on that most car radios come with special wiring harness to make the installation easier. Look at the picture below, which is a great 2005-2008 Chevy Chevrolet SPARK radio from Seicane. If you have the same dashboard, you can take the following 2005-2008 Chevy Chevrolet SPARK radio installation guide as a reference.

2005-2008 Chevy Chevrolet SPARK radio after installation

Here are some tips for you before the installation:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.

2005-2008 Chevy Chevrolet SPARK radio installation guide

Remove the trim panel. There are several parts of the trim panel. You should remove them one by one. First remove the trim panel which is around the screen. Then, remove the trim panel which is next to the CD player. Remove the screws on the trim panel before you pry it from the dashboard. And put them away and keep every part well so that you can install them back to the original place perfectly.
2005-2008 Chevy Chevrolet SPARK radio installation step 1

Unscrew the screws on the units and put them away.
2005-2008 Chevy Chevrolet SPARK radio installation step 2

Take the original radio out of the dash.
2005-2008 Chevy Chevrolet SPARK radio installation step 3

Disconnect the connectors at the back of the original radio.
2005-2008 Chevy Chevrolet SPARK radio installation step 4

Install the new Seicane radio. The installations of different units are different. You should refer to the installation instruction from the dealer and connect the new Seicane radio to the original wiring harness. If it needs a wiring harness adaptor, connect the adaptor to the original wiring harness first, then, connect the adaptor to the new Seicane radio.
2005-2008 Chevy Chevrolet SPARK radio installation step 5

Turn on the new Seicane radio and test it. Connect the negative cable on the battery and turn on the new Seicane radio to test all the functions in it. If everything’s good, fix the screen by putting it hard to the dashboard and fix the DVD player with screws.
2005-2008 Chevy Chevrolet SPARK radio installation step 6

Install the trim panel. Install the trim panel which was next to the CD player before back to its original place.

Wish the above installation guide is helpful for you. If you have any questions, you can ask your dealer or a professional for help. If you find it too hard for you to install it on your own, it’ s strongly suggested you have it installed by a professional or directly go to a car stereo upgrade center to install it.

Before the installation, you need to make sure you have a right car radio which can be installed without any gap in your car. If you don’t have a suitable car radio, I’ d like to recommend an ideal 2005-2008 Chevy Chevrolet SPARK radio from Seicane to you, please click:

http://www.seicane.com/seicane-s127011-16g-pure-android-4-4-4-sat-nav-head-unit-for-2006-2011-chevy-chevrolet-epica-with-quad-core-cpu-3g-wifi-dvd-am-fm-radio-bluetooth-mirror-link-obd2

This Chevy Chevrolet SPARK radio comes with an advanced Android 4.4.4 version and a RK3188 1.6 GHz Cortex A9 Quad-core CPU, you can have a faster and easier operation on its large 7 inch touch screen with 1024*600 pixel resolution. Reach your destination on time under the guidance of the turn-by-turn direction and voice prompts.

As long as you have a mobile phone with Bluetooth, you are able to pair it with this unit to make and receive calls without taking your hands off the steering wheel control and stream music at the same time. In this way, a safe and pleasant driving is always with you and your passengers.

Take your driving experience up a notch with this Chevy Chevrolet SPARK radio right now and have a wonderful time with it on all trips!

25Feb 2016

How to upgrade a 2006-2013 Mercedes Benz R Class W251 radio with 16G Flash CD DVD Player 3G WiFi Bluetooth

eric ⋅ Leave a Comment

There are always many ways to make life more comfortable and convenient. If you have a 2006-2013 Mercedes Benz R Class W251., it’s wise of you to upgrade your factory radio which is with less functions to a multifunctional car radio which can provide a great deal of convenience and enjoyment for you. Please take a look at the image below, it’s a popular 2006-2013 Mercedes Benz R Class W251 radio from Seicane after installation. If you find it the same as your dashboard, you can refer to the following 2006-2013 Mercedes Benz R Class W251 radio installation instructions.

2006-2013 Mercedes Benz R Class W251 radio after installation

Before installing the new radio, there are some tips for you:

Please disconnect the power before the installation.
Please prepare a lever and a screwdriver before the removal and the installation.
Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

The below is the step-by-step instruction on how to install a 2006-2013 Mercedes Benz R Class W251 radio:

Pry out the air conditioner panel along gap with a lever.
2006-2013 Mercedes Benz R Class W251 radio installation step 1
Remove the air conditioner panel.
2006-2013 Mercedes Benz R Class W251 radio installation step 2
Remove two screws holding the stereo in the dashboard frame with a screwdriver.
2006-2013 Mercedes Benz R Class W251 radio installation step 3
Pull the buckles down.
2006-2013 Mercedes Benz R Class W251 radio installation step 4

Carefully take the original CD player out of the dashboard.
2006-2013 Mercedes Benz R Class W251 radio installation step 5
Disconnect the ISO plug of the car in the socket of the DVD player.
2006-2013 Mercedes Benz R Class W251 radio installation step 6
Connect the cables of the new Seicane radio as the user manual shows.
Connect the ISO plug.
Put the new Seicane radio back into the dash.
Put the buckles back into its original place.
Install two screws and the air conditioner panel.
Turn on the new Seicane radio and have a comprehensive test if everything works well.

You may have any some questions during the whole process of the installation, please ask your dealer or a professional for help. Make clear every step before the installation. If you find it hard to understand all the steps, it’ s suggested you go to a car stereo upgrade center or ask a professional for help.

What’s more, it’s crucial for you to make confirmation that your new radio can fit your car. If you are unsure about that, you can refer to the following link which is about a hot-selling Mercedes Benz R Class W251 radio from Seicane, please click:

http://www.seicane.com/seicane-s127510-android-radio-gps-audio-system-for-2006-2013-mercedes-benz-r-class-w251-r280-r300-r320-r350-r63-with-cd-dvd-player-3g-wifi-bluetooth-music-mirror-link-obd2

This Mercedes Benz R Class W251 radio comes with a bright 7 inch multi-touch screen with HD 1024*600 pixel resolution provides a more intuitive interface and simplifies the operation. Featured a built-in GPS system, this radio can guide you to your destination with turn-by-turn direction and voice prompts. The Bluetooth technology which allows you to get access to hands-free calls and streaming music is also included in it to keep you safe and cheerful on all trips.

Keep safe and pleasant all the way with this remarkable Mercedes Benz R Class W251 radio in your car. It can be your great road companion. Good luck to you!

24Feb 2016

How to install a 2006-2011 Honda Civic head unit with 3G WiFi Bluetooth Music HD 1080P Video GPS navigation

eric ⋅ Leave a Comment

As the technology is constantly improving, more and more amazing head units are built for specific cars. If you are going to upgrade your factory radio, it’s wise of you to replace it with a new aftermarket unit for greater performance and better experience. The picture below is a multifunctional 2006-2011 Honda Civic head unit from Seicane. It looks appealing, doesn’t it? If you have the same dashboard as it, you can read this article carefully to get the assistance for the installation.

2006-2011 Honda Civic head unit after installation

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

2006-2011 Honda Civic head unit installation guide

The original CD player.
2006-2011 Honda Civic head unit installation step 1

2.Pry the cover of the slot below the CD player with a lever and remove it.

2006-2011 Honda Civic head unit installation step 2

3.Remove two screws inside the slot with a ninety-degree screwdriver.

2006-2011 Honda Civic head unit installation step 3

4.Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel.

2006-2011 Honda Civic head unit installation step 4

Remove one screw in the dash.
2006-2011 Honda Civic head unit installation step 5

6.Remove the vent panel.

2006-2011 Honda Civic head unit installation step 6

7.Unplug the connectors beneath the panel.

2006-2011 Honda Civic head unit installation step 7

8.Pry the edges along the panel of the original radio, then remove it, after that, take the original CD player out of the dash.

2006-2011 Honda Civic head unit installation step 8

Unplug the connectors at the back of the original radio.
2006-2011 Honda Civic head unit installation step 9-1

2006-2011 Honda Civic head unit installation step 9-2

Disconnect the antenna and the other connector on the other side of the original radio.
2006-2011 Honda Civic head unit installation step 10-1

2006-2011 Honda Civic head unit installation step 10-2

11.Make antennas and cables of the new Seicane head unit connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.

12.Put the new Seicane head unit into the dash.

13.Turn on the new Seicane head unit and check whether the unit is working properly.

14.Install the panel and screws, and put everything into their original place.

Wish the above installation guide can be helpful for you. If you find it difficult to understand all the steps, you’d better do it under the guidance of a professional. Before the installation, it’s crucial for you to check if your new head unit can fit your car. If you are unsure about it, you can refer to the following Seicane 2006-2011 Honda Civic head unit as a reference.

Besides the 3D GPS navigation function to offer you the precise direction to your destination, this Android 4.4.4 2006-2011 Honda Civic head unit can meet all your needs on entertainment. As a great DVD player, it allows you to play any DVD from any country in the world. As a standard radio tuner, you can listen to your favorite station with 18 FM channels and 12 AM channels preset for you. What’s more, a safe and pleasant journey is available for you if you simply sync your mobile phone with this unit due to the Bluetooth technology built in it.

Wish you have a wonderful time with this amazing 2006-2011 Honda Civic head unit and good luck to you!

24Feb 2016

Install a new 2009-2013 Seat Ibiza radio with simple 8 steps

eric ⋅ Leave a Comment

With the improvement of life, it’s easier for people to get a beloved car. And many car owners choose to replace a modern aftermarket because they want a more entertaining and convenient life in their car. If you know how to install a new car radio in your car, things may become easier for you. Please look at the following picture, it’s a Seicane 2009-2013 Seat Ibiza radio after installation, if you have the same or similar dashboard, you can follow the following installation instruction.

2009-2013 Seat Ibiza radio after insatllation

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

2009-2013 Seat Ibiza radio installation guide

Pry along the front panel with a lever, loosen it with your hands at the same time, after that, remove the panel with your hands.
2009-2013 Seat Ibiza radio installation step 1-1

2009-2013 Seat Ibiza radio installation step 1-2

Remove four screws holding the radio in the dashboard with a screw driver.
2009-2013 Seat Ibiza radio installation step 2

Take the factory radio out of the dashboard.
2009-2013 Seat Ibiza radio installation step 3

Disconnect the connectors at the back of the factory radio.
2009-2013 Seat Ibiza radio installation step 4

Make antennas and cables of the new Seicane car radio connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
Put the new Seicane car radio into the dash.
Turn on the new Seicane car radio and check whether the radio is working properly.
Firm all screws and the panels into their original place.

Wish you can get help from the above installation guide. The removal and the installation are not quite difficult, but if you have difficulty in understanding all steps, you’d better ask a professional for help, which can make sure your upgrade can be successful.

Besides, you also need to make sure you pick a right car radio for your car. If you are still looking one for your car, I’d like to share a great 2009-2013 Seat Ibiza radio with a lot of practical features from Seicane with you, please click:

http://www.seicane.com/seicane-s127010-quad-core-2009-2013-seat-ibiza-android-4-4-4-in-dash-dvd-navigation-system-with-radio-tuner-bluetooth-music-mirror-link-obd2-3g-wifi-16g-flash-backup-camera-steering-wheel-control-mp3

This wonderful Seat Ibiza radio comes with a powerful DVD disk player, you can play any DVD disk from any country around the world and the FM/AM radio tuner enables you to listen to your favorite station all the way. Hands-free calls for safety and streaming music for relaxation are all accessible to you due to the technology. Besides, you won’t have any trouble in finding the best way to your destination with the 3D high precision GPS navigation.

Just enjoy your wonderful journey with this amazing Seat Ibiza radio on all your trips! Good luck to you!

23Feb 2016

How to install a Universal head unit with GPS navigation Multimedia System with Quad-core CPU 3G WiFi

eric ⋅ Leave a Comment

When you drive for a long time, you may easily find it’s easy to get bored or tired in your car. At that case, it’s wise of you to choose a multifunctional head unit which can support a great deal of multimedia playback to relax both yourself and your passengers. Please take a careful look at the picture below, it looks appealing, doesn’t it? This is a Universal head unit from Seicane after installation, if you have the same dashboard, you can refer to the following detailed installation instructions.

Universal head unit after installation

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

Universal head unit installation guide

1·Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Universal head unit installation step 1

2·Remove screws that fixed the radio on the dashboard.

Universal head unit installation step 2

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Universal head unit installation step 3

4·Unplug the connectors at the back of the factory radio.

Universal head unit installation step 4

Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.
Universal head unit installation step 5

Put the new Seicane head unit into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7· If everything is OK, firm screws into their original place.

Universal head unit installation step 7

8·Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new radio.

Universal head unit installation step 8

With the above installation guide can be helpful for you. If you have any questions during the whole process, you can seek help from your dealer or a professional. If you find it hard to understand the whole procedure, it’s strongly suggested that you have it installed in a car stereo upgrade center or by a professional.

In addition, you need to make sure you have a fitting head unit for your car. If you have no idea which head unit can fit your car, you can refer to the following Seicane Universal head unit, please click:

http://www.seicane.com/seicane-s127006-16g-android-4-4-4-universal-autoradio-navigation-car-multimedia-system-with-quad-core-cpu-3g-wifi-cd-dvd-player-bluetooth-music-mirror-link-obd2-steering-wheel-control-hd-1080p-video

This Universal head unit comes with not only a 3D GPS navigation system of high precision to provide you with the most accurate guidance to your destination but also a great deal of entertainment features to make your journey full of fun and enjoyment. Thanks to the Bluetooth technology, you can also keep safe by making and answering phone calls on the steering wheel control as long as you have a mobile phone with Bluetooth.

Take this wonderful Universal head unit as your perfect road companion from now on, an exciting driving experience will always be with you! Good luck to you!

03Feb 2016

How to upgrade a 2014 Great Wall Hover H6 car stereo with 16G Flash CD DVD Player 3G WiFi

eric ⋅ Leave a Comment

First shows you an image of a 2014 Great Wall Hover H6 car stereo after installation from Seicane.

2014 Great Wall Hover H6 car stereo after installation

When you are going to replace your factory radio, you may worry about the installation is too complicated and dare not install it easily. As a matter of fact, to install a car stereo is not a job specific to a professional. With some related installation experience and a correct installation guide, you can even finish the installation at your home. If you are a car owner of 2014 Great Wall Hover H6 and find your dashboard is the same as that above, then you can refer to the following detailed Great Wall Hover H6 car stereo installation guide to help with your installation.

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

2014 Great Wall Hover H6 car stereo installation guide

1·Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

2014 Great Wall Hover H6 car stereo installation step 1

2·Remove screws that fixed the radio on the dashboard.

2014 Great Wall Hover H6 car stereo installation step 2

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

2014 Great Wall Hover H6 car stereo installation step 3

4·Unplug the connectors at the back of the factory radio.

2014 Great Wall Hover H6 car stereo installation step 4

Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.
2014 Great Wall Hover H6 car stereo installation step 5

6.Put the new Seicane car stereo into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7· If everything is OK, firm screws into their original place.

2014 Great Wall Hover H6 car stereo installation step 7

8·Firm the panel on the new Seicane car stereo. Finally the new Seicane car stereo is installed and a comprehensive test should be conducted on the new radio.

2014 Great Wall Hover H6 car stereo installation step 8

The above are all the installation steps for a Great Wall Hover H6 car stereo. If you want more information or have any questions, you can ask your dealer or a professional for help. If you find it too hard to understand all the steps, you can go to a car upgrade center to install it. Wish it can be helpful for you.

Before you begin your installation, it’s necessary for you to make sure your new car stereo can work well with your car, so that you can have a successful upgrading. If you are unsure about it, you can refer to the following link which is a Great Wall Hover H6 car stereo from Seicane, please click:

http://www.seicane.com/seicane-s127702-8-inch-100-android-4-4-4-radio-bluetooth-multimedia-navigation-system-for-2014-great-wall-hover-h6-with-16g-flash-cd-dvd-player-3g-wifi-mirror-link-obd2-steering-wheel-control-auto-a-v-quad-core-cpu

Due to the upgraded Android 4.4.4 and the Quad-core CPU, you can enjoy a smoother and faster performance. By wirelessly connecting your compatible cell phone to this unit, you are able to stay focused on the road ahead and keep your hands on the steering wheel control to make and receive calls to keep safe. In this way, you can also listen to your favorite music of your cell phone or other devices. Find the way with the built-in GPS navigation system, you can go anywhere without getting lost any more.

Wish you can get some help from this article and enjoy your new Great Wall Hover H6 car stereo in your car.

02Feb 2016

A step-by-step installation guide of a 2003-2010 Renault Megane head unit with Bluetooth Mirror Link OBD2

eric ⋅ Leave a Comment

When you get bored and tired during a long trip, it’s a great idea to play some exciting music or your favorite songs to relax yourself. In that case, a modern head unit with a lot of features will must greatly satisfy you. Please look at the picture below which is a fantastic 2003-2010 Renault Megane head unit from Seicane after installation. If you have a same or similar dashboard, you can install it in your car. The installation of it is quite easy. If you want to install it on your own, the following 2003-2010 Renault Megane head unit installation guide is great for you as a reference.

2003-2010 Renault Megane head unit after installation

Precautions:

Please set the parking brake and remove the negative cable from your car battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.

2003-2010 Renault Megane head unit installation guide

1.Unscrew any screws that are securing the trim in place. Be careful to remove all screws before trying to pry off the trim or you may break it.

2003-2010 Renault Megane head unit installation step 1

2.Remove the trim with specific pry tools.

2003-2010 Renault Megane head unit installation step 2

3.Pull out any necessary components. Disconnect components that are wired to the car. Take a picture of how each is wired for later reference.

2003-2010 Renault Megane head unit installation step 3

4.Loosen the original radio and take it out of the dashboard.

2003-2010 Renault Megane head unit installation step 4

5.Disconnect the connectors at the back of the original radio.

2003-2010 Renault Megane head unit installation step 5

Match up the wires. Match the wires of the car’s harnesses to the new Seicane unit’s harnesses. Each harness connector is unique, so it should be easy to figure out which ones fit together.
2003-2010 Renault Megane head unit installation step 6

Assemble the mounting kit. If your new Seicane unit comes with a separate mounting kit, assemble it according to the unit’s instructions (it will often mean fitting a metal housing sleeve into the mounting frame).

Push down on the tabs located around the metal sleeve with a screwdriver to secure the metal sleeve in place.

2003-2010 Renault Megane head unit installation step 7

Connect the power source. Typically, if you have a wiring harness, this connection will be made when you connect the new unit harnesses to the harnesses in the car.

If you aren’t using a wiring harnesses, you’ll need to manually connect the power. Determine whether your car has a switched power source (typically a red wire) or a constant power source (typically a yellow wire). Some vehicles even have both types of power sources.

2003-2010 Renault Megane head unit installation step 8

9.Ground the new Seicane unit. If you’re using wiring harnesses, this connection will be made when you connect the harness pieces.

If you aren’t using a wiring harness, you’ll need to locate the bolt, wire, or screw that connects with the car’s bare metal chassis. Loosen the bolt, wire, or screw and slip the unit’s ground wire (usually black) underneath, then tighten.

2003-2010 Renault Megane head unit installation step 9

10.Connect the remaining wires. Plug in the antenna cable and connect the unit’s wiring adapter to the car’s wire harness. Connect the output converter if one is needed to make the new unit compatible with the car’s audio system.

2003-2010 Renault Megane head unit installation step 10

11.Test the stereo. Turn the power on and test the AM, FM, and CD components. Test the fade and balance settings to be sure the speakers are working properly. Turn the power back off.

2003-2010 Renault Megane head unit installation step 11

Put the new Seicane unit into the dashboard. And install all the screws and trim panels into their original place.

Wish the above guide can be helpful for you. If you find it too complicated to understand, it’s suggested you go to a car stereo upgrade center to install it or ask a professional technician to help with it.

If you don’t have a head unit, I’d like to recommend a modern 2003-2010 Renault Megane head unit from Seicane to you, you are welcome to click:

http://www.seicane.com/seicane-s127091-quad-core-android-4-4-4-autoradio-gps-stereo-for-2003-2010-renault-megane-with-bluetooth-mirror-link-obd2-3g-wifi-cd-dvd-player-16g-flash-steering-wheel-control-hd-1080p-video

The powerful capabilities of this head unit will meet all you needs in a car stereo, including GPS navigation, Bluetooth, DVD, CD, FM/AM radio, RDS, iPod, USB, SD, WIFI, etc. What’s more, the large 7 inch multi-touch screen with HD 1024*600 pixel resolution is excellent to operate everything and watch all kinds of videos and movies. Go with this Renault Megane head unit and enjoy your brand new driving experience from now on!

01Feb 2016

A step-by-step installation guide of a 2004-2010 Opel Astra radio with 3G WiFi Bluetooth GPS navigation

eric ⋅ Leave a Comment

This is a 2004-2010 Opel Astra radio after installation, an amazing GPS navigation system DVD player with the latest software and firmware from Seicane.

2004-2010 Opel Astra radio after installation

If you are a car driver and often spend a lot of time on driving, you must find you will easily get bored and tired during a long trip. At that time, a great car stereo is your best road companion for you to relax yourself immediately. If you want to have a comfortable driving experience, you can upgrade your factory radio with a new aftermarket one which can bring a lot of different features for you. If you own a 2004-2010 Opel Astra, you can follow the Opel Astra radio guide below for installation details.

Here are some tips for you before the installation:

1.Please disconnect the power before the installation.

A lever and a screwdriver need to be prepared before the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible, so each related part of the unit can be fixed securely.

1.Insert the removal tools into the small holes in both sides of the original radio.

2004-2010 Opel Astra radio installation step 1

2.Take the original radio out of the dash by pulling the removal tools a little and pulling it out with your hands.

2004-2010 Opel Astra radio installation step 2

3.Disconnect the connector at the back of the original radio.

2004-2010 Opel Astra radio installation step 3

4.Take out the screws and tidy some wires to inner place.

2004-2010 Opel Astra radio installation step 4

5.Pry the trim panel with a lever, release and remove it.

2004-2010 Opel Astra radio installation step 5

6.Plug antennas as the pictures show below.

2004-2010 Opel Astra radio installation step 6-1

2004-2010 Opel Astra radio installation step 6-2

7.Use a screwdriver to pull out the side panel, then take out lower side panel in front of file.

2004-2010 Opel Astra radio installation step 7-1

2004-2010 Opel Astra radio installation step 7-2

8.Make red long line inserted down through the side panel and up through removed panel in front of file, then firm the side panel.

2004-2010 Opel Astra radio installation step 8

9.Sort cables and interfaces as the picture shows below, tidy all of them to the right space.

2004-2010 Opel Astra radio installation step 9

10.Connect the red cable to the right position.

2004-2010 Opel Astra radio installation step 10

11.Connect the red cable with the removed small panel in front of file and reinstall it.

2004-2010 Opel Astra radio installation step 11

12.Make connection for cables and interfaces between the new Seicane unit and the car.

2004-2010 Opel Astra radio installation step 12-1

2004-2010 Opel Astra radio installation step 12-2

13.Then connect the two outside cables to the back of the new Seicane unit, then put new radio into the dash and install removed panel into its original place.

It’s normal if you find there are some differences on the dashboard between your car and the pictures above, but the installation is quite similar, and it won’t have much impact on the whole procedure. During the whole upgrading, if you encounter any question, it’s suggested you ask your dealer or a professional for help.

If you don’t have a suitable radio for your car, I’d like to recommend a wonderful 2004-2010 Opel Astra radio from Seicane to you. It is equipped with an advanced Android 4.4.4 operation system and a remarkable RK3188 1.6 GHz Cortex A9 Quad-core processor, which can greatly enhance the performance. For more detailed information, you are welcome to click:

http://www.seicane.com/seicane-s127681-quad-core-android-4-4-4-autoradio-gps-car-dvd-player-for-2004-2010-opel-astra-with-3g-wifi-bluetooth-mirror-link-obd2-16g-flash-hd-1024-600-multi-touch-capacitive-screen-mp3

With this precise GPS navigation system, you won’t have any trouble in finding the correct direction to your destination with the help of the GPS system with accurate guidance. The Bluetooth technology for hands-free calls and streaming music of your mobile phone is compatible with this unit.

The USB/iPd connection for compatible external devices also offers more options to you to entertain. The function of your steering wheel control will still remain after the head unit is installed.

Wish you like this wonderful Opel Astra radio and have a great time with it! Good luck!

Monthly Archives: February 2016

How to upgrade a 2014 Toyota Prado car stereo with Quad-core CPU CD DVD Player Bluetooth

A detailed installation guide for a 2006-2011 VW Volkswagen Cupra car stereo with Bluetooth Quad-core CPU 16G Flash

How to easily replace a 2005-2008 Chevy Chevrolet SPARK radio with Quad-core CPU 3G WiFi DVD AM FM Radio

How to upgrade a 2006-2013 Mercedes Benz R Class W251 radio with 16G Flash CD DVD Player 3G WiFi Bluetooth

How to install a 2006-2011 Honda Civic head unit with 3G WiFi Bluetooth Music HD 1080P Video GPS navigation

Install a new 2009-2013 Seat Ibiza radio with simple 8 steps

How to install a Universal head unit with GPS navigation Multimedia System with Quad-core CPU 3G WiFi

How to upgrade a 2014 Great Wall Hover H6 car stereo with 16G Flash CD DVD Player 3G WiFi

A step-by-step installation guide of a 2003-2010 Renault Megane head unit with Bluetooth Mirror Link OBD2

A step-by-step installation guide of a 2004-2010 Opel Astra radio with 3G WiFi Bluetooth GPS navigation

Recent Posts

Views

Recent Comments

Archives

Subscribe

Categories

Meta