2016 Maycar dvd blog | car dvd blog

31May 2016

A detailed installation guide to upgrade a 2003-2011 VW Volkswagen Touran car stereo with Bluetooth 3G WIFI TV Tuner DVR USB SD 1080P Video

2003-2011 VW Volkswagen Touran car stereo after installation

Since most aftermarket car stereos are plug and play and will come with all the cables for the installation, therefore, to install a new stereo is no more a problem for car owners who want to enjoy more features by replacing their factory radio with a new one. Here I’d like to share a detailed 2003-2011 VW Volkswagen Touran car stereo installation guide from Seicane with you. If you own a 2003-2011 VW Volkswagen Touran and have the same dashboard as the picture below, you can take it as a reference.

2003-2011 VW Volkswagen Touran car stereo after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003-2011 VW Volkswagen Touran car stereo installation guide

Step 1: Remove the trim panel.

Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your one hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.

Remove the trim panel

Step 2: Remove the four screws on the radio.

Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new head unit.

Remove the four screws on the radio

Step 3: Take the factory radio out of the dash.

After the four screws are unscrewed, you can easily pull the factory out of the dash.

Take the factory radio out of the dash

Step 4: Disconnect the wiring harness.

Before you put the factory radio aside, please disconnect the wiring harness at the back of the factory radio.

Disconnect the wiring harness

Step 5.Check all the accessories for the new Seicane car radio.

Step 6. Connect the harnesses to the back of the new Seicane car radio.

Step 7. Connect the Seicane car radio to your original car radio ‘s plugs.

Step 8: Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

Step 9: Put the new Seicane stereo into the dash and install the four screws.

Step 10: Install the trim panel into its original place.

Can you understand all the steps above for the installation of a 2003-2011 VW Volkswagen Touran car stereo? If not, you can turn to your dealer for help. If you don’t have enough experience to install it on your own, you can ask a professional for help.

Besides, it’s important for you to make sure you have a correct car stereo for your car. If you have no idea about it, you can refer to this 2003-2011 VW Volkswagen Touran car stereo from Seicane. For more details, you are welcome to click:

http://www.seicane.com/aftermarket-radio-gps-navigation-system-for-2008-2011-vw-volkswagen-passat-cc-scirocco-polo-golf-with-dvd-player-bluetooth-3g-wifi-rearview-camera-tv-tuner-dvr-usb-sd-canbus-1080p-video-s127698m

This modern VW Volkswagen Touran car stereo based on the WinCE 6.0 operation system can perfectly fit your 2003-2011 VW Volkswagen. The comprehensive features like 3D GPS navigation function, DVD and CD player, bluetooth technology, FM/AM radio, Ipod, USB and SD card connection are all provided for you to get the greatest convenience and enjoyment in your car.

To enjoy all your amazing trips, this VW Volkswagen Touran car stereo is just your best choice. Good luck to you!

31May 2016

A professional installation guide for a 2007-2013 Buick Enclave car radio with Mirror Link OBD2 3G WiFi 1024*600 Multi-touch Capacitive Screen

eric ⋅ Leave a Comment

The modern car stereo nowadays are usually integrated with a 3D real-time GPS navigation system and a powerful DVD player. To get more convenience and enjoyment in your car, you can easily upgrade your factor radio. Installing a new car radio doesn’t require you much professional knowledge, if you have some related experience and get a detailed installation guide, you can also achieve the installation on your own. Here is a step-by-step 2007-2013 Buick Enclave car radio installation guide from Seicane for your reference.

2007-2013 Buick Enclave car radio after installation

Some tips before the installation:

Please disconnect the power before the installation.
Please prepare a lever and a screwdriver before the removal and the installation.
Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2013 Buick Enclave car radio installation guide

1.Remove the trim panel by prying the edges with a lever.

Remove the trim panel by prying the edges with a lever

2.Remove two screws securing the small panel under the factory radio with a screwdriver.

Remove two screws securing the small panel under the factory radio with a screwdriver

3.Remove the small panel with your hands.

Remove the small panel with your hands

4.Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-1. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-2. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

5.Unscrew four screws holding the factory radio with a screwdriver.

5. Unscrew four screws holding the factory radio with a screwdriver.

6.Take the original radio out of the dashboard with your hands.

6. Take the original radio out of the dashboard with your hands.

7.Disconnect the connectors at the back of the factory radio.

7. Disconnect the connectors at the back of the factory radio.

8.Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car stereo

9.Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car stereo

10.Connect the Seicane car radio to your original car radio ‘s plugs.

11.Put the new Seicane car radio into the dash.

12.Turn on the new Seicane car radio and check whether the radio is working properly.

13.Firm all screws and the panels into their original place.

Under the guidance of the detailed installation instruction, can you install this intelligent 2007-2013 Buick Enclave car radio by yourself? If not, it’s strongly suggested you ask a professional for help. Please make sure you are clear about every step before the installation.

What’s more, you’d better check if you have a correct radio for your car. If you don’t know how to check, you can refer to this popular 2007-2013 Buick Enclave car radio from Seicane, please click:

http://www.seicane.com/oem-2007-2013-gmc-yukon-tahoe-acadia-chevy-chevrolet-tahoe-suburban-buick-enclave-android-4-4-4-radio-removal-with-autoradio-gps-navigation-car-a-v-system-1024-600-multi-touch-capacitive-screen-mirror-link-obd2-3g-wifi-k7012

This top Buick Enclave car radio car stereo comes with a powerful RK3188 1.6 GHz Cortex A9 Quad-core CPU for you to replace your factory radio with better performance. You won’t have any trouble in finding your way to your desired destination under the guidance of the most accurate GPS navigation system. You can get access to more safety and pleasure when you pair with your enabled mobile phone via bluetooth technology for hands-free calls and streaming music.

To make your journey fill with fun and relaxation, this intelligent Buick Enclave car radio is just your best choice. Just take it right now and go!

31May 2016

An easy installation guide for a 2006-2009 Ford Fusion car stereo with 16G Flash 3G WiFi Bluetooth Mirror Link OBD2

eric ⋅ Leave a Comment

To go to a car stereo center, you may easily upgrade your factory radio, but it probably costs you a large amount of money. However, you can also pick up an amazing unit with quite a reasonable price online and have it installed by a professional. Now I’d like to share the step-by-step 2006-2009 Ford Fusion car stereo installation instruction from Seicane with you. If you also have the same dashboard, you can take it as a reference.

2006-2009 Ford Fusion car stereo after installation

Precautions:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.
For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2009 Ford Fusion car stereo installation guide

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Step 10: Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Step 11: Connect the Seicane car stereo to your original car radio ‘s plugs, and put the new Seicane car stereo into the dash.

Step 12: Turn on the new Seicane car stereo and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

Above all, you need to make clear every step before you start to install an intelligent 2006-2009 Ford Fusion car stereo in your car. If you don’t understand any step, you can consult your dealer. By the way, do you have an ideal car stereo for your car? If not, I’d like to recommend an amazing 2006-2009 Ford Fusion car stereo from Seicane to you. It comes with an exquisite user interface for you to upgrade your factory radio. Here’s the link, please click：

http://www.seicane.com/seicane-s127302-quad-core-pure-android-dvd-gps-in-dash-radio-system-for-2005-2009-ford-mustang-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera

This intelligent Ford Fusion car stereo can function as an amazing DVD multimedia player, you can play DVDs from every country in the world. You can also listen to your favorite radio station with 18 FM channels and 12 AM channels preset for you. With the GPS navigation system on all trips, you won’t get lost any more. Thanks to the Bluetooth technology, your journey can be filled with safety and pleasure when you sync with your compatible cell phone to dial and receive hands-free calls and stream music.

Just let this wonderful Ford Fusion car stereo upgrade your driving experience with its powerful capabilities! Good luck to you!

30May 2016

How to replace a 2004-2014 Ford F150 F250 F350 head unit with 16G Flash 3G WiFi Bluetooth Mirror Link OBD2 Rearview Camera Quad-core

eric ⋅ Leave a Comment

Listening to your favorite music while you are navigating to your desired destination with the guidance of the real-time GPS is really amazing, isn’t it? However, not each factory radio can do all these for you at the same time. If you find your factory radio can’t meet your needs, it’s wise of you to replace it with a new aftermarket car radio. And you can find a step-by-step installation guide to help with the installation. Do you have the same dashboard as the picture below? If yes, then you can take this detailed 2004-2014 Ford F150 F250 F350 head unit installation guide from Seicane as a reference to help with the installation.

2004-2014 Ford F150 F250 F350 head unit after installation

Some tips before the installation:

Please disconnect the power before the installation.
Please prepare a lever and a screwdriver before the removal and the installation.
Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004-2014 Ford F150 F250 F350 head unit installation guide

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car stereo

Step 10: Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car stereo

Step 11: Connect the Seicane head unit to your original car radio ‘s plugs, and put the new Seicane head unit into the dash.

Step 12: Turn on the new Seicane head unit and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

Above all, you need to make clear every step before you start to install this 2004-2014 Ford F150 F250 F350 head unit in your car. You may encounter any question during the whole process, you can consult your dealer or ask a professional for help. Or you can go to a car radio upgrade center to have it installed.

Besides, it’s essential for you to make sure your new unit can be compatible with your new car. If you don’t have one, I’d like to recommend this advanced 2004-2014 Ford F150 F250 F350 head unit from Seicane to you. Here’s the link, please click:

http://www.seicane.com/seicane-s127302-quad-core-pure-android-dvd-gps-in-dash-radio-system-for-2005-2009-ford-mustang-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera

Just Install this fantastic Ford F150 F250 F350 head unit with a big 7 inch touch screen to improve your car interior and enhance the capabilities at the same time. The built in GPS navigation is of high precision for you to find the best way to your destination within the least time. To simply pair with your enabled mobile phone, you can get access to hands-free calls and music streaming for security and relaxation on a long trip. Wish you like it and have a wonderful time with it!

16May 2016

A detailed installation guide for a 2002-2008 Mercedes Benz E Class W211 radio with Bluetooth Radio Tuner 3G WiFi Mirror Link OBD2

eric ⋅ Leave a Comment

2002-2008 Mercedes Benz E Class W211 radio after installation

With a great aftermarket in your car, you’ll no longer feel bored or tired on a long trip. If you find your factory radio can’t meet your needs anymore, it’ s wise of you to replace it with a brand new aftermarket car radio. To install it easily, you can find a step-by-step installation guide for you to help you. Now I’ d like to introduce the detailed 2002-2008 Mercedes Benz E Class W211 radio installation instruction from Seicane to help you with the installation.

2002-2008 Mercedes Benz E Class W211 radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002-2008 Mercedes Benz E Class W211 radio installation guide

1. The original car radio.

2. Use a lever to release the decoration panel and remove the cigarette lighter.

3. Remove two screws under the 6-disc CD changer and take out the CD changer.

4. Remove the two screws marked with red arrows and pull out the CD player.

5. Connect the cables in the package.
a. Connect with the power cable in the car.
b. Socket for the speaker cable plug in the car.
c. Connect CAN-H, CAN-L with CAN-BUS
d. Connect CAN-TX.

5. Connect the cables in the package.

6. Remove the baffle-plate under the assistant driver seat, connect the CAN-H, CAN-L cable (green)③ with the CAN-BUS socket marked in the picture.

7. Pry the decoration panel beside the driver’s seat, change fuse from 5A TO 10A.

8. Remove the screws for fastening the car pc in the left of the trunk.

9. Find the amplifier in the left of the trunk and remove the four screws marked with red arrows.

10. Remove the amplifier in the car.

11. Connect the speaker cable with the speaker socket ②.

12. Turn on the new Seicane radio to have a careful check if everything works well.

With the help of this detailed installation guide, can you install this new 2002-2008 Mercedes Benz E Class W211 radio on your own? If it’s the first time for you to install a new car radio, then you’d better ask a professional to help you. If there is any question, please don’t hesitate to ask your dealer for help. If you don’t find an ideal radio for your car, I’d like to recommend an ideal 2002-2008 Mercedes Benz E Class W211 radio from Seicane to you, please click for more details:

http://www.seicane.com/seicane-s127501-android-car-stereo-dvd-gps-system-for-2002-2008-mercedes-benz-e-class-w211-e200-e220-e230-e240-with-bluetooth-radio-tuner-3g-wifi-mirror-link-obd2-rearview-camera-dvr-s127501

This hot selling 2002-2008 Mercedes Benz E Class W211 radio features a smoother performance than ever thanks to the upgraded 1GHz Cortex A9 MStar 785 CPU. The advanced bluetooth technology is ideal for you to wirelessly connect with your mobile phone for hands-free calls and streaming music to keep safe and cheerful. You can travel all over the country without getting lost with the help of the turn-by-turn direction and voice prompts provided by the worldwide real-time GPS navigation system.

To enjoy all your trips from now on, this amazing Mercedes Benz E Class W211 radio is just your best choice. Good luck to you!

14May 2016

A skillful installation guide for a 2005 2006 2007 Chrysler 300 Limited/Touring radio with Bluetooth DVD Player Navigation Multimedia System TV AUX

eric ⋅ Leave a Comment

2005 2006 2007 Chrysler 300 Limited Touring radio after installation

To enhance the capabilities of your factory radio, it’s a great idea to replace it with a new aftermarket car radio which can bring you many features to meet your different needs at a time. To help you better install your new radio, I’d like to recommend the detailed 2005 2006 2007 Chrysler 300 Limited/Touring radio installation instruction from Seicane, if you have the same dashboard as the picture below, you can refer to it.

2005 2006 2007 Chrysler 300 Limited Touring radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 Chrysler 300 Limited/Touring radio installation guide

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

5.Check all the accessories for the new Seicane radio.

5.Check all the accessories for the new Seicane car radio.

6.Connect the Seicane radio to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

7.Put the new Seicane radio into the dash.

8.Turn on the new radio and have a test if the new Seicane radio is working without problem..

9.Put trim panel back on your new Seicane radio after the normal test.

All the steps to install a 2005 2006 2007 Chrysler 300 Limited/Touring radio are shown as the above. Can you finish the installation on your own under the guidance of it? If not, you’d better ask a professional for help. By the way, some of you may don’t know how to find a suitable radio for your car, here I’d like to recommend an excellent 2005 2006 2007 Chrysler 300 Limited/Touring radio from Seicane to you. Please click for more details:

http://www.seicane.com/2002-2005-2006-2007-chrysler-300-limited-touring-300c-300m-gps-radio-bluetooth-dvd-player-navigation-multimedia-audio-system-tv-aux-ipod-iphone-backup-camera-steering-wheel-control-t6015

With this intelligent Chrysler 300 Limited/Touring radio in your car, you can enjoy both your favorite videos and music to relax in your car with this powerful multimedia player which can support a variety of audio and video formats including MP4/MPEG/MPG/ASF/WMV/MOV/AVI/3GP/M4V/MGV/VW/DIVX/MKV/WVX/MPV,etc. Turn on the GPS function, intelligent route planning, turn-by-turn direction and voice prompts are all provided for you to arrive at your destination. To keep safe and pleasant, you can easily sync with your enabled mobile phone for hands-free calls and music streaming.

To have a different journey from now on, just install this amazing Chrysler 300 Limited/Touring radio in your car. Good luck to you!

12May 2016

Professional 9 steps to install a 2005 2006 2007 Dodge Magnum head unit with MP3 Dual Zone AUX USB SD Bluetooth TV Tuner

eric ⋅ Leave a Comment

2005 2006 2007 Dodge Magnum head unit after installation

To find the best way to your desired destination, a real-time GPS navigation system of high accuracy can provide you with the lane assist, landmark display, route planning, turn-by-turn direction and voice prompts, etc. However, some of factory radios can’ t support GPS navigation function, in that case, you can easily replace it with a multifunctional head unit which is integrated with a 3D GPS navigation system and a powerful DVD player. The picture below is a modern 2005 2006 2007 Dodge Magnum head unit from Seicane, if you also have the same dashboard, you can refer to this detailed Dodge Magnum head unit installation instruction for help.

2005 2006 2007 Dodge Magnum head unit after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 Dodge Magnum head unit installation guide

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

6.Connect the Seicane unit to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

8.Turn on the new radio and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

Can you install your new 2005 2006 2007 Dodge Magnum head unit under the guidance of this instruction on your own? If not, you can consult your dealer or ask a professional for help. Please make clear every step before you start to install your new unit.

In addition, it’s necessary for you to find a fitting head unit for your car. If you have no idea about which unit can fit your car, I’d like to share an ideal 2005 2006 2007 Dodge Magnum head unit from Seicane for you to upgrade your factory radio, please click for more details:

http://www.seicane.com/car-stereo-radio-gps-navigation-audio-system-for-2002-2007-dodge-intrepid-magnum-neon-with-dvd-bluetooth-tv-tuner-mp3-dual-zone-aux-steering-wheel-control-usb-sd-t6015

This intelligent Dodge Magnum head unit features a lot of advanced and practical functions for your convenience and enjoyment on your way, including 3D GPS navigation system, DVD multimedia player, FM/AM radio, bluetooth music, bluetooth hands-free calls, TV, Ipod, USB and SD card connection, etc. What’s more, this car stereo can be connected with a backup camera to aid in parking.

Just refresh your driving experience with this special Dodge Magnum head unit on all your trips. Take it and go right now!

11May 2016

Simply replace a 2007 2008 Jeep Compass (W/Factory NAV) radio with 9 steps

eric ⋅ Leave a Comment

2007 2008 Jeep Compass (W Factory NAV) radio after installation

To keep yourself, your families and friends entertained all the way, you can easily count on an intelligent car radio which can not only guide you to your desired destination with the most accurate direction but also offer a lot of entertainment options for you to have great fun in your car. Now I’ d like to share a step-by-step 2007 2008 Jeep Compass (W/Factory NAV) radio installation guide from Seicane with you. If you want to upgrade your factory radio and also have the same dashboard, it’s helpful for you.

2007 2008 Jeep Compass (W Factory NAV) radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 Jeep Compass (W/Factory NAV) radio installation guide

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

5.Check all the accessories for the new Seicane radio.

5.Check all the accessories for the new Seicane car radio.

6.Connect the Seicane radio to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

7.Put the new Seicane radio into the dash.

7.Put the new Seicane stereo into the dash.

8.Turn on the new radio and have a test if the new Seicane radio is working without problem..

9.Put trim panel back on your new Seicane radio after the normal test.

Can you install your new 2007 2008 Jeep Compass (W/Factory NAV) radio with the help of this instruction? If you think it too hard for you to install it on your own, it’ s strongly suggested you have a professional install it. If you have any question, you can consult your dealer.

In addition, it’ s necessary for you to make clear you have a fitting radio for your car. If you haven’t found one, I’d like to recommend a wonderful 2007 2008 Jeep Compass (W/Factory NAV) radio from Seicane to you. Here’s the link, please click:

http://www.seicane.com/hd-touch-screen-auto-a-v-gps-navigation-system-for-2006-2007-2008-jeep-commander-compass-with-dvd-tv-tuner-am-fm-radio-bluetooth-steering-wheel-control-usb-sd-mp3-t6015

With this modern Jeep Compass (W/Factory NAV) radio in your car, a wide range of capabilities are available for you when you replace this unit in your vehicle, like the worldwide real-time GPS navigation system, region-free DVD player, bluetooth technology, FM/AM radio, wifi, TV, etc. Besides, you can add a reverse camera to help you park more easily.

Just enjoy all your trips with this amazing Jeep Compass (W/Factory NAV) radio in your car. Good luck to you!

10May 2016

Simply upgrade a 2002 2003-2007 Jeep Grand Cherokee head unit with 9 steps

eric ⋅ Leave a Comment

2002 2003-2007 Jeep Grand Cherokee head unit after installation

Here shows you a brilliant 2002 2003-2007 Jeep Grand Cherokee head unit from Seicane. It’s with the OEM design to fit your 2002 2003-2007 Jeep Grand Cherokee to the best style. What benefits can I get from a new upgraded unit? Actually, the most up-to-date radio features are all easily available for you to meet your different needs in your car. Besides, the most important thing is that you’ll get the most extraordinary experience than before. To install a new unit in your car, you can search for the instruction for it. Now I’ d like to share a step-by-step Jeep Grand Cherokee head unit installation instruction from Seicane for your reference.

2002 2003-2007 Jeep Grand Cherokee head unit after installation

Some tips before the installation:

Please disconnect the power before the installation.
Please prepare a lever and a screwdriver before the removal and the installation.
Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002 2003-2007 Jeep Grand Cherokee head unit installation guide

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

6.Connect the Seicane unit to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

8.Turn on the new radio and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

Above all, you need to understand all the steps before you start to install it. If you don’t have the installation experience before, you can turn to a professional for help. Or you can directly go to a car head unit center to install it. If you have any question during the whole process, it’s suggested you consult your dealer.

To have a successful car head unit upgrade, it’s necessary for you to pick up a suitable unit for your car. If you have no idea how to choose from, you can refer to this wonderful 2002 2003-2007 Jeep Grand Cherokee head unit from Seicane, which can support a wide range of features to meet your different needs. Here’s the link, please check it out for more details:

http://www.seicane.com/aftermarket-radio-gps-dvd-player-for-2002-2007-jeep-grand-cherokee-liberty-patriot-wrangler-with-bluetooth-music-tv-ipod-iphone-usb-sd-mp3-aux-rearview-camera-t6015

This Jeep Grand Cherokee head unit is loaded with a 1GHz Cortex A9 MStar 785 CPU to provide smoother performance and quicker response for you to upgrade your factory radio. A number of audio and video formats can be compatible, which includes MP4/MPEG/MPG/ASF/WMV/MOV/AVI/3GP/M4V/MGV/VW/DIVX/MKV/WVX/MPV, so that you can keep your passengers away from feeling boring and tired on a long trip. Its powerful GPS navigation system can be a perfect road companion to your destination by offering text-to-speech guidance to you. You can also make and receive hands-free calls via bluetooth wireless connection.

To enjoy all your trips in your car, this Jeep Grand Cherokee head unit is just your best choice to take into consideration! Just take it and go right now!

09May 2016

Upgrade a 2007 2008 Dodge Caliber head unit with simple 9 steps

eric ⋅ Leave a Comment

2007 2008 Dodge Caliber head uni after installation

Travelling in one’s one car has become more and more prevailing these years. On a long trip, a relaxing experience naturally means a lot to both drivers and passengers. In that case, car owners try their best to improve their car interior environment. Among all the ways, replacing the factory radio with a new one is the easiest and the best. If you also have such a plan, a detailed head unit installation guide can be helpful for you. Here I’d like to share a step-by-step 2007 2008 Dodge Caliber head unit installation guide from Seicane with you. Wish you can get some help from it.

2007 2008 Dodge Caliber head uni after installation

Some tips before the installation:

Please disconnect the power before the installation.
Please prepare a lever and a screwdriver before the removal and the installation.
Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 Dodge Caliber head unit installation guide

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

6.Connect the Seicane unit to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

8.Turn on the new radio and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

That’s all the removal and installation instruction for a 2007 2008 Dodge Caliber head unit. Please make clear every step before you start to install a new stereo. If you encounter any problem during the whole process, you can ask your dealer for help. If you don’t have enough experience to install a new unit, you can turn to a professional for help.

In addition, do you have a suitable unit for your car? If not, I’d like to recommend an intelligent 2007 2008 Dodge Caliber head unit from Seicane to you. It’ s an ideal head unit replacement for 2007 2008 Dodge Caliber owners. For more details, you are welcome to click the link as follow:

http://www.seicane.com/top-2006-2007-2008-dodge-caliber-in-dash-dvd-gps-audio-navigation-system-bluetooth-music-tv-tuner-radio-rds-aux-usb-sd-ipod-iphone-steering-wheel-control-reverse-camera-t6015

This top Dodge Caliber head unit comes with a With a 5 inch 800*400 multi-touch screen, you can enjoy your favorite videos to relax yourself and your passengers in your car. The region-free DVD multimedia player enables you to play all DVD disks all over the world. By simply connecting your compatible mobile phone, you can make and receive hands-free calls and stream music to ensure safety and enjoyment during your driving. The functions of your steering wheel control can still remain after the installation. Just take it and enjoy yourself from now on!

1 2 Next »

Monthly Archives: May 2016

A detailed installation guide to upgrade a 2003-2011 VW Volkswagen Touran car stereo with Bluetooth 3G WIFI TV Tuner DVR USB SD 1080P Video

A professional installation guide for a 2007-2013 Buick Enclave car radio with Mirror Link OBD2 3G WiFi 1024*600 Multi-touch Capacitive Screen

An easy installation guide for a 2006-2009 Ford Fusion car stereo with 16G Flash 3G WiFi Bluetooth Mirror Link OBD2

How to replace a 2004-2014 Ford F150 F250 F350 head unit with 16G Flash 3G WiFi Bluetooth Mirror Link OBD2 Rearview Camera Quad-core

A detailed installation guide for a 2002-2008 Mercedes Benz E Class W211 radio with Bluetooth Radio Tuner 3G WiFi Mirror Link OBD2

A skillful installation guide for a 2005 2006 2007 Chrysler 300 Limited/Touring radio with Bluetooth DVD Player Navigation Multimedia System TV AUX

Professional 9 steps to install a 2005 2006 2007 Dodge Magnum head unit with MP3 Dual Zone AUX USB SD Bluetooth TV Tuner

Simply replace a 2007 2008 Jeep Compass (W/Factory NAV) radio with 9 steps

Simply upgrade a 2002 2003-2007 Jeep Grand Cherokee head unit with 9 steps

Upgrade a 2007 2008 Dodge Caliber head unit with simple 9 steps

Post Navigation

Recent Posts

Views

Recent Comments

Archives

Subscribe

Categories

Meta