Monthly Archives: June 2016

If you are unsatisfied with the single function of your factory radio, then it’s a great idea for you to upgrade it with an aftermarket head unit which can support a lot of new features. To help you easily upgrade, here I’d like to share a professional installation guide from Seicane specially for a 2000-2006 TOYOTA COROLLA EX head unit with you. If you own a 2000-2006 TOYOTA COROLLA EX , you can take it as a reference.

2000-2006 TOYOTA COROLLA EX head unit after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000-2006 TOYOTA COROLLA EX head unit installation guide

1.Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

2.Remove the top panel and set it aside.

Remove the top panel and set it aside

3.Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

4.Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

5.Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

6.Check all the accessories for the new Seicane car radio. Connect the harnesses to the back of the new Seicane car radio.

7.Connect the Seicane car radio to your original car radio ‘s plugs.

8.Put the new Seicane car radio into the dash.

9.Turn on the new Seicane car radio and have a comprehensive check if it works well.

10.Install 4 screws back to their original position.

11.Install the trim panel back to its original place.

In a word, you need to make clear about every step before you start to install this 2000-2006 TOYOTA COROLLA EX head unit in your car. If there is any question, you can seek help from your dealer. If you don’t have any experience on the installation, it’s strongly suggested you ask a professional to install your new unit. If you are still looking for a suitable head unit for your car, I’d like to recommend an excellent TOYOTA COROLLA EX head unit from Seicane to you. Please click for more details:

http://www.seicane.com/seicane-s126012-2000-2006-toyota-corolla-ex-android-gps-radio-car-audio-system-with-touch-screen-3g-wifi-dvd-player-bluetooth-obd2-mirror-link-steering-wheel-control-backup-camera-1080p

With this top 2000-2006 TOYOTA COROLLA EX head unit in your car, turn-by-turn directions, lane assist, voice guidance, 3D street views, intelligent route planning, and points of interest (POI) can be provided for you by its built-in navigation. Hands-free calls for safe driving and streaming from music are also supported via the bluetooth technology. With DVD/CD player and an AM/FM radio, an awesome media player can effortlessly play all of internet’s popular audio and video file formats, you can be sure to be entertained on your road trips. Just go and have a great time!

Do you want to relax yourself with more entertainment options in your car when you feel bored or tired? If yes, it’s a great idea for you to upgrade your factory radio with a multifunctional car radio which can be compatible with a lot of features. Please look at the picture below, it’s a wonderful 2003-2010 TOYOTA VIOS head unit from Seicane after installation. If you also have the same dashboard, you can take this 2003-2010 TOYOTA VIOS head unit installation guide as a reference.

2003-2010 TOYOTA VIOS head unit after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003-2010 TOYOTA VIOS head unit installation guide

1.Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

2.Remove the top panel and set it aside.

Remove the top panel and set it aside

3.Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

4.Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

5.Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

6.Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

7.Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit

8.Connect the Seicane head unit to your original car radio ‘s plugs.

9.Put the new Seicane head unit into the dash.

10.Turn on the new Seicane head unit and have a comprehensive check if it works well.

11.Install 4 screws back to their original position.

12.Install the trim panel back to its original place.

Above all, you need to make clear about every step before you start to install this 2003-2010 TOYOTA VIOS head unit in your car. If there is any question, you can seek help from your dealer. If you don’t have any experience on the installation, it’s strongly suggested you ask a professional to install your new unit. If you are still looking for a suitable head unit for your car, I’d like to recommend an amazing 2003-2010 TOYOTA VIOS head unit from Seicane to you. Please click for more details:

http://www.seicane.com/seicane-s126003-anroid-2003-2010-toyota-vios-radio-gps-head-unit-with-touch-screen-bluetooth-3g-wifi-obd2-dvd-player-mirror-link-video-steering-wheel-control-aux-rearview-camera

Featured with a GPS to be used with most GPS software, this 2003-2010 TOYOTA VIOS head unit will navigate you wherever you want to go. You can easily get access to bluetooth hands-free calls for a safer driving and bluetooth music by connecting your bluetooth-enabled mobile phones to this unit. The DVD/CD player entertains you with a variety of ways such as videos, radio, USB and Ipod connection just as a king of an in-car entertainment center! Just take it and have fun with it!

First shows you an appealing picture taken the installation of a 2000-2006 TOYOTA COROLLA EX head unit from Seicane. If you are going to replace your factory radio, such a radio can meet what you need in your car, such as GPS navigation, Bluetooth, DVD Player, WIIF, FM/AM radio, TV, etc. The installation is quite easy. Here comes a step-by-step TOYOTA COROLLA EX head unit installation guide for your reference. Wish you can get some help.

2000-2006 TOYOTA COROLLA EX head unit after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000-2006 TOYOTA COROLLA EX head unit installation guide

1.Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

2.Remove the top panel and set it aside.

Remove the top panel and set it aside

3.Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

4.Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

5.Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

6.Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

7.Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car radio

8.Connect the Seicane head unit to your original car radio ‘s plugs.

9.Put the new Seicane head unit into the dash.

10.Turn on the new Seicane head unit and have a comprehensive check if it works well.

11.Install 4 screws back to their original position.

12.Install the trim panel back to its original place.

Can you understand all the installation steps for a 2000-2006 TOYOTA COROLLA EX head unit? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this amazing TOYOTA COROLLA EX head unit from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:

http://www.seicane.com/seicane-s126002-2000-2006-toyota-corolla-ex-android-gps-radio-car-audio-system-with-touch-screen-3g-wifi-dvd-player-bluetooth-obd2-mirror-link-steering-wheel-control-backup-camera-1080p

This top 2000-2006 TOYOTA COROLLA EX head unit comes with a big 6.2 inch HD 800*480 multi-touch screen and a wide variety of features including GPS, Bluetooth, DVD, FM/AM radio, RDS, USB connection, etc. It will not only provide you with accurate directions with a touch of a button but also entertain you on the way. Bluetooth hands-free calling is also available to keep you safe during the driving. Wish you like this 2000-2006 TOYOTA COROLLA EX head unit and have a great time with it!

A new aftermarket head unit is usually integrated with a lot of features to meet different car  owner’s needs. If you find your factory radio can’t catch up with the latest features, you can easily upgrade it with a new aftermarket unit. If you don’t know how to install it, you can have it installed by a professional. A step-by-step installation guide is also helpful. The following is a detailed Universal car stereo installation guide from Seicane. Wish you can get some help from it.

Universal car stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Universal car stereo installation guide

1. Use a screwdriver to remove two screws above the original car radio.

Use a screwdriver to remove two screws above the original car radio

2. Remove the trim panel.

Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.

Remove the trim panel

3. Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

4. Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car stereo to your original car radio ‘s plugs.

8. Turn on the new Seicane car stereo to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.

9. After the test, please put the new Seicane car stereo into the dash.

10. Install all the screws and the trim panel into their original place.

The detailed installation guide for a Universal car stereo is shown as the above. Wish you can get some help from it. If there is any question, you can consult your dealer. However, if you can’t finish it on your own, you’d better ask a professional for help. If you are still looking for an ideal car stereo for your car, you can refer to this intelligent Universal car stereo from Seicane. Please click for more details:

http://www.seicane.com/seicane-s126005-aftermarket-hd-touch-screen-2-din-universal-android-radio-replacement-with-gps-dvd-player-3g-wifi-bluetooth-music-mirror-link-obd2-backup-camera-dvr-aux-usb-sd-1080p-video

This top Universal car stereo comes with a great deal of features including gps navigation system, bluetooth function, Ipod function, etc. With current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn voice directions, it will be your perfect road companion. Another thing worth noting is that you can play your favorite TV shows, dramas and movies via a SD card or USB thumb drive that plugs directly into this wonder player. Go to your desired destination with ease, this Universal car stereo is just your best choice!

If you are going to upgrade your factory radio, you can find a detailed installation guide to help you. Related installation videos or guides can both be helpful. If you own a 2003-2009 KIA CERATO and have the same dashboard, you can take this Seicane 2003-2009 KIA CERATO head unit installation instruction as a reference.

2003-2009 KIA CERATO head unit after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003-2009 KIA CERATO head unit installation guide

1. The original car radio.

The original car radio

2. Pry around the edges of the panel with a lever, and then remove the panel with your hands.

Pry around the edges of the panel with a lever, and then remove the panel with your hands

3. Disconnect all the connectors at the back of the panel.

Disconnect all the connectors at the back of the panel

4. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver

5. Take the original radio out of the dash.

Take the original radio out of the dash

6. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio

7. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane head unit to your original car radio ‘s plugs.

10. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane head unit into the dash.

12. Put everything into their original place.

Can you understand all the installation steps for a 2003-2009 KIA CERATO head unit ? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this popular 2003-2009 KIA CERATO head unit from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:

http://www.seicane.com/seicane-s127678-android-radio-gps-navigation-system-for-2003-2009-kia-cerato-with-dvd-player-bluetooth-touch-screen-3g-wifi-mirror-link-obd2-video-dvr-aux-rearview-camera

This remarkable 2003-2009 KIA CERATO head unit features with built-in GPS navigation, DVD player, Bluetooth, radio, etc., you can almost get everything you want from a car stereo. You can have a joyful driving experience with the multimedia functions such as bluetooth streaming music, DVD, CD, radio, etc. Just have a great time with it. Good luck!

To remove an original car radio, you can find a detailed installation video or guide to help you. After that, you can easily have your new head unit installed. Here I’d like to share a step-by-step installation guide from Seicane about a 2014 Nissan QashQai head unit with you. Wish you can get some help from it.

2014 Nissan QashQai head unit after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2014 Nissan QashQai head unit installation guide

1. Remove the right trim panel with a lever.

Remove the right trim panel with a lever

2. Remove the left trim panel with the same way as step 1.

Remove the left trim panel with the same way as step 1

3. Pry the edges of the a/c controller with a lever.

Pry the edges of the air conditioner controller with a lever

4. Take the a/c controller out of the dash.

Take the air conditioner controller out of the dash

5. Unscrew all the screws holding the original car radio in place with a screwdriver.

Unscrew all the screws holding the original car radio in place with a screwdriver

6. Gently take the original car radio out the dash.

7. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

8. Check all the accessories for the new Seicane head unit.

9. Connect the harnesses to the back of the new Seicane head unit.

10. Connect the Seicane head unit to your original car radio ‘s plugs.

11. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane head unit into the dash.

13. Put everything into their original place.

With this step-by-step installation instruction specially for 2014 Nissan QashQai head unit, can you install your new unit in your car? If you find it too hard for you, you’d better turn to a professional for help. For any question before and during the installation, you can also seek help from your dealer.

Furthermore, please make sure you have a right car stereo for your car. If you have no idea about this, you can refer to this wonderful 2014 Nissan QashQai head unit from Seicane. For more details, please click:

http://www.seicane.com/seicane-s128007-all-in-one-android-2014-nissan-qashqai-radio-gps-cd-dvd-player-auto-av-system-touch-screen-bluetooth-wifi-3g-mirror-link-obd2-steering-wheel-control

This powerful 2014 Nissan QashQai head unit is available at present with a large quantity of upgraded features such as faster and more stable RK3188 1.6 GHz Cortex A9 Quad-core CPU and a larger 8 inch HD 1024*600 multi-touch screen for a more intuitive user interface. You can also watch movies or listen to your favorite songs from many other sources like USB, iPod, SD card and so on. It is also with GPS navigation system built-in for a turn-by-turn direction to your desired destinations. Navigate to your desired destination with ease, this amazing 2014 Nissan QashQai head unit is just your best choice!

Do you desire a multifunctional car stereo which can bring a lot of convenience and enjoyment to you on the way to your desired destination? If yes, then this article is worth your careful reading, which is a step-by-step installation guide for a 2014 2015 Toyota Highlander head unit from Seicane. Please look at the picture below, if you are a car owner of a 2014 2015 Toyota Highlander and also have the same dashboard, you can take this passage as a reference.

2014 2015 Toyota Highlander head unit after installation

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2014 2015 Toyota Highlander head unit installation guide

1. Pry the trim panel with a lever, then remove it.

Pry the trim panel with a lever, then remove it

2. Pry the plastic piece around the a/c vent wiht a lever, then remove it with your hands.

Pry the plastic piece around the ac vent wiht a lever, then remove it with your hands

3. Pry the left a/c vent with the lever, after that, remove it with your hands. Then do the same with the right a/c vent.

Pry the left ac vent with the lever, after that, remove it with your hands. Then do the same with the right ac vent

4. Remove four screws holding the radio with a screwdriver.

Remove four screws holding the radio with a screwdriver

5. Take the original radio out of the dash with your hands.

Take the original radio out of the dash with your hands

6. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio

7. Check all the accessories for the new Seicane head unit.

8. Connect the harnesses to the back of the new Seicane head unit.

9. Connect the Seicane head unit to your original car radio ‘s plugs.

10. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. If there is no problem, put the new Seicane head unit into the dash, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane unit.

That’s all the installation instruction for a 2014 2015 Toyota Highlander head unit in particular. If you have any question, you can turn to your dealer for help. If it’s the first time for you to install a new unit in your car, you’d better ask a professional for help. Do you get an ideal head unit for your car? If not, I’d like to recommend an ideal 2014 2015 Toyota Highlander head unit from Seicane to you. For more details, you are welcome to check it out with the following link:

http://www.seicane.com/seicane-s121061-10-1-inch-android-in-dash-bluetooth-gps-navigation-system-for-2014-2015-toyota-highlander-with-hd-1024-600-touch-screen-3g-wifi-radio-rds-mirror-link-obd2-rearview-camera-aux-usb-sd-steering-wheel-control-quad-core-cpu-s121061

This powerful Toyota Highlander head unit will entertain you with a number of features for fun, such as DVD, CD, iPod and radio, etc., then you won’t feel bored and tired with its company in the long-distance travel. What’s more, you can go anywhere without getting lost with the help of the precise GPS navigation it provides for you. To have fun all the way, this amazing Toyota Highlander head unit is just your best choice! Good luck to you!

To install a new aftermarket car stereo in your car, a lot of convenience and enjoyment is easily available for you, such as GPS navigation function, DVD player, FM/AM radio, wifi, Bluetooth hands-free calling, Bluetooth streaming music, etc. Therefore, more and more car owners are going to upgrade their factory radio. If you also have such a plan, you can refer to this detailed installation guide from Seicane specially for a 2005-2013 VW Volkswagen SAGITR head unit.

2005-2013 VW Volkswagen SAGITR head unit after installation

Please note before the installation:    

1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2.A lever and a screwdriver need to be prepared before the installation.

3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2013 VW Volkswagen SAGITR head unit installation guide

1.Remove the top panel with a lever.

Remove the top panel with a lever

2.Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

3.Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

4.Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

5.Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

6.Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

7.Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

8.Remove the panel on the original car radio.

Remove the panel on the original car radio

9.Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

10.Take the original car radio out of the dash.

Take the original car radio out of the dash

11.Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

12.Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

13.Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car radio

14.Connect the Seicane head unit to your original car radio ‘s plugs.

15.Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16.Put the new Seicane head unit into the dash.

17.Put everything into their original place.

Are you able to install this 2005-2013 VW Volkswagen SAGITR head unit in your car with the help of this step-by-step installation? If you find it too hard for you, you’d better turn to a professional for help. Before and during the installation, you can also seek help from your dealer if you encounter any problem.

Besides, it’s necessary for you to make sure you have a right car stereo for your car. If you have no idea about this, you can refer to this wonderful 2005-2013 VW Volkswagen SAGITR head unit from Seicane. Here’s the link, please click:

http://www.seicane.com/seicane-s128405-8-inch-android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth

This intelligent VW Volkswagen SAGITR head unit allows you to easily navigate your route with the high precision 3D GPS and enjoy music via connecting bluetooth with your mobile phones on the large 8″ touch screen display. With a memory card port and a rearview camera RCA input, the stereo will meet all of your entertainment needs. Add quality and performance to your audio system with this all-in-one VW Volkswagen SAGITR head unit.

To find the best way to your desired destination, you can easily count on a GPS navigation system. Nowadays, a GPS navigation system can also meet your different needs on entertainment in your car. If you worry about the installation, you can read this passage carefully for reference, it’s about the installation instruction from Seicane specially for a 2005-2011 VW Volkswagen TRANSPORTER(T5) head unit.

2005-2011 VW Volkswagen TRANSPORTER(T5) head unit after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2011 VW Volkswagen TRANSPORTER(T5) head unit installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car radio

14.Connect the Seicane head unit to your original car radio ‘s plugs.

15.Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16.Put the new Seicane head unit into the dash.

17.Put everything into their original place.

With the help of this detailed instruction, can you install this 2005-2011 VW Volkswagen TRANSPORTER(T5) head unit in your car on your own? If not, you’d better have a professional install it. If you have any question, you can turn to your dealer for help.If you don’t get an ideal head unit, I’d like to recommend an ideal VW Volkswagen TRANSPORTER(T5) head unit from Seicane to you. For more details, you can click:

http://www.seicane.com/seicane-s128405-8-inch-android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth

The superior VW Volkswagen TRANSPORTER(T5) head unit comes with high precision 3D navigation with voice guidance and has a large 8 inch HD multi-touch screen. It also has built-in Bluetooth for streaming from music for fun and hands-free call to keep safe all the way while driving. This model features the responsive, powerful and intuitive user interface that is quite easy to use and highly customizable. Why not take it right now and have fun with it?

When finding your factory radio can’ t meet all your needs, what would you do? Some car owners may add new features to it. However, not all the factory radio can be compatible with the modern features. Therefore, the wonderful idea is to replace it with a new multifunctional head unit which comes with great utilities and extension for new features. About the installation, here I’d like to introduce a professional 2010-2013 VW Volkswagen POLO car radio installation guide from Seicane to you. If you have the same dashboard as the picture below, you can take it as a reference to help with the installation of your new unit.

2010-2013 VW Volkswagen POLO car radio after installation

Precautions:

1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2.A lever and a screwdriver need to be prepared before the installation.

3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2010-2013 VW Volkswagen POLO car radio installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

14.Connect the Seicane car radio to your original car radio ‘s plugs.

15.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16.Put the new Seicane car radio into the dash.

17. Put everything into their original place.

Wish the installation above specially for the 2010-2013 VW Volkswagen POLO car radio can be helpful for you. If you have any question, you can consult your dealer. On the other hand, if you find the dashboard in the guide different from yours, please don’t worry, it won’t have much influence on the whole.

Before the installation, it’s essential for you to make sure you have a suitable radio for your car. If you have no idea about this, you can refer to this modern 2010-2013 VW Volkswagen POLO car radio from Seicane. Here’s the link, please click:

http://www.seicane.com/seicane-s128405-8-inch-android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth

The precise navigation is in your reach with this top VW Volkswagen POLO car radio whenever and wherever you go. You can also download thousands of songs to enjoy on the road and meanwhile manage your documents in the outdoor. The beautiful music, the dramatic sound effect and the convenient devices will bring you the best driving experience and make you have the wonderful car life ever since. Good luck to you!