Monthly Archives: September 2016

You are browsing the site archives by month.
2005-2009 Ford Mustang stereo gps radio dvd after installation

Some car owners will think the installation work is only mastered by professionals. It’s difficult for you to install the new car radio by yourself. But in fact, you can install the car radio easily with the a step-by-step installation guide. So, I’d like to recommend a installation guide for a 2005-2009 Ford Mustang stereo gps radio dvd from Seicane to you for your reference.

2005-2009 Ford Mustang stereo gps radio dvd after installation

2005-2009 Ford Mustang stereo gps radio dvd after installation

 

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2005-2009 Ford Mustang stereo gps radio dvd installation guide

1. Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Remove screws securing center console lid with a screwdriver

2. Remove the trim and the center console trim around gear shifter.

2-1.Remove the trim and the center console trim around gear shifter

2-1.Remove the trim and the center console trim around gear shifter

2-2

2-2

3. Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Remove console side panels on both driver and passenger sides

4. Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Remove bolts securing radio bezel and AC controls

5. Unplug AC controls from passenger and driver side.

5-1.Unplug AC controls from passenger and driver side

5-1.Unplug AC controls from passenger and driver side

5-2

5-2

6. Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Remove the radio bezel and AC controls

7. Remove screws securing radio to the vehicle, and take the original radio out of the dash.

7-1.Remove screws securing radio to the vehicle, and take the original radio out of the dash

7-1.Remove screws securing radio to the vehicle, and take the original radio out of the dash

7-2

7-2

8. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

9. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

10. Connect the Seicane car stereo to your original car radio ‘s plugs, and put the new Seicane car stereo into the dash.

11. Turn on the new Seicane car stereo and check whether the radio is working properly.

12. Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

 

That’s all the installation guide for a 2005-2009 Ford Mustang stereo gps radio dvd. If you don’t have any experience of installation, it suggests you to the dealer ask for help. Or arrange the professional to install it directly. Besides, you have to find the suitable new car radio for your car at first. If you don’t have one yet, here is a great 2005-2009 Ford Mustang stereo gps radio dvd from Seicane as reference.

http://www.seicane.com/seicane-s127302-quad-core-pure-android-dvd-gps-in-dash-radio-system-for-2005-2009-ford-mustang-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera

This 2005-2009 Ford Mustang stereo gps radio dvd with a new modern multimedia unit which comes with built-in navigation system, Bluetooth, USB connection, etc. The large 7 inch HD 1024*600 multi-touch screen is ideal for the better view of your road ahead. To make your long journey different and meaningful, this unit is your perfect companion!

2001-2008 Toyota RAV4 Sat Navi dvd stereo after installation

How to upgrade the old factory radio by yourself? This is the question for most car owners want to know. In fact, it’s very simple to install the new car radio by yourself with a detailed installation instruction. So, in here I’d like to share a installation instruction for a 2001-2008 Toyota RAV4 Sat Navi dvd stereo from Seicane to you and wish you can learn something from it.

2001-2008 Toyota RAV4 Sat Navi dvd stereo after installation

2001-2008 Toyota RAV4 Sat Navi dvd stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2001-2008 Toyota RAV4 Sat Navi dvd stereo installation instruction

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane head unit.

7. Connect the harnesses to the back of the new Seicane head unit.

8. Connect the Seicane head unit to your original car radio ‘s plugs.

9. Put the new Seicane head unit into the dash.

10. Turn on the new Seicane head unit and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

All above is the detailed installation instruction for a 2001-2008 Toyota RAV4 Sat Navi dvd stereo. If you find your dashboard is different from the picture shown above, please rest assured that the installation instruction is much same. Or you can arrange the dealer or professional to install it directly.

Besides, you have to check the new car radio in first time and make sure it can work well in your car. If you are still looking for one, I have a wonderful 2001-2008 Toyota RAV4 Sat Navi dvd stereo from Seicane to recommend to you. Please feel free to check it in this link:

http://www.seicane.com/android-oem-car-stereo-gps-bluetooth-for-2001-2008-toyota-rav4-with-dvd-player-navigation-system-mirror-link-hd-touch-screen-obd-dvr-tv-usb-sd-3g-wifi-backup-camera-ipod-s166229

With this most up-to-date 2001-2008 Toyota RAV4 Sat Navi dvd stereo, you can meet all your needs of a car radio. The car radio is equipped with worldwide real-time navigation function of high accuracy. You can also use the Bluetooth function to connect your phone and play your favorite music in your car. Wish you like it and good luck to you!

2004-2006 Toyota Corolla head unit after installation

Many car owners may have tried to stop the car in order to ask the way. But if you install the new head unit with the newest 3D GPS navigation system, you can go wherever just you want. How can I install the new head unit in my car? I will share a step-by-step installation guide for a 2004-2006 Toyota Corolla head unit from Seicane to you and wish you can get something from it.

2004-2006 Toyota Corolla head unit after installation

2004-2006 Toyota Corolla head unit after installation

Here are the safety notes for the installation

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult

the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004-2006 Toyota Corolla head unit installation guide

1. Remove the panel with a lever on the both side and disconnect the wire.

1-1. Remove the panel with a lever and pull it away from dash

1-1. Remove the panel with a lever and pull it away from dash

1-2

1-2

2. Unscrew the four bolts holding the original car radio.

Unscrew the four bolts holding the original car radio

Unscrew the four bolts holding the original car radio

3. Take out the car radio and disconnect the wire harness at the back of the unit.

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-2

3-2

4. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

5. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

6. Connect the Seicane car radio to your original car radio ‘s plugs.

7. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

8. Put the new Seicane radio into the dash.

9. Put everything into their original place. All the installation is done.

All above is the step-by-step installation guide for a 2004-2006 Toyota Corolla head unit. You can try to install it with this guide. If you don’t have any experience of installation, it suggests you to the dealer or professional for help or arrange them to install it directly. Beyond that, the first thing for you is to find a suitable head unit. If you don’t have one yet, this is a great 2004-2006 Toyota Corolla head unit from Seicane to recommend to you.

http://www.seicane.com/android-aftermarket-car-stereo-gps-navigation-system-for-2004-2006-toyota-corolla-with-dvd-player-radio-bluetooth-hd-touch-screen-obd-dvr-rear-view-camera-tv-usb-sd-3g-wifi-ipod-mirror-link-s166957

The multimedia 2004-2006 Toyota Corolla head unit comes with intelligent pure android 5.1.1 operation system and equipped with worldwide real-time navigation function of high accuracy. You can download the APP in the android market and surfing internet via 3G or WiFi. You can also go anywhere with this accurate navigation system. Wish you like it!