Monthly Archives: November 2016

You are browsing the site archives by month.
2011 2012 VW Volkswagen LAVIDA GPS Navigation Car Stereo after installation

When you have a self-driving travel with your families or friends, to keep them entertained all the way, you can easily upgrade your factory radio with a new car radio which can be compatible with almost popular multimedia formats. To help with your new car radio installation, I’d like to share a detailed installation guide on a 2011 2012 VW Volkswagen LAVIDA GPS Navigation Car Stereo with you. If you have the same dashboard, you can start your work following the instruction below.

2011 2012 VW Volkswagen LAVIDA GPS Navigation Car Stereo after installation

2011 2012 VW Volkswagen LAVIDA GPS Navigation Car Stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2011 2012 VW Volkswagen LAVIDA car stereo installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish the above installation instruction can be helpful for you. If there is something wrong with your installation, you can seek help from your dealer or a professional. However, before the installation, it is very essential for you to check whether your new car radio can fit well with your beloved car or not. If your new car radio is not suitable enough, I’d like to recommend you to click the link below for a 2011 2012 VW Volkswagen LAVIDA GPS Navigation Car Stereo from Seicane.

http://www.seicane.com/10-2-inch-1024-600-touchscreen-android-2011-2012-vw-volkswagen-lavida-radio-gps-navigation-system-with-4g-wifi-cpu-quad-core-steering-wheel-control-bluetooth-s301018

With dedicated interface as well as high performance, this Seicane car stereo for a 2011 2012 VW Volkswagen LAVIDA can be a good replacement of your outdated factory radio. Thanks to its additional entertainment function, you won’t get bored in car when you turn on this multimedia receiver to play DVDs, CDs, FM/AM radio. Besides, when traveling in an unfamiliar place, you won’t get lost any time and any where when you press the “GPS” button and take advantage of it. Wish you enjoy your journey with your families or friends along with this wonderful 2011 2012 VW Volkswagen LAVIDA gps nav car stereo!

2007-2012 FIAT BRAVO Radio DVD Navigation System after installation

Are you looking forward to upgrading your factory radio with a new aftermarket car stereo? If your answer is “yes”, then you need a related car stereo installation. Though there are some differences among many car radios, they are largely identical. The following is a 2007-2012 FIAT BRAVO Radio DVD Navigation System installation guide which can be taken as your reference. Wish you can learn something from it.

2007-2012 FIAT BRAVO Radio DVD Navigation System after installation

2007-2012 FIAT BRAVO Radio DVD Navigation System after installation

4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2007-2012 FIAT BRAVO car stereo installation guide

1. Remove the bottom panel.

Remove the bottom panel

Remove the bottom panel

2. Insert two release keys into the removal slots of the original radio.

Insert two release keys into the removal slots of the original radio

Insert two release keys into the removal slots of the original radio

3. Pull outwards to release the original car radio.

Pull outwards to release the original car radio

Pull outwards to release the original car radio

4. Disconnect the wiring loom and the aerial lead to release the stereo.

Disconnect the wiring loom and the aerial lead to release the stereo

Disconnect the wiring loom and the aerial lead to release the stereo

5. Check all the accessories for the new Seicane car stereo.

6. Connect the harnesses to the back of the new Seicane car stereo.

7. Connect the Seicane car stereo to your original stereo’s plugs.

8. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car stereo into the dash.

10. Put everything into their original place. All the installation is done.

 

If there is any question, you can consult your dealer for seeking advice. Or during the installation, you can ask someone experienced or a professional to help you alongside. But if you don’t have a suitable car stereo and are looking for one, I would like to share a 2007-2012 FIAT BRAVO Radio DVD Navigation System from Seicane with you. For more details, please click:

http://www.seicane.com/oem-android-for-2007-2012-fiat-bravo-radio-dvd-gps-navigation-system-with-wifi-backup-camera-bluetooth-mirror-link-steering-wheel-control-obd2-dab-dvr-aux-s32772

Even though you have no good sense of direction, this 2007-2012 FIAT BRAVO Radio DVD Navigation System with powerful 3D GPS navigation system can help you a lot. With the help of the worldwide real-time navigation, you can accurately and punctually get to your desired destinations because of these features, which include 3D street view, landmark building display, turn-by-turn voice directions, etc. Besides, by simply pairing the car stereo with your Bluetooth-enabled mobile phone, you are able to dial, receive or reject hands-free calls and enjoy Bluetooth music from your phone music playlists, which can largely promise you a very safe and relaxing driving experience. Wish you like it!

1998-2008 PEUGEOT 307 dvd player car radio after installation

When referring to installation of a car stereo, you may think it hard and should be done by a professional with much expertise and rich experience. As a matter of fact, you are capable of achieving the car stereo installation if you are provided with a correct installation guide. A step-by-step 1998-2008 PEUGEOT 307 dvd player car radio installation guide from Seicane is as followings. If you have a same or similar dashboard, you can read it carefully and take it as a reference.

1998-2008 PEUGEOT 307 dvd player car radio after installation

1998-2008 PEUGEOT 307 dvd player car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

1998-2008 PEUGEOT 307 car stereo installation guide

1. The original car radio.

The original car radio

The original car radio

2. Prepare a pair of DIN style removal keys.

Prepare a pair of DIN style removal keys

Prepare a pair of DIN style removal keys

3. There are four removal slots in the radio, as shown below.

There are four removal slots in the radio, as shown below

There are four removal slots in the radio, as shown below

4. Insert the release keys into the holes of the radio.

Insert the release keys into the holes of the radio

Insert the release keys into the holes of the radio

5. Pull outwards to release the radio.

Pull outwards to release the radio

Pull outwards to release the radio

6. Unplug the connectors at the back of the radio.

Unplug the connectors at the back of the radio

Unplug the connectors at the back of the radio

7. Check all the accessories for the new Seicane car stereo.

8. Connect the harnesses to the back of the new Seicane car stereo.

9. Connect the Seicane car stereo to your original stereo’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you. If you think it hard to deal with some problems independently, you can consult your dealer for good advice or ask a professional for help. Besides, it is essential for you to check if your new car stereo can work well in your car. If not, it suggests you to quit it and buy a suitable one. You can search online and check the following link which is about a 1998-2008 PEUGEOT 307 dvd player car radio from Seicane.

http://www.seicane.com/oem-android-1998-2008-peugeot-307-radio-dvd-player-gps-navigation-system-with-wifi-backup-camera-bluetooth-mirror-link-steering-wheel-control-obd2-dab-dvr-aux-s32636

Since this 1998-2008 PEUGEOT 307 dvd player car radio is upgraded to the latest Android 5.1.1 operation system and possess a 1.6 GHz Cortex A9 Quad-core CPU, it can be one of your best choices to replace your factory radio, by far. The 3D GPS navigation system is specially built in for you to find the correct way to arrive at your destinations anytime and anywhere. Besides, the additional entertainment features can add a lot of joyfulness to your trip. Wish you enjoy your in-car life accompanied by this car stereo. Good luck to you!

2008-2013 OPEL INSIGNIA gps nav head unit after installation

Under the circumstance that your old factory radio cannot be compatible with many modern features, you’d better install a new aftermarket head unit which is integrated with many practical and entertainment features. And you will gain a high-quality in-car life because of these features. This article is about a detailed installation guide for a 2008-2013 OPEL INSIGNIA gps nav head unit. If you have a same or similar dashboard, you can read it carefully and take it as reference.

2008-2013 OPEL INSIGNIA gps nav head unit after installation

2008-2013 OPEL INSIGNIA gps nav head unit after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2008-2013 OPEL INSIGNIA head unit installation instruction

1. Remove the trim with a plastic removal tool.

Remove the trim with a plastic removal tool

Remove the trim with a plastic removal tool

2. Remove screws that are holding the radio trim panel.

Remove screws that are holding the radio trim panel

Remove screws that are holding the radio trim panel

3. Remove the trim panel and then disconnect the connectors and cables behind.

Remove the trim panel and then disconnect the connectors and cables behind

Remove the trim panel and then disconnect the connectors and cables behind

4. Unscrew four screws that fixed the radio on the dashboard.

Unscrew four screws that fixed the radio on the dashboard

Unscrew four screws that fixed the radio on the dashboard

5. Softly pull outwards to release the radio.

Softly pull outwards to release the radio

Softly pull outwards to release the radio

6. Disconnect connectors at the back of the radio; please use a removal tool if necessary.

Disconnect connectors at the back of the radio; please use a removal tool if necessary

Disconnect connectors at the back of the radio; please use a removal tool if necessary

7. Release the touch screen.

Release the touch screen

Release the touch screen

8. Check all the accessories for the new Seicane head unit.

9. Connect the harnesses to the back of the new Seicane head unit.

10. Connect the Seicane head unit to your original stereo’s plugs.

11. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane head unit into the dash.

13. Put everything into their original place. All the installation is done.

 

With the installation instruction, do you know how to install a 2008-2013 OPEL INSIGNIA gps nav head unit now? If there are some problems you cannot solve independently, you can consult your dealer for good advice or ask a professional to help you alongside. However, if you still think it hard to finish the whole installation successfully, it is suggested that you should go to a car stereo upgrade center to install your new head unit. To help you choose a suitable head unit, I’d like to share a great 2008-2013 OPEL INSIGNIA gps nav head unit from Seicane with you. You may check the link below for more details:

http://www.seicane.com/8-inch-1024-600-touchscreen-2008-2013-opel-insignia-android-radio-dvd-gps-navigation-system-with-bluetooth-steering-wheel-control-mirror-link-wifi-backup-camera-obd2-dab-dvr-s32753

As this head unit is featured with the most advanced high-end 3D GPS navigation system, you can be guided anywhere and anytime to reach your ideal destinations though the text-to-speech guidance. Besides, Bluetooth module is specially built in to make it possible for you to dial, receive or reject hands-free phone calls as well as enjoy streaming music from your phone music playlists through the connection between your enabled cell phone and this unit. Therefore, without keeping your hands off the steering wheel, you can also keep your driving safer and happier. Wish you enjoy your trip with this excellent 2008-2013 OPEL INSIGNIA gps nav head unit all the way.

2014 OPEL Insignia Bluetooth dvd player after installation

What will you if you own a 2014 OPEL Insignia, and want to develop a comfortable in-car environment as well as embrace a perfect driving experience? If I were you, I would like to upgrade the factory radio in car with a more intelligent one. If you have the same idea, I would like to share a related car stereo installation instruction with you to help with your installation. For more details, please keep reading.

2014 OPEL Insignia Bluetooth dvd player after installation

2014 OPEL Insignia Bluetooth dvd player after installation

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2014 OPEL Insignia car stereo installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Now do you know how to install a 2014 OPEL Insignia Bluetooth dvd player? If not, you can seek advice from your dealer or ask a professional for help. But if you don’t have any related experience before and you still think it hard to finish the whole installation process by yourself, you can directly arrange a technician to install the car stereo. Besides, it is essential for you to see if your new car stereo can work well in your car. If it is not suitable, I’d like to share a remarkable    car stereo from Seicane for your reference. Please check out the link below for more details.

http://www.seicane.com/8-inch-2014-opel-insignia-android-in-dash-radio-dvd-gps-bluetooth-3g-wifi-mirror-link-dvr-obd2-dab-steeing-wheel-control-backup-camera-s32548

With this great car stereo installed in your 2014 OPEL Insignia, you are able to enjoy a brand new driving experience since it comes with a wide range of practical and entertainment features can meet your various needs, which include: high-end 3D GPS navigation system, hands-free calls, Bluetooth music, DVD/ CD player, radio tuner, etc. By making full of these modern features, you are able to create a more comfortable and convenient environment as well. Wish you like it and good luck to you!

2014 2015 Hyundai ix25 bluetooth car stereo after installation

Do you own a 2014 2015 Hyundai ix25, and think your factory radio is too old for you to get access to some upgraded features? If yes, perhaps you need to replace your factory radio with a brand new car stereo and a related installation guide can help you to some extent. Today, I would like to share a 2014 2015 Hyundai ix25 bluetooth car stereo installation guide with you. If you have the same vehicle type, you can read it carefully.

2014 2015 Hyundai ix25 bluetooth car stereo after installation

2014 2015 Hyundai ix25 bluetooth car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2014 2015 Hyundai ix25 bluetooth car stereo installation guide

1.The original car radio.

The original car radio

The original car radio

2.Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

2-1

2-1

3.Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

4.Remove the car radio and unplug the connectors at the back of the radio.

Remove the car radio and unplug the connectors at the back of the radio

Remove the car radio and unplug the connectors at the back of the radio

5. Check all the accessories for the new Seicane car stereo.

6. Connect the harnesses to the back of the new Seicane car stereo.

7. Connect the Seicane car stereo to your original stereo’s plugs.

8. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car stereo into the dash.

10. Put everything into their original place. All the installation is done.

 

Wish the above car stereo installation guide can be helpful with you. If there is any question, you can consult your dealer for valuable advice. And you can also ask someone experienced or a professional to help you alongside. But if you have had a compatible car stereo for your car yet, I would like to share a link with you which is about a marvelous 2014 2015 Hyundai ix25 bluetooth car stereo from Seicane. For more details, please click:

http://www.seicane.com/9-inch-1024-600-touchscreen-2014-2015-hyundai-ix25-adroid-5-1-1-gps-car-stereo-with-radio-dvd-player-bluetooth-steering-wheel-control-backup-camera-obd2-dvr-dab-s32584

This great 2014 2015 Hyundai ix25 bluetooth car stereo, with a large 9 inch 1024*600 multi-touch screen, allows you to enjoy the best visual effect of videos or navigation. And it comes with a wide range of practical and entertaining features, including GPS navigation system, Bluetooth, DVD, FM/AM radio, Wi-Fi, etc, which can make sure that you have an excellent driving experience. One of the highlights of this car stereo is that the car steering wheel still remains its original function after car stereo installation. If you like this car stereo, just take it and have a ton of fun with it.

2000-2005 Mercedes Benz C Class W203 usb music head unit after installation

First of all, please look at the image below which is a 2000-2005 Mercedes Benz C Class W203 usb music head unit after installation. To help with your better upgrading by installing an advanced head unit, I’d like to share a step-by-step 2000-2005 Mercedes Benz C Class W203 usb music head unit installation guide with you. If you have a same or similar dashboard, you can follow this installation guide.

2000-2005 Mercedes Benz C Class W203 usb music head unit after installation

2000-2005 Mercedes Benz C Class W203 usb music head unit after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2000-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 head unit installation instruction

1.The original car radio.

The original car radio

The original car radio

2.Use a special plastic tool to remove the trim bezel.

Use a special plastic tool to remove the trim bezel

Use a special plastic tool to remove the trim bezel

2-1

2-1

3. Use a plastic remove tool to push up the heat vent.

Use a plastic remove tool to push up the heat vent

Use a plastic remove tool to push up the heat vent

3-1

3-1

4.Remove 2 hidden screws with a screwdriver below the vent.

Remove 2 hidden screws with a screwdriver below the vent

Remove 2 hidden screws with a screwdriver below the vent

4-1

4-1

5. Push down the vent and loose it.

Push down the vent and loose it

Push down the vent and loose it

6.Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

7. Remove 2 screws that are holding the car radio.

Remove 2 screws that are holding the car radio

Remove 2 screws that are holding the car radio

7-1

7-1

8.Take out the original car radio.

Take out the original car radio

Take out the original car radio

9.Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio

Unplug the connectors and cables at the back of the radio

10. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

Check all the accessories for the new Seicane head unit

11.Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit

Connect the harnesses to the back of the new Seicane head unit

12.Connect the Seicane head unit to your original stereo’s plugs.

13.Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14.Put the new Seicane head unit into the dash.

15.Put everything into their original place. All the installation is done.

 

Don’t worry if you find there is some difference between your dashboard with the dashboard shown in the guide, and it won’t have much influence on the installation. If you have any question, you can seek help from your dealer or professionals. But before the installation, please check the compatibility between your new head unit and your car. If you have no ideas, you can refer to this intelligent 2000-2005 Mercedes Benz C Class W203 usb music head unit from Seicane. For more details, please click:

http://www.seicane.com/seicane-s127507-2000-2005-mercedes-benz-c-class-w203-c180-c200-c220-c230-android-sat-nav-in-dash-radio-stereo-with-bluetooth-dvd-mirror-link-obd2-3g-wifi-cpu-hd-1024-600-multi-touch-screen-s127507

Featured with high configurations as well as great compatibilities, this intelligent 2000-2005 Mercedes Benz C Class W203 usb music head unit can become one of the best choices to upgrade your factory radio. For practical features, when you driving around an unfamiliar place, you can turn on the GPS navigation system to find the best way to reach your ideal destinations. For entertaining functions, when you get tired and bored in car, you can play any compatible videos, TV programs, FM/AM radio, music, etc to cheer you up. Wish you like it!

2011 Ford C Max dvd car stereo after installation

When you’re driving with your families or friends, do you all feel fatigue in the car for a long time? In that case, you can turn on the car radio and play some beautiful music or wonderful movies to refresh you all. But when you find your radio cannot be compatible with some multimedia formats and some other modern features, you should replace your factory radio with an upgraded multi-functional car stereo. If you have a 2011 Ford C Max, I would like to share a related car stereo installation guide to you.

2011 Ford C Max dvd car stereo after installation

2011 Ford C Max dvd car stereo after installation

4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2011 Ford C Max dvd car stereo installation guide

1.The original car radio.

The original car radio

The original car radio

2.Remove one bar under the stereo with a plastic removal tool.

Remove one bar under the stereo with a plastic removal tool

Remove one bar under the stereo with a plastic removal tool

2-1

2-1

3.Remove two screws that fixed the trim panel.

Remove two screws that fixed the trim panel

Remove two screws that fixed the trim panel

4.Gently take out the trim panel.

Gently take out the trim panel

Gently take out the trim panel

4-1

4-1

5.Remove screws fixed the radio.

Remove screws fixed the radio

Remove screws fixed the radio

6.Pull out the original car radio.

Pull out the original car radio

Pull out the original car radio

7.Unplug the connectors at the back of the car radio.

Unplug the connectors at the back of the car radio

Unplug the connectors at the back of the car radio

8. Check all the accessories for the new Seicane car stereo.

9. Connect the harnesses to the back of the new Seicane car stereo.

10. Connect the Seicane car stereo to your original stereo’s plugs.

11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car stereo into the dash.

13. Put everything into their original place. All the installation is done.

 

Wish you can get some help from the above installation guide. Before installation, please make sure you understand every detailed step. If you encounter some problems, you are welcome to seek advice from your dealer or turn to a professional for help. But if you don’t have a suitable car stereo and you are still looking for it, I would like to recommend an ideal 2011 Ford C Max dvd car stereo from Seicane to you. For more details, please click:

http://www.seicane.com/seicane-s127305-8-inch-android-radio-bluetooth-navigation-system-for-2011-ford-c-max-with-cd-dvd-player-3g-wifi-mirror-link-obd2-reverse-camera-hd-1024-600-multi-touch-capacitive-screen

Even though you are poor at identifying directions, the GPS navigation system can be very helpful for you. Under the guidance of the high-end GPS navigation system, you can accurately and punctually reach your ideal destinations because of features like 3D street view, landmark building display, turn-by-turn voice directions, etc. Besides, hands-free calls and Bluetooth music are available when you connect your enabled phone with this unit under the Bluetooth technology.

Wish this marvelous 2011 Ford C Max dvd car stereo from Seicane become one of your best choices to replace your factory radio. Good luck to you!

2003-2011 Audi A3 S3 gps head unit after installation

To replace your factory radio with a new head unit not only helps you get access to a wide range of upgraded features but also makes your driving experience up a level. Therefore, as you can see, there is a trend that more and more car owners upgrade their factory radios with new head units on their own to improve their in-car environment. If you want to be one of them, what you need is a correct installation guide as well as some related experience. It doesn’t matter if you have no experience before. The following is the step-by-step installation instruction from Seicane for a 2003-2011 Audi A3 S3 gps head unit. If you have a same or similar dashboard, you can refer to it.

2003-2011 Audi A3 S3 gps head unit after installation

2003-2011 Audi A3 S3 gps head unit after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2003-2011 Audi A3 S3 gps head unit installation instruction

1.The original head unit.

The original head unit

The original head unit

2. Prepare four removing keys. (PC2-132, European Removal)

Prepare four removing keys

Prepare four removing keys

3. Insert four keys into the gap between the stereo and the dashboard. Put the key with the flat side facing the outside of the stereo, then have a push.

Insert four keys into the gap between the stereo and the dashboard. Put the key with the flat side facing the outside of the stereo, then have a push

Insert four keys into the gap between the stereo and the dashboard. Put the key with the flat side facing the outside of the stereo, then have a push

4.Take out the original head unit.

Take out the original head unit

Take out the original head unit

5.Unplug all the connector at the back of the original head unit.

Unplug all the connector at the back of the original head unit

Unplug all the connector at the back of the original head unit

6. Check all the accessories for the new Seicane head unit.

7. Connect the harnesses to the back of the new Seicane head unit.

8. Connect the Seicane head unit to your original stereo’s plugs.

9. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane head unit into the dash.

11. Put everything into their original place. All the installation is done.

 

After reading the above installation instruction for a 2003-2011 Audi A3 S3 gps head unit, can you finish the whole installation process on your own now? If you have any questions, you’re welcome to consult your dealer or seek help from someone experienced. If you still think it impossible for you to finish the whole installation process by yourself, you’d better go to a car stereo upgrade centre for installing your new head unit. If you haven’t had a suitable head unit, here I would like to recommend a 2003-2011 Audi A3 S3 gps head unit of high quality from Seicane. You may check the link for more details.

http://www.seicane.com/oem-dvd-player-radio-gps-navigation-system-for-2003-2011-audi-a3-s3-with-hd-1024-600-touch-screen-bluetooth-ipod-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-mirror-link-s167012

This advanced 2003-2011 Audi A3 S3 gps head unit, based on the latest Android 5.1.1 operation system and a powerful quad-core processor can replace your factory radio and be compatible with a lot of upgraded functions and new features. A wide range of features can provide you great convenience as well as enjoyment in your car, such as 3D GPS navigation system, Bluetooth technology, DVD/CD player, FM/AM radio, Rearview camera, USB &SD connection and so on. If you like it, just add it to cart and enjoy your driving with it in your car from now on!

2011-2014 Hyundai Grandeur gps nav car stereo after installation

As everyone knows, to upgrade a car stereo integrated with both practical and entertainment features is becoming more and more prevalent among many car owners. It is necessary for you to upgrade a car stereo if you want to enjoy more convenience and enjoyment in your car and improve your driving experience. Actually, it is not hard to install a car stereo if you follow a correct installation guide. So if you are going to install a 2011-2014 Hyundai Grandeur gps nav car stereo in your car, you can read this article carefully to get some help.

2011-2014 Hyundai Grandeur gps nav car stereo after installation

2011-2014 Hyundai Grandeur gps nav car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2011-2014 Hyundai Grandeur car stereo installation guide

1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2.Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4.Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7.If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish the installation guide can help with your 2011-2014 Hyundai Grandeur gps nav car stereo installation to some extent. Before the installation, please make sure you are clear about every detailed step. If you have any question, you can turn to your dealer for help. Or you can arrange a professional to install the car stereo straightly if you still think the installation is too complicated for you. Besides, if you are still search for a compatible car stereo for your car, I’d like to share a great 2011-2014 Hyundai Grandeur gps nav car stereo from Seicane with you. For more details, please click:

http://www.seicane.com/8-inch-2011-2014-hyundai-grandeur-android-radio-gps-navigation-system-with-bluetooth-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-dvd-player-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-mirror-link-s168068

This 2011-2014 Hyundai Grandeur gps nav car stereo is very intelligent as it is based on the Android 5.1.1 operation system and a RK3188 1.6 GHz Cortex A9 quad-core CPU, which will facilitate your operation. With a large 8 inch multi-touch smart screen, you are able to enjoy the best visual effect when you are playing a movie, music video or TV programs, etc. With such a marvelous car stereo installed in your car, you can easily control GPS navigation, DVD player, Bluetooth and other features. Just enjoy your trip with this device in your beloved car. Good luck to you!