Monthly Archives: December 2016

You are browsing the site archives by month.
2011-2015 HYUNDAI Sonata i40 i45 Radio after installation

Are you eager to save a certain amount of money on the replacement of your factory radio? If your answer is “yes”, then you can try to install the new car radio on your own, which can help reduce some budget to some extent. With some related installation experience and a correct guide, you can finish the installation in several easy steps. Here I would like to share a 2011-2015 HYUNDAI Sonata i40 i45 car radio installation instruction with you. If you also own the same dashboard, you can take this instruction as a reference.

2011-2015 HYUNDAI Sonata i40 i45 Radio after installation

2011-2015 HYUNDAI Sonata i40 i45 Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011-2015 HYUNDAI Sonata i40 i45 car radio installation instruction

1. Squeeze the two side panels and remove it.

Squeeze the two side panels and remove it

Squeeze the two side panels and remove it

1-1

1-1

2. Remove screws that fixed the radio panel.

Remove screws that fixed the radio panel

Remove screws that fixed the radio panel

3. Pry the trim panel with a plastic removal tool to remove the panel.

Pry the trim panel with a plastic removal tool to remove the panel

Pry the trim panel with a plastic removal tool to remove the panel

3-1

3-1

3-2

3-2

4. Remove screws that are holding the radio on the dashboard.

Remove screws that are holding the radio on the dashboard

Remove screws that are holding the radio on the dashboard

4-1

4-1

5. Gently take out the original car radio.

Gently take out the original car radio

Gently take out the original car radio

6. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the Unplug the connectors and cables at the back of the radioback of the radio

Unplug the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original stereo’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

That’s all about the whole removal and installation process for a 2011-2015 HYUNDAI Sonata i40 i45 car radio. If you meet any questions during the installation, you’re welcome to contact your dealer for a wiring diagram or seek help from a professional. Before the installation, it is vital to check the compatibility between your new car radio and your beloved car. If you don’t have any ideas, I’d like to recommend a 2011-2015 HYUNDAI Sonata i40 i45 gps bluetooth dvd car radio to you. Here is the link, please click:

http://www.seicane.com/fr/10-1-inch-android-ecran-tactile-systeme-de-navigation-gps-pour-2011-2015-hyundai-sonata-i40-i45-avec-bluetooth-3g-wifi-video-radio-tpms-dvr-obd-ii-camera-arriere-aux-usb-sd-controle-de-la-direction-s301176

This car radio is powerful enough to be the best replacement for your factory radio for your 2011-2015 HYUNDAI Sonata i40 i45. With the assist of the built-in 3D GPS navigation system of high accuracy, you can be provided with the best routes and be guided to anywhere you like. When you simply wirelessly connect your Bluetooth-enabled mobile phone with this car radio via the built-in Bluetooth module, you are able to make, receive or reject hands-free phone calls as well as enjoy streaming audio to promise you a safe and pleasant trip. Just install this 2011-2015 HYUNDAI Sonata i40 i45 car radio in your beloved car and have a good time!

2009-2014 Honda Odyssey Radio after installation

Perhaps some of car owners think it a job only done by a technician to install a new car radio, so many of them go to a car stereo upgrade center to have their stereos successfully installed but cost a certain amount of money as well. To save some money, you can finish the installation on your own with a correct installation guide. The picture below is a modern 2009-2014 Honda Odyssey car radio from Seicane, if you have the same dashboard, you can refer to the following installation guide.

2009-2014 Honda Odyssey Radio after installation

2009-2014 Honda Odyssey Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009-2014 Honda Odyssey car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

The above is the installation guide for a 2009-2014 Honda Odyssey car radio. Wish you can learn something useful from it. If you meet any difficulties during the whole process, you’d better ask a professional technician to help you for the first time.

So have you found an ideal radio for your 2009-2014 Honda Odyssey yet? If not, I’d like to share a great 2009-2014 Honda Odyssey gps bluetooth car radio from Seicane for you. You may check out the following link for more deatails.

http://www.seicane.com/10-2-inch-hd-touch-screen-2009-2014-honda-odyssey-android-radio-gps-navigation-with-rearview-camera-digital-tv-steering-wheel-control-wifi-bluetooth-music-16g-flash-cpu-quad-core-s301174

Upgraded to the latest firmware and software, this amazing 2009-2014 Honda Odyssey car radio is up-to-date enough to be the best replacement for your factory radio. The advanced GPS navigation system of this radio makes it easier for you to have the best route options to reach your destinations. And you are able to get access to hands-free calls and streaming audio through the wireless Bluetooth connection between your enabled mobile phone and this car radio. Besides, some entertainment features are also supported to make your long trip filled with joyfulness. Just install this 2009-2014 Honda Odyssey car radio in your car and enjoy your brand new driving experience in the future!

2013-2016 Suzuki SX4 Radio after installation

To enrich the in-car life, most car owners are trying more and more ways. And one of the most popular ways is to replace the factory radio with a new aftermarket radio. A new car radio not only can bring convenience and enjoyment but also is easy to install. If you plan to upgrade your factory radio, you can find a correct installation guide to help you. Here is an installation guide for a 2013-2016 Suzuki SX4 car radio. If you own the same dashboard, you can refer to the following 2013-2016 Suzuki SX4 car radio installation guide.

2013-2016 Suzuki SX4 Radio after installation

2013-2016 Suzuki SX4 Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2013-2016 Suzuki SX4 car radio installation guide

1. Pry the indicator light with a plastic knife and disconnect the connector at the back of it.

Pry the indicator light with a plastic knife and disconnect the connector at the back of it

Pry the indicator light with a plastic knife and disconnect the connector at the back of it

1-1

1-1

2. Remove the air vent with a plastic removal tool.

Remove the air vent with a plastic removal tool

Remove the air vent with a plastic removal tool

3. Remove two top screws that are holding the radio.

Remove two top screws that are holding the radio

Remove two top screws that are holding the radio

4. Gently take out the original radio.

Gently take out the original radio

Gently take out the original radio

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Before the installation, it’s suggested that you make clear every detailed step. If you have any questions, you can ask your dealer or a professional for help.

To ensure that your upgrading make sense, what matters a lot is that you need to select a suitable car radio specially for your beloved car. If you haven’t had an ideal one yet, I’d like to recommend a 2013-2016 Suzuki SX4 car radio from Seicane to you. For more details, please click:

http://www.seicane.com/9-inch-android-1024-600-touchscreen-2013-2016-suzuki-sx4-radio-gps-navigation-system-with-wifi-4g-bluetooth-music-obd2-dvr-steering-wheel-control-backup-camera-digital-tv-s30954

This 2013-2016 Suzuki SX4 car radio, with exquisite interface and higher configuration, is up-to-date enough for you to replace your factory radio. Upgraded to the most advanced Android 5.0.1 operation system and a R16 1.8GHz A9 Quad-Core CPU, the capabilities of this radio as well as the operation are enhanced and improved.

With it installed in your beloved car, you can go anywhere with the help of the turn-by-turn direction and voice prompts provided by the 3D built-in GPS navigation system of high precision. Besides, thanks to the Bluetooth technology, both hands-free calls and streaming music are available as long as you connect your Bluetooth-enabled mobile phone with this remarkable radio. Just take this 2013-2016 Suzuki SX4 car radio along with your long trip. Good luck to you!

2014 2015 Renault Captur Duster Speaker Sound Audio System after installation

In order to pursue a high-quality in-car life, you may find that it is a good idea for you to replace your factory radio. Some car owners may hold such an opinion that it can cost a certain amount of money if they got the car stereo installed in a car stereo upgrade center. However, if you know how to install a new car stereo by yourself, you can save quite a little money. The image below is a Seicane 2014 2015 Renault Captur Duster Speaker Sound Audio System after installation. If you own the same dashboard, you may refer to the following car stereo installation instruction.

2014 2015 Renault Captur Duster Speaker Sound Audio System after installation

2014 2015 Renault Captur Duster Speaker Sound Audio System after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2014 2015 Renault Captur Duster car stereo installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Above is the installation instruction for a 2014 2015 Renault Captur Duster Speaker Sound Audio System. If there is any question, you are welcome to consult your dealer or turn to someone experienced for seeking valuable advice. If you still think it impossible for you to finish the car stereo installation, you can directly go to a car stereo upgrade center to have your stereo installed by a technician. The following link is an excellent car stereo from Seicane specially for 2014 2015 Renault Captur Duster for you as a reference.

http://www.seicane.com/9-inch-quad-core-android-2014-2015-renault-captur-duster-aftermarket-radio-gps-navigation-system-obd2-4g-wifi-bluetooth-mirror-link-dvr-4g-wifi-manual-air-conditioning-s30948

Loaded with a wide range of comprehensive functions, this up-to-date car stereo will be one of your wise choices to replace your factory radio for 2014 2015 Renault Captur Duster. With it installed in your car, thanks to the turn-by-turn directions and voice prompts provided by 3D GPS navigation, you are able to reach your destinations where is even hard-to-find sometimes. Besides, the Bluetooth pairing functionality allows you to stay focused on the road ahead and keep your keep your hands on the steering wheel control to get access to phone calls and streaming music. Wish you have a good time in car accompanied by this intelligent car stereo!

2010-2013 Mitsubishi ASX gps bluetooth Car Stereo after installation

With the development of science and technology, more and more intelligent car stereos being produced, and to replace a car stereo is becoming more and more popular with car owners who don’t need to spend a lot of money or time to enjoy great convenience and have a brand new driving experience. If you own a 2010-2013 Mitsubishi ASX, you can take this article as a reference for the installation when you are going to install a new car stereo on your own.

2010-2013 Mitsubishi ASX gps bluetooth Car Stereo after installation

2010-2013 Mitsubishi ASX gps bluetooth Car Stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2010-2013 Mitsubishi ASX car stereo installation

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic knife to pry the trim panel and remove it.

Use a plastic knife to pry the trim panel and remove it

Use a plastic knife to pry the trim panel and remove it

2-1

2-1

2-2

2-2

3. Remove screws that are holding the radio.

Remove screws that are holding the radio

Remove screws that are holding the radio

4. Take out the original car radio.

Take out the original car radio

Take out the original car radio

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Some questions may occur to you during the whole process, and it’s suggested you turn to a professional or your dealer for help. Besides, before the installation, please make sure that you already have a suitable car stereo. If not, you are recommended to check out the following link which is about an ideal 2010-2013 Mitsubishi ASX gps bluetooth Car Stereo from Seicane.

http://www.seicane.com/10-2-inch-android-2010-2013-mitsubishi-asx-radio-gps-navigation-bluetooth-obd2-4g-wifi-steering-wheel-control-backup-camera-mirror-link-16g-flash-cpu-quad-core-s301132

This 2010-2013 Mitsubishi ASX gps bluetooth Car Stereo, which is equipped with the advanced Android 5.0.1 operation system and the powerful Quad-core processor, can greatly smooth the operation and facilitate the performance.

As for the entertainment features, this car stereo comes with a wide range of features, which include: GPS navigation system, Bluetooth connectivity, DVD player, FM/AM radio, RDS, wifi, USB and SD card connection, etc. And a number of optional features can be all supported, like digital TV, DVR, OBDⅡ, 3g module, rearview camera and mirror link. If you like it, don’t hesitate to add it to your cart!

2014 2015 Mazda 3 Axela Bluetooth DVD Stereo after installation

If you want to not only catch up with the trend but also pursue a better in-car life as well as a brand new driving experience, it is a very wise choice for you to replace your factory radio with a new aftermarket car radio. Today I would like to share a detailed installation instruction for    car radio from Seicane with you. If you have a 2014 2015 Mazda 3 Axela, you can take the following instruction for a reference before you start your installation.

2014 2015 Mazda 3 Axela Bluetooth DVD Stereo after installation

2014 2015 Mazda 3 Axela Bluetooth DVD Stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 Mazda 3 Axela installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

The above is the installation instruction for a 2014 2015 Mazda 3 Axela Bluetooth DVD Stereo. If you encounter any problems you cannot solve, you can contact with your dealer for seeking valuable advice or turn to a professional for help. To make sure you can replace a car radio with great success, it’s quite important you have a right replacement for your car; here I’d like to share a great 2014 2015 Mazda 3 Axela Bluetooth DVD Stereo from Seicane with you as a reference. For more details, please click:

http://www.seicane.com/android-9-inch-1024-600-touchscreen-2014-2015-mazda-3-axela-gps-navigation-for-with-wifi-usb-obd2-aux-rds-steering-wheel-control-backup-camera-dvr-am-fm-4g-bluetooth-music

This intelligent 2014 2015 Mazda 3 Axela Bluetooth DVD Stereo, based on the advanced Android 5.0.1 operation system and featured with a Quad-core CPU, can provide you with a smooth and stable performance. With the high-precision GPS navigation system, you won’t get lost no matter you are traveling around the country or looking for some service areas through turn-by-turn direction and voice prompts. Besides, to sync your cell phone with this car radio, you are able to dial, receive or reject hands-free calls as well as enjoy bluetooth music streaming from your enabled mobile phone with your hands on the steering wheel control. If you like this car radio, hurry up to add it to your cart!

2014 Buick Envision Car Radio after installation

To get to your ideal destinations without getting lost, you can easily count on an accurate GPS navigation system which can provide worldwide and real-time direction for you. If your original car radio cannot be compatible with GPS function, you can easily upgrade it with a multifunctional car radio. To help you install your new car radio, here I’d like to show you a detailed 2014 Buick Envision Car Radio installation guide from Seicane with you.

2014 Buick Envision Car Radio after installation

2014 Buick Envision Car Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 Buick Envision car radio installation guide

1. Use a screwdriver to remove the screw fixed the panel.

Use a screwdriver to remove the screw fixed the panel

Use a screwdriver to remove the screw fixed the panel

2. Pry the trim panel with a plastic removal tool.

Pry the trim panel with a plastic removal tool

Pry the trim panel with a plastic removal tool

2-1

2-1

3. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

4. Take out the original radio.

Take out the original radio

Take out the original radio

5. Disconnect the connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s all about the installation guide for a 2014 Buick Envision Car Radio. Wish you can get some help from it. If you have anything you cannot understand, you can turn to your dealer or a professional for help. Or you can ask someone experienced to help you alongside. To make sure you can upgrade your factory radio with success, you need to buy a car radio which can fit your car very well. The following link is a great 2014 Buick Envision Car Radio from Seicane for you as a reference.

http://www.seicane.com/1024-600-touch-screen-10-2-inch-2014-buick-envision-android-gps-navigation-system-with-bluetooth-obd2-radio-rds-digital-tv-dvr-steering-wheel-control-backup-camera-s301126

With this upgraded car radio installed in your car, almost all your various needs can be satisfied in your 2014 Buick Envision. Thanks to the built-in GPS navigation system, you can have the best route option to get to your destinations through the turn-by-turn directions and voice prompts. Besides, you can also utilize the Bluetooth technology to make your Bluetooth-enabled mobile phone sync with this radio so as to get access to both Bluetooth hands-free calls and streaming music, which promise you a safer and more relaxing experience. Wish you have a good trip with this 2014 Buick Envision car radio. Good luck!

2015 Chevy Chevrolet Sail Factory Radio after installation

A multifunctional car stereo usually support GPS navigation, DVD player, FM/AM radio, Bluetooth connection, etc., which can meet car owners’ different needs on the way. If you are tired of the single function of your factory radio, then you can consider replacing it with a brand new aftermarket car stereo. Now I’d like to introduce a detailed 2015 Chevy Chevrolet Sail Factory Radio installation instruction from Seicane to you. Wish you can get some help from it.

2015 Chevy Chevrolet Sail Factory Radio after installation

2015 Chevy Chevrolet Sail Factory Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2015 Chevy Chevrolet Sail car stereo installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish the above instructions can do some help for you if you are going to upgrade your factory radio. If you have any questions you cannot understand, you can seek help from your dealer or a professional. To help you better finish the car stereo installation, you need to buy a suitable car stereo which can perfectly fit your car. Here I’d like to recommend an intelligent 2015 Chevy Chevrolet Sail Factory Radio from Seicane to you. Please click:

http://www.seicane.com/10-2-inch-hd-touch-screen-2015-chevy-chevrolet-sail-android-radio-bluetooth-gps-navigation-backup-camera-tpms-digital-tv-steering-wheel-control-cpu-quad-core-s301124

For the practical functions, the built-in 3D GPS navigation of high accuracy makes it easier to find your way and get to the destination with ease. And you can have a safe driving thanks to the Bluetooth connectivity with any mobile phone which has a Bluetooth feature.

While for the entertainment features, you can be filled with joy and comfort contributes to its compatibility with a wide range of audio and video formats including DVD/ VCD/ CD/ MP3/ MPEG/ CD-R/WMA while navigating to your desired destination. Wish you can enjoy your driving with this car stereo and good luck!

2011- Dodge Attitude GPS Bluetooth DVD Car Radio after installation

For the upgrade of the factory radio, some car owners are still worry about that it is too hard to install a new car radio. Actually, the installation of a new car radio is not difficult because it is plug-and-play. You can try to find a correct installation guide to help with the installation. Now I’d like to share a step-by-step 2011- Dodge Attitude GPS Bluetooth DVD Car Radio installation guide from Seicane for your reference.

2011- Dodge Attitude GPS Bluetooth DVD Car Radio after installation

2011- Dodge Attitude GPS Bluetooth DVD Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2011- Dodge Attitude car radio installation guide

1. Use a plastic removal tool to pry the trim panel and remove it.

Use a plastic removal tool to pry the trim panel and remove it

Use a plastic removal tool to pry the trim panel and remove it

1-1

1-1

2. Disconnect connectors at the back of the panel.

Disconnect connectors at the back of the panel

Disconnect connectors at the back of the panel

2-1

2-1

3. Unscrew four screws that fixed the radio on the dashboard.

Unscrew four screws that fixed the radio on the dashboard

Unscrew four screws that fixed the radio on the dashboard

4. Gently take out the original radio.

Gently take out the original radio

Gently take out the original radio

5. Unplug connectors and cables at the back of the radio.

Unplug connectors and cables at the back of the radio

Unplug connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s all about how to remove and install a 2011- Dodge Attitude GPS Bluetooth DVD Car Radio. Before the installation, please make clear every detailed step. If you cannot understand the steps, you can contact your dealer for seeking advice or ask a professional to help you. Anyway, first of all, please make sure that your new car radio can be perfectly installed in your car and can work well in your car. If not, you’d better quit it and purchase another suitable one. Here I’d like to share a 2011- Dodge Attitude GPS Bluetooth DVD Car Radio from Seicane with you, please click the link below for more information.

http://www.seicane.com/9-inch-1024-600-touchscreen-in-dash-android-2011-dodge-attitude-radio-gps-navigation-system-with-bluetooth-4g-wifi-steering-wheel-usb-obd2-rds-control-mirror-link-s30928

Upgraded to the most advanced hardware and software, this 2011- Dodge Attitude GPS Bluetooth DVD Car Radio is ideal enough to be the best replacement for your factory radio. The high-end 3D GPS navigation system of high accuracy enables you to have the best route option to reach your desired destination without mistakes with the turn-by-turn direction and voice prompts. Moreover, the Bluetooth technology allows you to pair your Bluetooth-enabled cell phone with this radio, so that you can have hands-free calls and stream music from your mobile phone focusing on the road ahead without keeping your hands off the steering wheel.

Wish you’ll have a good time with this 2011- Dodge Attitude car radio. Good luck to you!

2016 Kia K5 GPS Bluetooth DVD Car Radio after installation

To have more fun in your car, it is highly suggested that you should upgrade your factory radio which can be compatible with a lot of multimedia formats. As the installation of a new car radio is not difficult, you can also become a “professional” who can finish the installation. Now I’d like to share a detailed 2016 Kia K5 GPS Bluetooth DVD Car Radio installation guide from Seicane with you as follows. If you own a 2016 Kia K5, you can refer to it.

2016 Kia K5 GPS Bluetooth DVD Car Radio after installation

2016 Kia K5 GPS Bluetooth DVD Car Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2016 Kia K5 car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

That’s all about how to remove and install a 2016 Kia K5 GPS Bluetooth DVD Car Radio. If you have anything you cannot understand, you can seek help from your dealer or a professional. Besides, you can also ask someone experienced to guide you alongside. To make sure you can succeed in the upgrade, you have to choose a suitable car radio fro your car. If you have no idea, you can refer to this up-to-date Seicane 2016 Kia K5 GPS Bluetooth DVD Car Radio. You may click the link below for more details.

http://www.seicane.com/10-2-inch-android-2016-kia-k5-gps-hd-touchscreen-radio-navigation-system-with-backup-camera-tpms-bluetooth-steering-wheel-control-digital-tv-mirror-link-s301101

Based on the advanced Android 5.0.1 operating system and the powerful 1.8 GHz A9 Quad-core CPU, this smart car radio allows you to enjoy smoother and faster operation experience. With this radio in your car, you can be provided with the most precise direction so as to have the best route option to get to your ideal destinations. By linking your Bluetooth-enabled mobile phone with this radio, you can freely get access to dial, receive or reject hands-free calls by keeping your hands on the steering wheel control, which can promise you a safe driving to a large extent. If you like this car radio, hurry up to add it to your cart!