2017 Januarycar dvd blog

21Jan 2017

How to Upgrade a 2000-2009 VW Volkswagen Polo Pure Stereo with Bluetooth Audio Music System

As a car owner, you may find that with a lot of features to be supported, an aftermarket car radio can meet almost all your various needs in your car, such as GPS navigation, Bluetooth hands-free calls, Bluetooth music, DVD player, etc. If your factory radio isn’t compatible enough, you can replace it with a new multifunctional radio. Today I’d like to share a 2000-2009 VW Volkswagen Polo car radio installation guide from Seicane with you for your reference.

2000-2009 VW Volkswagen Polo car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000-2009 VW Volkswagen Polo car radio installation guide

1. The original car radio.

The original car radio

2. Prepare four removal keys.

Prepare four removal keys

3. There are four removal slots in this radio. Insert the removal keys in the holes of the radio.

There are four removal slots in this radio. Insert the removal keys in the holes of the radio

4. Pull outwards to release the radio.

Pull outwards to release the radio

5. Disconnect the connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

Wish you can get some help from the above installation guide. If you meet any difficulties you cannot overcome independently, you can seek advice from your dealer or ask a experienced person to help you alongside. Or you can directly arrange a professional to help you install the stereo. Anyway, it is very essential for you to check whether your new car stereo is compatible with your beloved car or not. If it is not compatible enough, you’d better quit it and select an ideal one. Here I’d like to recommend a 2000-2009 VW Volkswagen Polo bluetooth car stereo from Seicane to you. For more details, please click:

http://www.seicane.com/seicane-s127648-2000-2009-vw-volkswagen-polo-pure-android-autoradio-gps-in-car-dvd-system-with-3g-wifi-mirror-link-obd2-bluetooth-steering-wheel-control-aux-rearview-camera

With this great 2000-2009 VW Volkswagen Polo stereo installed in your car, you are able to embrace a smoother operation experience since it is equipped with the pure Android 5.1.1 operation system and a RK3188 1.6 GHz Cortex A9 Quad-core processor. With a 7 inch HD 1024*600 multi-touch screen, you are able to enjoy the best display effect when you play videos as well as the good viewing of the road ahead. As for the entertainment options, there are a variety of audio and video formats to be supported to relax both yourself and your passengers, which include DVD,VCD,CD,MP3, MPEG4, etc. Wish you enjoy your trip accompanied by this powerful car stereo.

19Jan 2017

Classic Tips on a 2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum Radio Removal and Installation

eric ⋅ Leave a Comment

2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum car radio after installation

Since the installation of a car radio is not difficult, more and more car owners are capable of installing a new car radio on their own. If you have some related installation experience, you can also achieve the installation by yourself with the help of a correct installation instruction. If you are a car owner of 2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum, you can refer to the following related installation instruction to help with the installation of your car radio.

2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum car radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum car radio installation

1. The original car radio.

The original car radio

2. Adjust the shift lever to a lower gear, then loosen the black plastic part around the shift lever and rotate it aside.

3. Remove two Phillips screws inside the shifter bazel.

Remove two Phillips screws inside the shifter bazel

4. Pull the bottom portion of bazel , start working it around.

Pull the bottom portion of bazel , start working it around

5. Use a flat plastic pry tool to pry the edge between the top platform and the front trim assembly so as to release the top platform.

Use a flat plastic pry tool to pry the edge between the top platform and the front trim assembly so as to release the top platform

6. Remove the top platform.

Remove the top platform

7. Use a screwdriver to unscrew the two top Phillips screws that fix the trim bazel. Then remove the bazel.

Use a screwdriver to unscrew the two top Phillips screws that fix the trim bazel. Then remove the bazel

7-1

8. Remove four mounting screws that are holding the radio on the dashboard.

Remove four mounting screws that are holding the radio on the dashboard

9. Take out the original radio from the dash.

Take out the original radio from the dash

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

Before the installation, please make clear every specific step. If you have anything cannot understand, you can contact with your dealer or ask a professional for help. Besides, it is essential for you to check whether your new car radio can work well in your car or not. If your car radio is not compatible enough, for your better installation, I’d like to recommend an amazing 2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum car radio from Seicane to you. Here comes the link, please click:

http://www.seicane.com/9-inch-2004-2005-2006-dodge-avenger-caliber-challenger-dakota-durango-journey-magnum-android-bluetooth-gps-navigation-system-with-quad-core-cpu-tv-tuner-usb-aux-steering-wheel-control-s088713

This intelligent car radio, specially designed for 2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum, is compatible with a wide range of features which can meet almost all your various needs. Based on the most advanced Android 6.0 operation system and a R16 1.6 GHz Quad-core CPU, this radio runs faster than ever and facilitates its operation. After the installation of this car radio, it is possible for you to get access to a lot of features, including high-precision 3D GPS navigation, Bluetooth streaming music, Bluetooth hands-free calls, DVD player, FM/AM radio, DVD, etc. If you like this radio, don’t hesitate to add it to your cart! Good luck to you!

18Jan 2017

A Simple Tutorial on a 2009-2013 TOYOTA AVENSIS Radio Removal and Installation with an USB Port GPS Navigation System

eric ⋅ Leave a Comment

2009-2013 TOYOTA AVENSIS Radio after installation

The picture below shows an amazing 2009-2013 TOYOTA AVENSIS car stereo from Seicane after installation, which comes with a wide range of practical and entertainment features for you to upgrade your factory radio. Here I would like to share a detailed installation guide for 2009-2013 TOYOTA AVENSIS car stereo with you. If you plan to replace your factory radio, you can refer to the guide carefully.

2009-2013 TOYOTA AVENSIS Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2013 TOYOTA AVENSIS car stereo installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane head unit into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new head unit.

Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new head unit

Now can you understand all the steps to remove and install a 2009-2013 TOYOTA AVENSIS car stereo? If you can’t fully understand, you can seek help from your dealer or a professional. Or you can ask an experienced person to help you alongside. Besides, it is really necessary for you to check the compatibility between your new car stereo and your car. If you have no ideas, you can refer to this 2009-2013 TOYOTA AVENSIS gps dvd car stereo from Seicane and take it as a reference. Here is the related link, please click:

http://www.seicane.com/8-8-inch-1280-480-android-4-4-in-dash-radio-2009-2013-toyota-avensis-new-with-3g-wifi-bluetooth-tpms-dvr-obdii-rear-camera-aux-steering-wheel-control-usb-1080p-capacitive-touch-screen-mirror-link-usb-s082723

Based on the pure Android 6.0 operation system and R16 1.6 GHz Quad-core CPU, this car stereo with a 9 inch HD 1280×480 multi-touch digital capacitive LCD screen can be the best choice to replace your factory radio with its high configuration, performance as well as delicate interface. Thanks to the built-in 3D GPS navigation system of high accuracy, it is easy for you to find the best way to arrive at your desired destinations. Besides, with the help of the wireless bluetooth technology, you can freely have hands-free calls and enjoy Bluetooth music by simply pairing your Bluetooth-enabled mobile phone with this unit, which not only brings you convenience but also a lot of fun. Just add it your cart and enjoy your journey with it from now on!

17Jan 2017

How to Install a new 2012 2013 2014 Subaru Forester Stereo with Speaker Subwoofer

eric ⋅ Leave a Comment

2012 2013 2014 Subaru Forester Stereo after installation

To build up a comfortable and convenient car interior environment as well as a brand new driving experience, you can upgrade your factory radio with a new aftermarket stereo compatible with both practical functions and features. As the installation process is not so difficult that you can install the stereo under the guidance of an installation instruction. Here comes a detailed installation instruction on a 2012 2013 2014 Subaru Forester car stereo from Seicane. If you also have the same dashboard, you can refer to this related instruction.

2012 2013 2014 Subaru Forester Stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2012 2013 2014 Subaru Forester car stereo installation instruction

1. Pry the radio trim panel and air vent with a plastic removal tool.

Pry the radio trim panel and air vent with a plastic removal tool

1-1

2. Disconnect the connectors at the back of the trim panel.

3. There are totally six screws that are holding the radio and the radio bracket. Remove them with a screwdriver.

There are totally six screws that are holding the radio and the radio bracket. Remove them with a screwdriver

4. Take out the original car radio gently.

Take out the original car radio gently

5. Disconnect the connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

Wish you succeed in the car stereo installation with the help of the above installation instruction. If you have any questions, you can seek help from your dealer or ask a professional for help.

However, before the installation, please confirm that your new car stereo can work well in your car. If the stereo is not suitable enough, you’d better quit it and select another one. Here comes an amazing 2012 2013 2014 Subaru Forester car stereo from Seicane for your reference. Please click the following link:

http://www.seicane.com/9-inch-android-bluetooth-radio-for-2012-2013-2014-subaru-forester-with-3g-wifi-gps-navigation-system-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-video-3g-wifi-capacitive-touch-screen-s081988

Coming with the latest Android 6.0 operation system, this powerful 2012 2013 2014 Subaru Forester car stereo is also compatible with a wide range of practical and entertainment features, which can help you gain a brand new driving experience. For the practical functions, I’d like to take Bluetooth connectivity as a reference. Under the Bluetooth technology, you can easily and freely get access to hands-free calls as well as enjoy Bluetooth music streaming from your phone music playlists without keeping your hands off the steering wheel. While as for its entertainment features, you can enjoy your favorite music, videos, FM/AM radio, TV programs, etc in car to relax both you and your passenger. Hurry up to purchase this stereo if you like it!

12Jan 2017

How to Upgrade a 2009-2014 Toyota ALPHARD Audio Head Unit with Digital TV DVD Player in a Quick Way

eric ⋅ Leave a Comment

2009-2014 Toyota ALPHARD Audio Head Unit after installation

There is a common phenomenon that more car owners tend to upgrade a head unit integrated with both practical and entertainment features when they want to enjoy more convenience and enjoyment in car and improve their driving experience. Actually as one of them, you can install a new head unit following a correct installation guide. The following is an installation guide for 2009-2014 Toyota ALPHARD head unit. If you own the same dashboard, you can carefully read it to get some help.

2009-2014 Toyota ALPHARD Audio Head Unit after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tool for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2009-2014 Toyota ALPHARD head unit installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane head unit into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new head unit.

Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new head unit

Wish the above installation guide can help with your 2009-2014 Toyota ALPHARD head unit installation to some extent. Before the installation, please confirm that you understand every detailed step. If there is any question, you can turn to your dealer or a professional for help. Besides, if you are still searching for a compatible head unit for your car, I’d like to share a great 2009-2014 Toyota ALPHARD head unit from Seicane with you. You may click the link below for more details.

http://www.seicane.com/9-inch-2009-2014-toyota-alphard-android-radio-gps-navigation-system-with-3g-wifi-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-steering-wheel-control-usb-sd-bluetooth-hd-1080p-video-s082711

This 2009-2014 Toyota ALPHARD head unit from Seicane, based on the most up-to-date Android 6.0 operation system and a R16 1.6 GHz Quad-core CPU can greatly facilitate your operation. With a super large 9 inch 1024×600 HD multi-touch smart screen, you are able to enjoy the best display effect when you are playing TV programs, videos, movies, etc as well as the visual field of the road ahead. Besides, as for the other various functions of this unit, you can easily control GPS navigation system, CD/DVD player, Bluetooth connectivity, USB connection, etc. Just enjoy your trip with this device installed in your beloved car. Good luck to you!

09Jan 2017

The Powerful Trick on 2012 2013 2014 Toyota CAMRY Radio Removal and Installation to Fix Touch Screen Not Working

eric ⋅ Leave a Comment

2012 2013 2014 Toyota CAMRY Radio after installation

When you get bored and tired due to the long-time staying in car, it is suggested that you consider replacing your single functional factory radio with a brand new multifunctional car radio to refresh you. As the car radio installation process is not difficult, you can finish it by following a correct installation guide step by step. The following 2012 2013 2014 Toyota CAMRY car radio installation guide is provided for your reference.

2012 2013 2014 Toyota CAMRY Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2012 2013 2014 Toyota CAMRY car radio installation guide

1. Remove the lower dashboard trim panels and the upper air conditioning vents.

Remove the lower dashboard trim panels and the upper air conditioning vents

1-1

1-2

2. Gently pry the upper dashboard housing from the radio’s trim bazel using either an automotive trim tool or your hands.

Gently pry the upper dashboard housing from the radio’s trim bazel using either an automotive trim tool or your hands

3. After the upper dashboard housing has been disconnected, remove the two upper & two lower radio mounting screws from the dashboard.

After the upper dashboard housing has been disconnected, remove the two upper & two lower radio mounting screws from the dashboard

3-1

3-2

3-3

4. Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside.

Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside

4-1

5. Disconnect the connectors at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

Wish you can get some help from the above installation guide for a 2012 2013 2014 Toyota CAMRY car radio. If you confront with any problems you cannot solve, you can turn to your dealer or a professional for help. And if you are still searching online for a suitable car radio, I’d like to recommend a multifunctional 2012 2013 2014 Toyota CAMRY car radio from Seicane to you. You may check the link for more details.

http://www.seicane.com/10-2-inch-cheap-2012-2013-2014-toyota-camry-android-radio-gps-navigation-system-with-3g-wifi-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-steering-wheel-control-usb-sd-bluetooth-hd-1080p-video-s082689

This smart car radio for 2012 2013 2014 Toyota CAMRY, based on the most advanced Android 6.0 operation system and a powerful R16 1.6 GHz Quad-core CPU, greatly makes your operation smoother and faster. With the built-in 3D GPS Navigation System, you are able to locate accurately and quickly to find your ways to your ideal destinations through turn-by-turn directions and voice prompts. Besides, you can freely play your favorite music or videos in your car, which adds more fun to your tedious journey. Wish you like it and good luck to you!

06Jan 2017

How to Upgrade a 2002-2008 Mercedes-Benz E Class W211 E200 E220 E240 E270 E280 Stereo Audio Sat Nav Speaker

eric ⋅ Leave a Comment

2002-2008 Mercedes-Benz E Class W211 E200 E220 E240 E270 E280 Stereo Audio after installation

It is undoubtedly correct when you want to make your car more featured, what you need to do is to have the replacement of your factory radio. With a correct installation guide and some related experience, you can also try to upgrade your factory radio by yourself. Now I would like to introduce a detailed 2002-2008 Mercedes-Benz E Class W211 E200 E220 E240 E270 E280 Stereo Audio installation guide from Seicane with you. Wish you can get some inspiration from it.

2002-2008 Mercedes-Benz E Class W211 E200 E220 E240 E270 E280 Stereo Audio after installation

Here are some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002-2008 Mercedes-Benz E Class W211 E200 E220 E240 E270 E280 car stereo installation guide

1. The original car radio.

The original car radio

2. Turn on key, DO NOT turn on engine, move shifter lever so you can move trim, make sure car is not moving.

Turn on key, DO NOT turn on engine, move shifter lever so you can move trim, make sure car is not moving

3. Push and remove the extra assembly.

Push and remove the extra assembly

3-1

4. Carefully lift front of shifter trim, pull forward, then lift back of trim.

Carefully lift front of shifter trim, pull forward, then lift back of trim

5. Remove two screws holding the panel.

Remove two screws holding the panel

5-1

6. Remove the panel.

Remove the panel

7. Remove two screws that fixed the original radio on the dashboard.

Remove two screws that fixed the original radio on the dashboard

7-1

8. Pull out the original car radio gently, then unplug the connectors at the back of the car radio.

Pull out the original car radio gently, then unplug the connectors at the back of the car radio

9. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

10. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

11. Connect the Seicane car stereo to your original stereo’s plugs.

12. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car stereo into the dash.

14. Put everything into their original place. All the installation is done.

Before the installation, please make clear every detailed step. If you have anything cannot understand, you’d better seek help from your dealer or a professional. Besides, it is very essential for you to own a suitable car stereo. If you don’t know how to select it, I’d like to recommend a 2002-2008 Mercedes-Benz E Class W211 E200 E220 E240 E270 E280 Stereo Audio from Seicane to you. The link is as following, you may check it.

http://www.seicane.com/9-inch-2002-2008-mercedes-benz-e-class-e200-e220-e240-e270-e280-android-capacitive-touch-screen-radio-gps-navigation-system-with-bluetooth-tpms-dvr-obd-ii-rear-camera-aux-usb-sd-3g-wifi-steering-wheel-control-video-s085991

Equipped with a large 9 inch HD 1280*480 multi-touch screen, this car stereo provides you with an excellent experience to enjoy the simple operation and clear display in car. Let me typically take the GPS function as an example. You can be guided to anywhere you want to go when you press the “GPS” button and make full use of the turn-by-turn directions and voice prompts. Additionally, various entertainment options are supported to promise you of a trip filled in joyfulness. Wish you like it and good luck to you!

04Jan 2017

The Great Instruction on a 2017 Toyota Corolla (LHD) Stereo Removal and Installation to fix Radio Speakers CD Player not Working

eric ⋅ Leave a Comment

2017 Toyota Corolla (LHD) Stereo after installation

What do you think is the effective way to make you have great fun on all trips? In my opinion, to install a car stereo can help you realize your dream. And it is not difficult to install a new car stereo on your own. With some installation experience and a correct guide, you can easily achieve the installation. Here shows a detailed 2017 Toyota Corolla (LHD) car stereo installation instruction from Seicane. If you also have the same dashboard, you can follow the instruction step by step.

2017 Toyota Corolla (LHD) Stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2017 Toyota Corolla (LHD) car stereo installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

That’s all about how to removal the factory radio and install the new car radio for 2017 Toyota Corolla (LHD). If you have any questions, you can consult your dealer or seek help from a professional. To make sure your upgrading is successful, you need to buy a suitable car stereo for your car. If you don’t know how to pick a suitable car stereo, you can refer to this up-to-date Seicane 2017 Toyota Corolla (LHD) car stereo.

http://www.seicane.com/2017-toyota-corolla-lhd-left-driving-9-inch-android-radio-gps-navigation-system-bluetooth-hd-1024-600-touch-screen-wifi-mirror-link-16g-flash-quad-core-cpu-s301185

Based on the advanced Android 5.0.1 operation system and a powerful 1.6GHz A9 Quad-core CPU, the performance of this 2017 Toyota Corolla (LHD) car stereo to operate and process the database is greatly improved. With the help of the high-end 3D GPS navigation system, you are able to be provided with the best route option to reach your destinations without mistakes. By linking your Bluetooth-enabled mobile phones with this stereo, you can freely get access to hands-free calls and streaming music keeping your hands on the steering wheel control for a safe driving. Wish you like it and good luck to you!

03Jan 2017

The Top Tutorial on a 2000-2015 VW Volkswagen Crafter GPS Bluetooth Radio Upgrade with Stereo Speaker

eric ⋅ Leave a Comment

2000-2015 VW Volkswagen Crafter GPS Bluetooth Radio after installation

For some car owners, it is just an easy thing to replace a factory radio, which just consists of the removal of the old radio and the installation of the new radio. If you have a plan to upgrade your factory radio, it is highly suggested that you should find a detailed installation guide to help you. Here I would like to share a step-by-step installation guide about a 2000-2015 VW Volkswagen Crafter GPS Bluetooth Radio from Seicane with you. If you also have the same or similar dashboard, you can take it as a reference.

2000-2015 VW Volkswagen Crafter GPS Bluetooth Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000-2015 VW Volkswagen Crafter car radio installation guide

1. The original car radio.

The original car radio

2. Remove the air vent with a plastic removal tool.

Remove the air vent with a plastic removal tool

3. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

4. Unscrew four screws that are holding the radio on the dashboard.

Unscrew four screws that are holding the radio on the dashboard

4-1

5. Take out the original car radio.

Take out the original car radio

6. Disconnect the connectors at the back of the radio.

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original stereo’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

Above is the installation guide for a 2000-2015 VW Volkswagen Crafter GPS Bluetooth Radio. If you meet any difficulties you cannot overcome independently, it is highly suggested that you should consult your dealer or ask a professional for help. But if you haven’t got a suitable radio yet, I’d like to recommend a wonderful 2000-2015 VW Volkswagen Crafter GPS Bluetooth Radio from Seicane to you. For more details, please click:

http://www.seicane.com/oem-9-inch-android-car-radio-replacement-for-2000-2015-vw-volkswagen-crafter-bluetooth-gps-navigation-system-car-stereo-with-3g-wifi-mirror-link-hd-1080p-video-s301183

This remarkable car radio can be one of your best choices to replace your factory radio. Thanks to the features of turn-by-turn direction and voice prompts provided by the strong 3D GPS navigation system, you can be guided to anywhere you like to go accurately. Besides, with the Bluetooth module built in this radio, you are able to freely connect your Bluetooth-enabled mobile phone with this radio to have hands-free calls as well as enjoy streaming music to keep you safe and relaxed all the way. Wish you have a good time accompanied by this car radio. Good luck to you!

Monthly Archives: January 2017

How to Upgrade a 2000-2009 VW Volkswagen Polo Pure Stereo with Bluetooth Audio Music System

Classic Tips on a 2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum Radio Removal and Installation

A Simple Tutorial on a 2009-2013 TOYOTA AVENSIS Radio Removal and Installation with an USB Port GPS Navigation System

How to Install a new 2012 2013 2014 Subaru Forester Stereo with Speaker Subwoofer

How to Upgrade a 2009-2014 Toyota ALPHARD Audio Head Unit with Digital TV DVD Player in a Quick Way

The Powerful Trick on 2012 2013 2014 Toyota CAMRY Radio Removal and Installation to Fix Touch Screen Not Working

How to Upgrade a 2002-2008 Mercedes-Benz E Class W211 E200 E220 E240 E270 E280 Stereo Audio Sat Nav Speaker

The Great Instruction on a 2017 Toyota Corolla (LHD) Stereo Removal and Installation to fix Radio Speakers CD Player not Working

The Top Tutorial on a 2000-2015 VW Volkswagen Crafter GPS Bluetooth Radio Upgrade with Stereo Speaker

Recent Posts

Views

Recent Comments

Archives

Subscribe

Categories

Meta