2017 Februarycar dvd blog

27Feb 2017

How to upgrade 2005 2006 2007 Saturn Relay car stereo with DVD Player HD Touch Screen Bluetooth Backup Camera

2005 2006 2007 Saturn Relay car stereo car stereo after installation

You don’t need to over worry whether the installation process of a new car stereo is complicated or not since most car stereo are with plug and play feature and easy to install. So you can also try to finish the whole installation process if you have installed a car stereo before and have a correct installation guide. This article mainly introduces a detailed 2005 2006 2007 Saturn Relay car stereo car stereo installation instruction. If you have a 2005 2006 2007 Saturn Relay, you might as well take this instruction as a reference.

2005 2006 2007 Saturn Relay car stereo car stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 Saturn Relay car stereo installation instruction

1. Move the shift lever down to the lowest position. So you can have enough room to get access to the radio.

Move the shift lever down to the lowest position. So you can have enough room to get access to the radio

1-1

2. Use a pry tool to pop off the radio panel.

Use a pry tool to pop off the radio panel

3. Remove connectors at the back of the radio panel and set the panel aside.

Remove connectors at the back of the radio panel and set the panel aside

4. There are four screws holding the radio. Use a screwdriver to remove these four screws.

There are four screws holding the radio. Use a screwdriver to remove these four screws

5. Pull out the original radio.

Pull out the original radio

6. Disconnect the connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original car radio’s plugs.

10. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. If the new Seicane car stereo works well, put it into the dash.

12. Put everything into their original place, and all the installation is done.

To deal with problems you meet in the installation, please feel free to consult your dealer for useful advice or ask for help from a professional. To avoid unnecessary damage to both your stereo and your car, you’d better go to a car stereo upgrade center to install your new car stereo.

Besides, if you don’t know how to pick a suitable 2005 2006 2007 Saturn Relay car stereo, I would like to share a great 2005 2006 2007 Saturn Relay car stereo from Seicane. Here comes the link, please click:

http://www.seicane.com/android-radio-gps-navigation-system-2005-2006-2007-saturn-relay-with-dvd-player-hd-touch-screen-bluetooth-backup-camera-steering-wheel-control-1080p-wifi-tv-s018724

This unit adopts the stable Android 5.1.1 operation system and a powerful Quad-core CPU processor to enhance its capabilities and performance. It comes with a wide range of features to meet your practical and entertainment needs, which can further help you gain great convenience in car and greatly improve your driving experience. Features in diversity are supported, including GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, DVD player, FM/AM radio, USB/ SD connection, etc.

Even you have to stay in your car for a long time, you won’t easily get tired or bored because of these different practical and entertainment features. Wish you have an unforgettable driving experience accompanied by this stereo!

23Feb 2017

How to install a 2005-2008 Porsche 911 997 gps bluetooth dvd car stereo and fix power on and no sound problem

eric ⋅ Leave a Comment

2005-2008 Porsche 911 997 gps bluetooth dvd car stereo after installation

First of all, I’d like to show you the following picture which is a 2005-2008 Porsche 911 997 gps bluetooth dvd car stereo from Seicane after installation. Are you also desired to have such a remarkable car stereo installed in your beloved Porsche 911 997 of years from 2005 to 2008? If your answer is “yes”, you must be interested in this article, which not only introduces how to install such a car stereo but also how to fix power on and no sound problem.

2005-2008 Porsche 911 997 gps bluetooth dvd car stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2005-2008 Porsche 911 997 car stereo installation steps

1. The original radio before the upgrade.

The original radio before the upgrade

2. Remove the screw on the carpet which is on the side of the radio with a screwdriver, and then the carpet comes out.

Remove the screw on the carpet which is on the side of the radio with a screwdriver, and then the carpet comes out

2-1

3. Remove the other two screws which hold the panel on one side, then slide out the panel. After that, do the same thing on the other side.

Remove the other two screws which hold the panel on one side, then slide out the panel. After that, do the same thing on the other side

3-1

4. Remove two locking screws on each side of the radio with a screwdriver.

Remove two locking screws on each side of the radio with a screwdriver

5. Carefully take the radio out of the dashboard.

Carefully take the radio out of the dashboard

6. Disconnect the connectors at the back of the radio.

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs.

10. Gently put the new Seicane radio back into the dash.

11. Turn on the new Seicane radio and have a comprehensive test if everything works well.

12. After checking the new Seicane radio works well, install four screws holding the radio on both sides, and then install four screws which hold the panels on both sides of the radio. At last, put the carpet back into its original place and install the screw which holds the carpet on the cover.

That’s about the installation steps of a 2005-2008 Porsche 911 997 car stereo from Seicane. Now let’s come to the part of power on and no sound problem.

To power on the unit, please follow the steps below:

1) There are 2 power cables, include cable2 and cable11.

2) Firstly please find out your original car radio’s power cable. Then please connect # 2 power cable’s arrowed plug to your original car radio’s power cable plug , and connect the other end of #2 power cable’s to the unit as below and see whether the unit will power on or not.

3) If the unit is not powered on, then please try #11 power cable to power on the unit.

Note: The Canbus box needs to connect to #2 power cable or #11 power cable’s white plug.

2.After this unit powers on, there will be no sound. Could you please follow the below steps to install the decoder：

1). For the optic fiber decoder, please connect the black wire to your car’s GND wire, yellow wire to your car’s B+ wire, and red wire to your car’s ACC wire.

2). For the white plug and the red plug on the decoder, please simply connect them to our unit’s RCA plug as in the above picture.

3) Please click the arrowed part, and then you will take the circled plug out of the decoder. For your original car’s optical fiber cable, please connect it to the circled plug first, and then plug it back to the optic fiber decoder box.

3. For other parts, please refer to the following diagram.

To purchase such an excellent all-in-one stereo from Seicane for your 2005-2008 Porsche 911 997, you might click:

http://www.seicane.com/android-gps-navigation-system-for-2005-2006-2007-2008-porsche-911-997-with-dvd-player-touch-screen-radio-bluetooth-wifi-tv-ipod-backup-camera-steering-wheel-control-hd-1080p-video-usb-sd-s018815

This Porsche 911 997 gps bluetooth dvd car stereo for year 2005 2006, 2007 and 2008 is ungraded with the top configuration which can meet almost your needs in car. It applies the stable Android 5.1.1 operation system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor to enable you to experience faster boot and smoother operation.

With this unit, thanks to its practical and entertainment features, you are able to build a more convenient, comfortable and enjoyable car interior environment as well as have a more wonderful driving experience.

What are you waiting for? If you like this unit, don’t forget to add it to your cart right now!

22Feb 2017

Useful Instruction on a 2007-2013 Alfa Romeo GT gps dvd car radio installation

eric ⋅ Leave a Comment

2007-2013 Alfa Romeo GT car radio after installation

With the development of technology, at present most car radios are plug and play, so you don’t have to modify or cut any wires in your car during the installation. The installation process of a new radio is not so complicated that you can also try to install a new car radio by yourself under the guidance of a correct car radio installation instruction. The following step-by-step instruction about the installation of a 2007-2013 Alfa Romeo GT gps dvd car radio is provided for you as a reference if you plan to replace your factory radio on your own.

2007-2013 Alfa Romeo GT car radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2013 Alfa Romeo GT car radio installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

If you have any problems, we suggest you ask a professional for help. Besides, if you don’t have an ideal radio to replace your factory radio, you can refer to a 2007-2013 Alfa Romeo GT gps dvd car radio from Seicane. For more details, please click:

http://www.seicane.com/alfa-romeo-gt-dvd-player-with-gps-navigation-radio-bluetooth-ipod-srd-8805-1

Loaded with the intelligent WinCE6.0 operation system and the newest 800MHz ARM11 processor, this unit can greatly enhance its capacities and performance to be the best replacement for your factory radio in 2007-2013 Alfa Romeo GT.

You will be provided with numerous advanced features, including the latest 3D GPS navigation, Bluetooth hands-free calls, Bluetooth streaming music, radio, RDS, USB/SD connection, steering wheel control, etc.

This unit comes with a 6.2 inch 16:9 800*480 digital HD TFT LCD touch screen, so you are able to enjoy the best display effect when you utilize it to play TV programs, videos, movies, etc. And you will also have a better view of the road ahead.

With the built in Bluetooth technology, you are allowed to have hands-free calls and stream music straight from your Bluetooth-enabled mobile phone. Please do remember to add this unit to your cart right now if you like it!

21Feb 2017

How to remove a 2005-2013 Alfa Romeo 159 factory radio to install a new aftermarket stereo with GPS navigation Bluetooth radio tuner

eric ⋅ Leave a Comment

2005-2013 Alfa Romeo 159 factory radio after installation

More car owners who spend a lot of time in cars are trying to replace the factory radio with a new aftermarket car stereo for they want to create a more convenient, comfortable and relaxing car environment as well as a more wonderful driving experience. Since most of car stereos are plug-and-play now, you can try to install the new stereo under the guidance of a correct instruction. Today I’d like to share a 2005-2013 Alfa Romeo 159 car stereo installation instruction with you. If you have the same dashboard, you might refer to it when you are going to have the stereo replacement.

2005-2013 Alfa Romeo 159 factory radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2013 Alfa Romeo 159 car stereo installation instruction

1. Firstly please make extractors or directly buy some for help with your removal.

Firstly please make extractors or directly buy some for help with your removal

2. There are four slots in the original car radio. Insert these extractors into the holes of the radio.

There are four slots in the original car radio. Insert these extractors into the holes of the radio

2-1

3. Push the extractors away and pull the original radio firmly.

Push the extractors away and pull the original radio firmly

3-1

4. Remove aerial and connectors from the back of the radio.

5. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

6. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

7. Connect the Seicane car stereo to your original car radio’s plugs.

8. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. If everything is OK, make everything return to the original place.

Don’t over worry if you encounter any problems during the installation. You’re welcome to contact your dealer or seek help from a professional mechanic. If you are happened to search online for a suitable stereo for your 2005-2013 Alfa Romeo 159 car stereo, you might as well click the following link from Seicane which is a remarkable 2005-2013 Alfa Romeo 159 car stereo with GPS, dvd player & Bluetooth.

http://www.seicane.com/alfa-romeo-159-dvd-player-with-gps-navigation-radio-bluetooth-ipod-srd-8804-1

This amazing unit for a 2005-2013 Alfa Romeo 159 car stereo is totally plug and play, so you don’t have to worry if the installation is too complicated.

This stereo is upgraded to the stable WinCE6.0 operation system and 800MHz ARM11 processor to enhance its configuration and performance.

Different features can meet your different needs in car. Here I’d like to introduce Bluetooth connectivity and radio function to you.

With the BC6 Bluetooth module, this stereo enables you to make it sync with your Bluetooth-enabled mobile phone, so you can dial, receive, reject and mute hands-free calls as well as enjoy music streaming from your phone. Coming with a built-in radio, this stereo can automatically or manually search the multiple frequencies, so you can listen to your favorite stations for the global news and entertainment radio shows.

Do not miss this multifunctional 2005-2013 Alfa Romeo 159 car stereo if you like it!

20Feb 2017

How to Upgrade a 2003-2006 Jeep Wrangler Sound System with Stereo Radio Navigation

eric ⋅ Leave a Comment

2003-2006 Jeep Wrangler Sound System after installation

If you are not satisfied with your factory radio due to its simple and old features, you can upgrade this basic stock stereo so as to add the latest features such as GPS function, Bluetooth, USB/ SD connection, etc. If you are an owner of a 2003-2006 Jeep Wrangler , here I would like to recommend a 2003-2006 Jeep Wrangler car stereo from Seicane to you. It is easy to install and use as well as integrates a wide range of modern features. The following is a step-by-step installation instruction for a 2003-2006 Jeep Wrangler Sound System, which can be taken as your reference.

2003-2006 Jeep Wrangler Sound System after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2003-2006 Jeep Wrangler car stereo installation instruction

1. Remove the trim piece above cup holder with a lever.

Remove the trim piece above cup holder with a lever

2. Remove 2 screws behind the trim piece.

Remove 2 screws behind the trim piece

3. Gently pry around the side of trim panel with the lever and then remove the trim panel.

Gently pry around the side of trim panel with the lever and then remove the trim panel

4. Remove 4 screws which hold the factory radio in place.

Remove 4 screws which hold the factory radio in place

5. Take out the factory radio.

Take out the factory radio

6. Disconnect the smaller harness on the behind of the factory radio.

Disconnect the smaller harness on the behind of the factory radio

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original car radio’s plugs.

10. Install four screws and trim panel.

11. Install 2 screws behind the trim piece and the trim piece.

12. Turn on the new stereo and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

Above is the whole removal and installation process for a 2003-2006 Jeep Wrangler Sound System. If you have any difficulties understanding the above steps, please feel free to communicate with a professional technician or ask an experienced person for help. To purchase the amazing 2003-2006 Jeep Wrangler Sound System from Seicane I recommend to you, please check out the following link:

http://www.seicane.com/android-gps-radio-touchscreen-for-2003-2006-jeep-wrangler-with-navigation-system-dvd-player-dvr-wifi-obd2-bluetooth-steering-wheel-control-mirror-link-quad-core-cpu-s125002

With this unit in your car, your different needs can be met since it is coming with a variety of features including GPS function, Bluetooth hands-free calls, Bluetooth music, FM/AM radio, CD/DVD player, USB/SD connection, etc.

As for its practical features, firstly I’d like to take the 3D GPS navigation as an example. The turn-by-turn directions and voice prompts provided by the 3D navigation will accurately guide you to any unfamiliar directions even you are not good at identifying directions.

While as for the optional features, you can add Car DVR, Backup camera, OBD2, etc to this unit according to your preference and needs. For instance, a backup camera can be used for automatically switching to the parking image while reversing, which is very helpful for your parking.

Don’t hesitate to add this 2003-2006 Jeep Wrangler Sound System to your cart and wish you enjoy your driving from now on!

16Feb 2017

How to Replace a 1999-2004 Jeep Grand Cherokee Radio with GPS Audio System by Yourself

eric ⋅ Leave a Comment

1999-2004 Jeep Grand Cherokee radio after installation

To upgrade your car, it is a wise choice for you to upgrade your factory radio with an aftermarket multifunctional radio. A new radio can improve your interior environment with its attractive appearance and can provide you with a brand new driving experience with its remarkable features. With a detailed installation guide, you can even install a new radio by yourself. Here shows you an image of a Seicane1999-2004 Jeep Grand Cherokee radio after installation, if you have the same dashboard, you can take the following installation guide as a reference.

1999-2004 Jeep Grand Cherokee radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

1999-2004 Jeep Grand Cherokee radio installation guide

1. Remove the trim piece above cup holder with a lever.

Remove the trim piece above cup holder with a lever

2. Remove 2 screws behind the trim piece.

Remove 2 screws behind the trim piece

3. Gently pry around the side of trim panel with the lever and then remove the trim panel.

Gently pry around the side of trim panel with the lever and then remove the trim panel

4. Remove 4 screws which holds the factory radio in place.

Remove 4 screws which holds the factory radio in place

5. Take out the factory radio.

Take out the factory radio

6. Disconnect the smaller harness on the behind of the factory radio.

Disconnect the smaller harness on the behind of the factory radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs.

10. Install four screws and trim panel.

11. Install 2 screws behind the trim piece and the trim piece.

12. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

Wish the above installation guide can be helpful for your upgrading. If there are any questions, we suggest you turn to your dealer or a professional for help. If you don’t have a suitable car radio for your beloved car, I’d like to recommend an intelligent 1999-2004 Jeep Grand Cherokee radio from Seicane to you.

http://www.seicane.com/android-radio-bluetooth-touchscreen-for-1999-2004-jeep-grand-cherokee-with-gps-navigation-system-dvd-player-mirror-link-wifi-backup-camera-steering-wheel-control-s125002

This unit is equipped with the intelligent Android 5.1.1 version operation system, a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor, 16GB flash, and 1GB RAM. So you are able to utilize the latest hardware and software for car radios.

Thanks to the built-in GPS navigation, you can easily locate and navigate to any places you would like to go to through the turn-by-turn direction and voice prompts. Additionally, hands-free calls and streaming music are both available for you as long as you wirelessly connect this unit with your Bluetooth-enabled devices through the advanced Bluetooth technology.

Just take this wonderful 1999-2004 Jeep Grand Cherokee radio on all your trips, and you will embrace an exciting and brand new driving experience from now on!

15Feb 2017

How to Remove a 2010-2013 Opel Astra Radio to Install a Bluetooth CD Stereo in an Easy Way

eric ⋅ Leave a Comment

2010-2013 Opel Astra Radio after installation

An ideal stereo should be compatible with a wide range of practical and entertainment features to meet all your needs in car. If your original radio is not up-to-date enough, you can upgrade it. If you are an owner of a Opel Astra of years from 2010, 2011, 2012 to 2013, you can consider install a multifunctional stereo to replace your factory radio. And the following is a detailed 2010 2011 2012 2013 Opel Astra stereo installation instruction. Please follow it step by step during your installation process.

2010-2013 Opel Astra Radio after installation

Please pay attention to the following notice before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2010-2013 Opel Astra stereo installation instruction

Step 1: Remove the panel as the picture shows with a plastic tool.

Remove the panel as the picture shows with a plastic tool

Step 2: Pull out the shifter cover.

Pull out the shifter cover

Step 3: Remove two screws of each side with a Phillips screwdriver.

Remove two screws of each side with a Phillips screwdriver

Step 4: Remove the whole trim panel and set it aside.

Remove the whole trim panel and set it aside

Step 5: Pry two chips at each side of the center control.

Pry two chips at each side of the center control

Step 6: Remove eight 10mm bolts holding the center control panel in place.

Remove eight 10mm bolts holding the center control panel in place

Step 7: Pull out the center control panel.

Pull out the center control panel

Step 8: Unplug the connectors behind it.

Unplug the connectors behind it

Step 9: Remove two 10mm bolts.

Remove two 10mm bolts

Step 10: Pull out the factory radio and unplug the connectors behind it.

Pull out the factory radio and unplug the connectors behind it

Step 11: Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Step 12: Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Step 13: Connect the Seicane car stereo to your original car radio’s plugs.

Step 14: Put the new Seicane car stereo into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

Step 15: If everything is OK, firm bolts and screws then make trim panel back on your new Seicane car stereo.

Above is the whole installation process for a 2010 2011 2012 2013 Opel Astra stereo. Before the installation, please make clear every detailed step. If you cannot totally understand, please feel free to seek advice from your dealer or turn to a professional for help.

http://www.seicane.com/seicane-s127882-16g-android-gps-dvd-in-dash-radio-system-for-2010-2013-opel-astra-with-mirror-link-obd2-3g-wifi-bluetooth-backup-camera-hd-1024-600-multi-touch-capacitive-screen-s127882

This Seicane 2010 2011 2012 2013 Opel Astra stereo at a reasonable price, runs with the stable Android 4.4.4 operation, quad-core 1.6 GHz, 16GB flash, and 2GB RAM. This unit is multi-touch screen operational by your finger, and with a 7 inch digital HD screen with 1024*600 resolution, you are able to experience its smooth operation, high sensitivity and abundant interaction for the better view of your road ahead.

Bluetooth hands-free phone calls and Bluetooth streaming music are both available for you as long as you make this unit wirelessly sync with your Bluetooth-enabled mobile phone.

Because of the USB and SD connection, this unit allows for audio and video play, picture view, E-book reading etc from USB or a SD card.

Don’t hesitate to take it home and make it become your loyal road companion.

13Feb 2017

How to Replace a 2006-2009 Ford Fusion 4-door Sedan Radio with Audio Navigation Sound System

eric ⋅ Leave a Comment

2006-2009 Ford Fusion 4-door Sedan stereo after installation

You must want every part in your car is of high performance so that you can have a perfect in-car life. However, some car owners may discover that a factory radio comes with few features, which can’t meet most of needs. In that case, to replace the factory radio with a new aftermarket radio is the best idea. If you are fed up with your factory radio, you can also achieve the new radio installation by yourself. Here comes a detailed 2006-2009 Ford Fusion 4-door Sedan car radio installation guide for your reference.

2006-2009 Ford Fusion 4-door Sedan stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2006-2009 Ford Fusion 4-door Sedan radio installation steps

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane radio.

Check all the accessories for the new Seicane radio

Step 10: Connect the harnesses to the back of the new Seicane radio.

Connect the harnesses to the back of the new Seicane radio

Step 11: Connect the Seicane radio to your original car radio’s plugs, and put the new Seicane radio into the dash.

Step 12: Turn on the new Seicane radio and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

Wish the above installation guide can be helpful for you to upgrade your factory radio. It is quite normal if you encounter any problems during the installation process. To solve problems, you can turn to your dealer or a professional for help. Besides, if you haven’t chosen a suitable car radio yet, I’d like to share the following link with you which is an amazing 2006-2009 Ford Fusion 4-door Sedan car radio from Seicane.

http://www.seicane.com/android-2006-2009-ford-fusion-4-door-sedan-pure-dvd-gps-in-dash-radio-system-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera-s127302

This Seicane 2006-2009 Ford Fusion 4-door Sedan car radio comes with higher configurations and performance for you to upgrade your factory radio, which include a stable Android 5.1.1 operation system, a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor and a 16 GB INand Flash. This unit is equipped with the worldwide real-time GPS navigation system in high precision.

It provides you with 3D street view, landmark building display, turn-by-turn directions, voice prompts, etc, which enables you to find your ways to your destinations. What’s more, you can utilize its built-in Bluetooth module to wirelessly pair with your enabled mobile phone to make, receive or reject hands-free calls as well as stream audio to keep you safe and enjoyable.

Just add it to your cart and enjoy your driving from now on!

10Feb 2017

Perfect Guide on a 2002-2010 Chrysler Sebring PT Cruiser Stereo Removal and Installation with an Aftermarket Radio GPS System

eric ⋅ Leave a Comment

2002-2010 Chrysler Sebring PT Cruiser car stereo after installation

How hard is it to install a new car stereo in your beloved car? As a matter of fact, to install a new car stereo just takes several simple steps. Before the installation, what you have to do is to remove the original car radio. This article is mainly about how to remove and install a 2002-2010 Chrysler Sebring PT Cruiser car stereo. If you happen to have the same dashboard or similar dashboard, it suggested that you carefully read this article.

2002-2010 Chrysler Sebring PT Cruiser car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2002-2010 Chrysler Sebring PT Cruiser car stereo installation steps

1. Loosen the trim panel with a lever.

Loosen the trim panel with a lever

2. Take the panel off the dash and disconnect the wires from the car.

Take the panel off the dash and disconnect the wires from the car

2-1

3. Remove the four screws which are holding the unit with a screwdriver.

Remove the four screws which are holding the unit with a screwdriver

4. Take out the unit and disconnect the wire harness at the back of the unit.

Take out the unit and disconnect the wire harness at the back of the unit

4-1

5. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

6. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

7. Connect the Seicane car stereo to your original car radio’s plugs.

Connect the Seicane car stereo to your original car radio’s plugs

8. Put the new Seicane car stereo into the dash.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put trim panel back on your new Seicane car stereo after the normal test.

That’s all about the basic steps for a 2002-2010 Chrysler Sebring PT Cruiser car stereo removal and installation. If you cannot solve any problems independently, you’d better contact with your dealer or ask for a professional for help. Besides, it is especially vital for you to have a right replacement for your car. Here I’d like to share a great 2002-2010 Chrysler Sebring PT Cruiser car stereo from Seicane with your as a reference.

http://www.seicane.com/seicane-s09206-android-radio-gps-navigation-system-for-2002-2010-chrysler-sebring-pt-cruiser-with-hd-touch-screen-dvd-player-dvr-rearview-camera-tv-video-wifi-steering-wheel-control-usb-sd-mirror-link-obd2-bluetooth

Upgraded to a stable Android 4.4.4 operating system and a powerful RK PX3 1.66GMHZ quad-core processor, this Seicane 2002-2010 Chrysler Sebring PT Cruiser car stereo runs faster and smoother as well as has a better performance than ever.

With the assistance of the updated GPS, you are provided with turn-by-turn directions with the latest maps. You can gain the best or shortest route to get to your destinations accurately.

Thanks to built-in Bluetooth connectivity, you are able to sync with your Bluetooth-enabled mobile phone for hands-free calls and music streaming to make a safe and pleasant trip all the time.

What are you waiting for now? With a competitive price, it’s time to take this Seicane 2002-2010 Chrysler Sebring PT Cruiser car stereo right now!

09Feb 2017

How to Upgrade a 2002-2007 Dodge Intrepid Magnum Neon Aftermarket Stereo Radio CD Player

eric ⋅ Leave a Comment

2002-2007 Dodge Intrepid Magnum Neon car stereo after installation

In the new year of 2017, what measures will you take to take your driving experience to next level? If you own a 2002-2007 Dodge Intrepid Magnum Neon, you can upgrade and replace the factory radio with single function with a new modern looking 2002-2007 Dodge Intrepid Magnum Neon car stereo now. A straightforward car stereo installation guide for a 2002 2003 2004 2005 2006 2007 Dodge Intrepid Magnum Neon is as follows, which can be taken as a reference.

2002-2007 Dodge Intrepid Magnum Neon car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2002-2007 Dodge Intrepid Magnum Neon car stereo installation guide

1. Loosen the trim panel with a lever.

Loosen the trim panel with a lever

2. Take the panel off the dash and disconnect the wires from the car.

Take the panel off the dash and disconnect the wires from the car

2-1

3. Remove the four screws which are holding the unit with a screwdriver.

Remove the four screws which are holding the unit with a screwdriver

4. Take out the unit and disconnect the wire harness at the back of the unit.

Take out the unit and disconnect the wire harness at the back of the unit

4-1

5. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

6. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

7. Connect the Seicane car stereo to your original car radio’s plugs.

Connect the Seicane car stereo to your original car radio’s plugs

8. Put the new Seicane car stereo into the dash.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put trim panel back on your new Seicane car stereo after the normal test.

Perhaps now you have a general understanding of a 2002-2007 Dodge Intrepid Magnum Neon car stereo installation process. If you have any problems you cannot solve independently, you can consult your dealer or a professional mechanic. Since a suitable car stereo plays an important role in the installation, you have to select an ideal stereo first of all. Here I would like to recommend an amazing 2002-2007 Dodge Intrepid Magnum Neon gps car stereo from Seicane with you.

http://www.seicane.com/seicane-s09206-2002-2007-dodge-intrepid-magnum-neon-android-touch-screen-radio-mirror-link-dvd-player-obd2-bluetooth-gps-navigation-system-dvr-tv-usb-sd-wifi-backup-camera-steering-wheel-control-1080p-video

If you yearn for a brand new driving experience, then you can consider installing this 2002-2007 Dodge Intrepid Magnum Neon car stereo for your car.

Main features are being supported by this 2002-2007 Dodge Intrepid Magnum Neon stereo including high-accuracy GPS function, Bluetooth hands-free phone calling, Bluetooth streaming music, CD/ DVD player, high-speed 3G and WiFi internet, file management, etc. Apart from these features, practical options like HD Digital TV, DVR, Backup Camera, 3G module, etc can all be added to this unit so as to meet your various needs.

Just take this 2002-2007 Dodge Intrepid Magnum Neon car stereo home right now. Wish you enjoy your driving.

1 2 Next »

Monthly Archives: February 2017

How to upgrade 2005 2006 2007 Saturn Relay car stereo with DVD Player HD Touch Screen Bluetooth Backup Camera

How to install a 2005-2008 Porsche 911 997 gps bluetooth dvd car stereo and fix power on and no sound problem

Useful Instruction on a 2007-2013 Alfa Romeo GT gps dvd car radio installation

How to remove a 2005-2013 Alfa Romeo 159 factory radio to install a new aftermarket stereo with GPS navigation Bluetooth radio tuner

How to Upgrade a 2003-2006 Jeep Wrangler Sound System with Stereo Radio Navigation

How to Replace a 1999-2004 Jeep Grand Cherokee Radio with GPS Audio System by Yourself

How to Remove a 2010-2013 Opel Astra Radio to Install a Bluetooth CD Stereo in an Easy Way

How to Replace a 2006-2009 Ford Fusion 4-door Sedan Radio with Audio Navigation Sound System

Perfect Guide on a 2002-2010 Chrysler Sebring PT Cruiser Stereo Removal and Installation with an Aftermarket Radio GPS System

How to Upgrade a 2002-2007 Dodge Intrepid Magnum Neon Aftermarket Stereo Radio CD Player

Post Navigation

Recent Posts

Views

Recent Comments

Archives

Subscribe

Categories

Meta