Monthly Archives: March 2017

You are browsing the site archives by month.
30Mar 2017

How to Replace a 2009-2013 Toyota Prius Left Car Radio with Bluetooth GPS Navigation System

⋅ Leave a Comment
2009-2013 Toyota Prius Left Car Radio after installation

In order to catch up with the trend, more and more car owners upgrade their factory radios with brand new car radios which are equipped with comprehensive features to help them enrich their in-car life. If you are also longing for more features in your car radio to make your in-car life more enjoyable and convenient, it is wide of you to upgrade your factory radio. And an installation guide is necessary for you to have a general understanding of the installation. The following is the step-by-step installation guide on a 2009-2013 Toyota Prius Left car radio. You may take it as reference if you have the same dashboard.

2009-2013 Toyota Prius Left Car Radio after installation

2009-2013 Toyota Prius Left Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2013 Toyota Prius car radio installation guide

1. Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool.

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

2. Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash.

Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash

Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash

3. Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force.

Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force

Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force

4. Disconnect the wiring.

Disconnect the wiring

Disconnect the wiring

5. Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver.

Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver

Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver

6. Pull the radio toward you slowly.

Pull the radio toward you slowly

Pull the radio toward you slowly

7. Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves.

Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves

Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane radio into the dash.

13. Put everything into their original place.

 

Above is the installation guide for a 2009-2013 Toyota Prius Left car radio. To deal with some problems you meet during the installation, you can seek advice from your dealer or ask a professional for help. But if you want to choose a compatible car radio for your beloved car, I’d like to share a 2009-2013 Toyota Prius Left car radio from Seicane with you. For more details, please click:

http://www.seicane.com/seicane-s128009-8-inch-android-hd-1024-600-touch-screen-radio-gps-car-a-v-system-for-2009-2013-toyota-prius-left-with-dvd-player-bluetooth-music-3g-wifi-mirror-link-obd2-rearview-camera-steering-wheel-control-aux-dvr-usb-sd-quad-core-cpu-s128009

Compatible with not only practical functions but also entertainment features, this great 2009-2013 Toyota Prius Left car radio is advanced enough for you to upgrade your factory radio so that you can embrace a brand new driving experience.

Equipped with worldwide real-time navigation function, you are able to make full use of features including current location, landmark building display, 3D street view, destination search and turn-by-turn voice directions, etc. So you can get the best route option to get to your desired destinations without getting lost.

The built-in Bluetooth module for hands-free calls and streaming music is also supported by this unit. Under the wireless Bluetooth technology, you are able to pair your Bluetooth-enabled mobile with this unit, with focusing on the road ahead and your hands on the steering wheel, you can make, receive, reject and mute hands-free phone calls as well as enjoy Bluetooth music streaming from your phone playlists.

Wish this car radio be your best road companion. Good luck to you!

29Mar 2017

The Effective Way to Install a 2005-2011 Opel Zafira Car Stereo with Audio System Bluetooth GPS Function

⋅ Leave a Comment
2005-2011 Opel Zafira Car Stereo after installation

To upgrade your car, a multifunctional car stereo can be your ideal choice to improve your interior environment as well as provide you with a brand new driving experience. Therefore, more and more car owners choose to replace their factory radio with a new aftermarket car stereo. If you have installed a car stereo before, you can find a correct installation guide and follow it to install the new car stereo on your own. Here I’d like to show you a picture of a Seicane    2005-2011 Opel Zafira Car Stereo after installation. If you have the similar or the exactly the same dashboard, you can take the following installation instruction as a reference.

2005-2011 Opel Zafira Car Stereo after installation

2005-2011 Opel Zafira Car Stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2011 Opel Zafira car stereo installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Put four removal sticks into four holes of the original car radio.

Put four removal sticks into four holes of the original car radio

Put four removal sticks into four holes of the original car radio

3. Take the original car radio out of the dashboard by pulling the removal sticks.

Take the original car radio out of the dashboard by pulling the removal sticks

Take the original car radio out of the dashboard by pulling the removal sticks

4. Disconnect the connectors at the back of the original radio.

5. Check all the accessories for the new Seicane car stereo.

6. Connect the harnesses to the back of the new Seicane car stereo.

7. Connect the Seicane car stereo to your original car radio’s plugs.

8. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane stereo into the dash.

10. Put everything into their original place.

 

Wish the above installation instruction can be helpful for you. If there are any doubts, you can not only consult your dealer and someone experienced but also a professional. If this is the first time for you to install a new car stereo, we sincerely suggest you go to a car stereo upgrade center to ask a technician to help you install the stereo. Besides, it is very essential for you to select a suitable car stereo. If you have no ideas, you may check out the following link which is a 2005-2011 Opel Zafira car stereo from Seicane.

http://www.seicane.com/seicane-s127681-hd-1024-600-multi-touch-screen-2005-2011-opel-zafira-android-gps-radio-aftermarket-navigation-system-with-mirror-link-obd2-cd-dvd-player-3g-wifi-rearview-camera-16g-flash

This modern multifunctional car stereo comes with a wide range of features mainly including 3D navigation, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, CD/DVD player, steering wheel control, USB port, SD card connection, IPod/ IPhone charging, etc. As long as you make full use of these features, you can not only build up a more convenient and comfortable car interior environment but also embrace a more wonderful driving experience.

Apart from these basic features, there are also many optional functions can be added to this unit according to your preference, including car DVR, 3G module, backup camera, OBD2, etc. The backup camera can be added for automatically switching to the parking image while reversing, which makes it much easier and safer for you to park.

Just don’t hesitate to take this unit home and wish you have a nice trip from now on!

24Mar 2017

How to Install a 2001-2011 TOYOTA HILUX Touch Screen Radio Stereo Systems in a Best Way

⋅ Leave a Comment
2001-2011 TOYOTA HILUX car stereo after installation

What actions will you take if you want to keep relaxed and pleasant all the way on your long-time driving? Frankly speaking, it is an adoptable way to upgrade your factory radio by installing a new aftermarket car stereo which is integrated with numerous comprehensive features to meet your different needs in car. Nowadays it is becoming a common phenomenon that more and more car owners try to finish the installation of a car stereo by themselves under the guidance of a detailed car stereo installation guide. Today I’d like to introduce a detailed 2001-2011 TOYOTA HILUX car stereo installation guide to you. If you have the same car model, you can carefully read it to help with your installation in the future.

2001-2011 TOYOTA HILUX car stereo after installation

2001-2011 TOYOTA HILUX car stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2001-2011 TOYOTA HILUX car stereo installation guide

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original car radio’s plugs.

9. Put the new Seicane car stereo into the dash.

10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

Before installation, please make clear every detailed step. If you come across any problems and don’t know how to solve them, you can consult your dealer, seek advice from someone experienced or turn to a professional for help. If you still think it hard to install such a car stereo, you can directly arrange a professional technician to help you install the new car stereo.

If you don’t know how to select a suitable car stereo for your beloved car, we suggest you to check out the following link which is a 2001-2011 TOYOTA HILUX car stereo from Seicane.

http://www.seicane.com/seicane-s126012-2-din-android-radio-navigation-system-for-2001-2011-toyota-hilux-with-hd-touch-screen-cd-dvd-player-bluetooth-wifi-3g-mirror-link-obd2-steering-wheel-control-usb-sd

This remarkable car stereo is upgraded to the stable Android 5.1.1 operation system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core CPU processor, so you are able to gain a smoother and faster operation experience than ever.

Thanks to the built-in 3D GPS navigation system of high accuracy, you are able to get access to features including current location, landmark building display, 3D street view, destination search and turn-by-turn voice directions. So you can have the most suitable routes to get to your desired destinations.

The built-in wireless Bluetooth technology for hands-free calls and streaming music is also supported by this unit, which can guarantee your driving safety and enjoyment as well.

Besides, this unit also comes with some additional entertainment features for you to enjoy a lot of fun in your driving.

Wish you like this 2001-2011 TOYOTA HILUX car stereo. Good luck to you!

22Mar 2017

How to Install a 2004-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 Car Stereo with Radio Bluetooth Navigation System

⋅ Leave a Comment
2004-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 Car Stereo after installation

Are you still looking for an ideal car stereo to replace your factory radio to enjoy more advanced features so as to gain more convenience and enjoyment in your car? If your answer towards this question is “yes”, then this article can help you a lot. In this article, we will introduce a step-by-step 2004-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 car stereo installation guide from Seicane. If you find your dashboard is the same as shown in the picture below, then you can refer to the following installation instruction.

2004-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 Car Stereo after installation

2004-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 Car Stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 car stereo installation guide

1. Detach the outer frame of the original car radio.

Detach the outer frame of the original car radio

Detach the outer frame of the original car radio

2. Use a screw driver to remove the screws marked with red circles.

Use a screw driver to remove the screws marked with red circles

Use a screw driver to remove the screws marked with red circles

3. Remove the screw on the lower right.

Remove the screw on the lower right

Remove the screw on the lower right

4. Remove the screw on the lower left.

Remove the screw on the lower left

Remove the screw on the lower left

5. Remove the screw on the upper left.

Remove the screw on the upper left

Remove the screw on the upper left

6. Remove the screw on the upper right.

Remove the screw on the upper right

Remove the screw on the upper right

7. Use a screw driver to remove the screws marked with red circles.

Use a screw driver to remove the screws marked with red circles

Use a screw driver to remove the screws marked with red circles

8. Remove the original car radio.

Remove the original car radio

Remove the original car radio

9. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

10. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

11. Insert the plug of the car into the socket of unit.

Insert the plug of the car into the socket of unit

Insert the plug of the car into the socket of unit

12. Remarks.

a. Plug in the radio antenna.

b. Plug in the GPS antenna.

Remarks

Remarks

13. Install the new Seicane stereo into the dashboard.

Install the new Seicane stereo into the dashboard

Install the new Seicane stereo into the dashboard

14. Fasten the new Seicane stereo with 4 screws and install the frame back.

Fasten the new Seicane stereo with 4 screws and install the frame back

Fasten the new Seicane stereo with 4 screws and install the frame back

15. Turn on the new Seicane radio to have a comprehensive check. If everything works well, all the installation is done. If not, please check if all the cables are connected correctly.

 

That’s all about how to install a 2004-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 car stereo. After reading the above installation guide, if you have any questions, you can contact your dealer, communicate with an experienced person or turn to a professional technician for help. Besides, it is essential to pick an ideal car stereo. If you have no ideas, you can refer to the following link which is a remarkable 2004-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 car stereo from Seicane.

http://www.seicane.com/2004-2012-mercedes-benz-b-class-w245-b150-b160-b170-b180-b200-b55-android-radio-9-inch-1024-600-touchscreen-bluetooth-music-multimedia-navigation-system-wifi-mirror-link-quad-core-cpu-1080p-video-s129682

Specially designed for 2004-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55, this car stereo comes with main features including 3D Navigation, FM/AM radio tuner, Bluetooth hands-free call, Bluetooth streaming music, USB port, SD card connection, etc.

According to turn-by-turn directions and voice prompts provided by the worldwide real-time navigation system, you are able to have the best route option to reach your desired destinations. Besides, you can keep you both safe and relaxed by pairing your Bluetooth-enabled mobile phone with this unit for hands-free calls and streaming music from your playlists at the same time.

What’s more, you can also add a backup camera to this unit for automatically switching to the parking image while reversing. Therefore, it is much helpful for your parking.

May your journey be filled with relaxation and enjoyment accompanied by this car stereo!

20Mar 2017

Easy-to-understand Method on Upgrading a 2009 2010 2011 VW Volkswagen Passat B6 Car Stereo with DVD Player Bluetooth GPS Navigation System

⋅ Leave a Comment
2009 2010 2011 VW Volkswagen Passat B6 Car Stereo after installation

To drive your beloved car to travel around and listen to your favorite music at the same time, you must feel very relaxed and enjoyable. To get access to more features in car, like GPS navigation, Bluetooth connectivity, FM/AM radio and so on, you can upgrade your factory radio by installing a new aftermarket stereo which supports a lot of practical and entertainment features. If you own a 2009 2010 2011 VW Volkswagen Passat B6, you must be familiar with the image below, which is a modern 2009 2010 2011 VW Volkswagen Passat B6 car stereo after installation from Seicane. If you plan to upgrade your old radio, you can refer to the installation guide as follows.

2009 2010 2011 VW Volkswagen Passat B6 Car Stereo after installation

2009 2010 2011 VW Volkswagen Passat B6 Car Stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009 2010 2011 VW Volkswagen Passat B6 car stereo installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

13. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

14. Connect the Seicane car stereo to your original car radio’s plugs.

15. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car stereo into the dash.

17. Put everything into their original place.

 

If you have any doubts about the car stereo and the installation, please don’t hesitate to contact your dealer, ask an experienced person for help. If you still think it impossible for you to finish the whole installation process successfully, we recommend that you should go to a car stereo upgrade center to ask a technician to help you install the stereo.

Besides, if you are still looking for a suitable car stereo for your car, you may check out the link below which is a 2009 2010 2011 VW Volkswagen Passat B6 car stereo from Seicane.

http://www.seicane.com/seicane-s128002w-android-gps-navigation-system-for-2009-2010-2011-vw-volkswagen-passat-b6-with-dvd-player-radio-bluetooth-mirror-link-obd2-dvr-rearview-camera-steering-wheel-control-3g-wifi

Coming with Android 5.1.1 operation system, powerful RK3188 1.6 GHz Cortex A9 Quad-core processor and 16 GB INand Flash, this smart 2009 2010 2011 VW Volkswagen Passat B6 car stereo can meet almost all your different needs to replace your old radio.

You can easily find you best route to get to your destinations according to turn-by-turn directions and voice prompts provided by 3D GPS navigation of high accuracy.

The Bluetooth module is specially built in to make you connect your Bluetooth-enabled mobile phone with this unit, so you can make, receive, reject and mute hands-free calls as well as enjoy Bluetooth music from your phone music playlists.

Wish you’ll like this car stereo and wish you have a good time accompanied by it!

16Mar 2017

How to Install a 2001-2008 TOYOTA RAV4 Touch Screen Radio Sound System Simply

⋅ Leave a Comment
2001-2008 TOYOTA RAV4 Touch Screen Radio after installation

To be honest, it is not necessary for you to have much professional knowledge if you want to finish the new car stereo installation independently. If you have some related installation experience and a correct installation guide, you can also achieve the whole installation on your own. The following is a Seicane 2001-2008 TOYOTA RAV4 car radio after installation. If you have the same or similar dashboard, you can take the following 2001-2008 TOYOTA RAV4 Touch Screen Radio installation instruction as a reference.

2001-2008 TOYOTA RAV4 Touch Screen Radio after installation

2001-2008 TOYOTA RAV4 Touch Screen Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2001-2008 TOYOTA RAV4 car radio installation instruction

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Put the new Seicane car radio into the dash.

10. Turn on the new Seicane car radio and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

That’s all about how to install a 2001-2008 TOYOTA RAV4 car radio. If you have any doubts, you can not only contact your dealer but also turn to a professional for help. Or you can also arrange someone experienced to help you alongside.

Since an ideal car radio matters a lot, it is fairly essential for you to select a suitable car radio. Here I’d like to share a 2001-2008 TOYOTA RAV4 Touch Screen Radio from Seicane with you. For more information, you might check:

http://www.seicane.com/seicane-s126002-aftermarket-android-gps-navigation-system-for-2001-2008-toyota-rav4-radio-replacement-with-bluetooth-touch-screen-3g-wifi-mirror-link-steering-wheel-control-obd2-aux-video-dvr

Equipped with the stable Android 5.1.1 operation system and a powerful 1.6 GHz Cortex A9 Quad-core processor, this radio can better process its database and information with smoother performance to be the best replacement for your factory radio.

You will get access to numerous advanced features, including high-precision 3D GPS navigation, Bluetooth hands-free calls, Bluetooth streaming music, FM/AM radio, USB port, USB card connection, steering wheel control, etc.

Let’s take Bluetooth technology as an example. With the Bluetooth module built in, you can make your Bluetooth-enabled mobile phone sync with this unit so as to make, receive, reject and mute hands-free calls as well as listen to music streaming from your phone.

If you like this radio, just take it and get it installed in your car right now. Wish you have a great trip from now on!

13Mar 2017

Essential Tutorial on a 2003-2011 Audi A4 S4 RS4 Stereo Radio Sound System Installation

⋅ Leave a Comment
2003-2011 Audi A4 S4 RS4 Stereo Radio after installation

If you own a car, you must know how import role a car stereo play in your car. With an ideal car stereo which is integrated with the latest hardware and software, the operation will become easier and smoother. And this stereo comes with a wide range of features to meet your different needs in car. Therefore, if you are tired of your factory radio for its single function, then don’t hesitate to replace it with a new all-in-one car stereo. The detailed installation steps for a 2003-2011 Audi A4 S4 RS4 Stereo Radio are as follows for your reference.

2003-2011 Audi A4 S4 RS4 Stereo Radio after installation

2003-2011 Audi A4 S4 RS4 Stereo Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2003-2011 Audi A4 S4 RS4 car stereo installation steps

1. There are four removal slots in the stereo.

There are four removal slots in the stereo

There are four removal slots in the stereo

2. Prepare four removal keys like what is shown in the picture below.

Prepare four removal keys like what is shown in the picture below

Prepare four removal keys like what is shown in the picture below

3. Insert the release keys into the holes of the stereo. Please make sure that you put the key with the flat side facing the outside of the stereo.

Insert the release keys into the holes of the stereo. Please make sure that you put the key with the flat side facing the outside of the stereo

Insert the release keys into the holes of the stereo. Please make sure that you put the key with the flat side facing the outside of the stereo

4. Pull outwards to release the stereo.

Pull outwards to release the stereo

Pull outwards to release the stereo

5. Disconnect the connectors and cables at the back of the stereo.

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original radio’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

Have you learnt something useful from the above steps? If you have any questions, please feel free to seek advice from your dealer. Or you can browse some professional websites. However, if you cannot do it on your own, you can directly arrange a technician to install it.

If you wonder what kind of stereos can fit your car well, I’d like to recommend a powerful 2003-2011 Audi A4 S4 RS4 Stereo Radio from Seicane to you. For more details, you might as well check out the link below:

http://www.seicane.com/seicane-s127028-android-hd-1024-600-touch-screen-radio-gps-audio-system-for-2003-2011-audi-a4-s4-rs4-with-usb-sd-cd-dvd-player-hd-1080p-video-3g-wifi-bluetooth-music-mirror-link-obd2-steering-wheel-control

Undoubtedly you will gain an excellent driving experience with this all-in-one unit installed in your beloved car.

This stereo runs with the stable Android 5.1.1 operation system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor to enhance its capability and performance.

Even you are not good at identifying directions, with the 3D GPS navigation of high accuracy, you can easily know your current location and accurately locate to your desired destinations according to the guidance of turn-by-turn direction and voice prompts.

Thanks to anti-shock feature and last position memory technology adopted, this unit is compatible with many audio and video formats, so it allows you to freely watch fantastic movies or videos in motion. However, for your safety, we sincerely suggest you not to do that.

Wish you like this stereo designed for 2003-2011 Audi A4 S4 RS4. Good luck to you!

10Mar 2017

How to Install a 2007-2012 Buick Enclave Touch Screen Radio Stereo Systems in a Best Way

⋅ Leave a Comment
2007-2012 Buick Enclave car radio after installation

What actions will you take in order to create a comfortable car interior environment and gain an excellent driving experience? As far as I am concerned, the straightest way is to install a brand new radio with a variety of practical and entertainment features to meet your different needs.

The following is a detailed 2007-2012 Buick Enclave car radio installation guide from Seicane. If you happen to own a 2007-2012 Buick Enclave, you can follow it step by step during the car radio installation.

2007-2012 Buick Enclave car radio after installation

2007-2012 Buick Enclave car radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2012 Buick Enclave car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Pry the edges of the panel with a lever, then remove it.

Pry the edges of the panel with a lever, then remove it

Pry the edges of the panel with a lever, then remove it

3. Unscrew eight bolts with a screwdriver holding the original radio and the a/c climate unit in place.

Unscrew eight bolts with a screwdriver holding the original radio and the a/c climate unit in place

Unscrew eight bolts with a screwdriver holding the original radio and the a/c climate unit in place

4. Remove the a/c climate controller.

Remove the a/c climate controller

Remove the a/c climate controller

5. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

6. Disconnect all the connectors at the back of the original radio.

Disconnect all the connectors at the back of the original radio

Disconnect all the connectors at the back of the original radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place.

 

Wish you can get some inspiration about the installation from the above guide. To settle any problems you meet in the installation, please feel free to contact your dealer or communicate with a professional for suggestion. If you still think it hard for you to install the radio by yourself, then you can arrange a technician to help you install the radio directly. If you don’t know what kind of radios can fit your car, I’d like to recommend a 2007-2012 Buick Enclave Touch Screen Radio Stereo from Seicane to you. For more details, please click:

http://www.seicane.com/seicane-s127012-android-head-unit-dvd-gps-system-for-2007-2012-buick-enclave-with-am-fm-radio-3g-wifi-bluetooth-mirror-link-obd2

This in-dash car radio is specially designed for you to replace your factory radio in a Buick Enclave which manufactured in 2007, 2008, 2009, 2010, 2011 and 2012. You can processes a smoother and more stable interface since this radio is loaded with the smart Android 5.1.1 operation system and a strong RK3188 1.6 GHz Cortex A9 Quad-core processor.

No matter where you are driving around, according to the turn-by-turn directions and voice prompts offered by the built-in GPS, you can accurately get to a gas station or other desired destinations.

While navigating, you are allowed to listen to music from radio, DVD, TV etc which is played behind the scene under GPS mode.

With the built-in BC6 Bluetooth module, this radio enables you to have hands-free calls and stream music without taking your hands off the steering wheel for both security and entertainment when you connect your Bluetooth-enabled mobile phone to this unit.

09Mar 2017

How to Install a 2003-2010 Renault Megane Radio with Stereo Sound System Speakers

⋅ Leave a Comment
2003-2010 Renault Megane Radio after installation

Nowadays, there is a trend that most car owners would like to replace their factory radio with a brand new radio. A multifunctional radio with comprehensive features can not only bring you great convenience but also a lot of enjoyment while you are driving. If you have a 2003-2010 Renault Megane and plan to replace your factory radio by installing a new car radio, then the following 2003-2010 Renault Megane car radio installation guide is worth your careful reading.

2003-2010 Renault Megane Radio after installation

2003-2010 Renault Megane Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003-2010 Renault Megane car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Insert two removal tools into the holes of the original car radio.

Insert two removal tools into the holes of the original car radio

Insert two removal tools into the holes of the original car radio

3. Take the original car radio out of dash by pulling the removal tools.

Take the original car radio out of dash by pulling the removal tools

Take the original car radio out of dash by pulling the removal tools

3-1

3-1

4. Disconnect all connectors at the back of the original car radio.

5. Check all the accessories for the new Seicane car radio.

6. Connect the harnesses to the back of the new Seicane car radio.

7. Connect the Seicane car radio to your original car radio ‘s plugs.

8. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane radio into the dash.

10. Put everything into their original place.

 

Wish the above guide do some help to your installation. Don’t worry if you meet some difficulties before or during the installation. In that case, please feel free to consult your dealer or seek help from a professional technician. Besides, to make sure that your installation makes sense, to pick an ideal radio is especially important. Here comes a link which is a 2003-2010 Renault Megane car radio from Seicane. You might check it out.

http://www.seicane.com/seicane-s127091-android-autoradio-gps-stereo-for-2003-2010-renault-megane-with-bluetooth-mirror-link-obd2-3g-wifi-cd-dvd-player-16g-flash-steering-wheel-control-hd-1080p-video

This 2003-2010 Renault Megane car radio is up-to-date enough for you to upgrade your factory radio. It is running with the stable Android 5.1.1 operation system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor.

This car radio is equipped with a large 7 inch HD multi-touch screen to facilitate the operation and make you enjoy the best display when you play a video, TV program and a movie in your beloved car. Thus, you can easily control GPS Navigation, DVD player, Bluetooth, Wifi and other features.

Besides, there are also a variety of entertainment features being supported by this radio to bring you and your passengers a ton of fun, including enjoying your favorite music, FM/AM radio, TV programs, movies, etc.

Just take this great car radio home and start your journey accompanied by it. Good luck to you!

08Mar 2017

How to install a 2006-2012 Toyota Corolla car radio with Bluetooth radio Tuner sound system

⋅ Leave a Comment
2006-2012 Toyota Corolla car radio after installation

Are you longing for a comfortable in-car environment as well as an excellent driving experience? If your answer is “yes”, then we suggest you replace your factory radio with a modern multifunctional radio which can not only bring you great convenience but also add a ton of fun to your trip. Anyway, if you’re going to finish the installation by yourself, before the installation, please make sure that you know every detailed step. And a correct installation guide will help you a lot. The following is a 2006-2012 Toyota Corolla car radio installation guide. You can take it as a reference if you own the same dashboard.

2006-2012 Toyota Corolla car radio after installation

2006-2012 Toyota Corolla car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 Toyota Corolla car radio installation guide

1. Remove the bottom panel (air conditioning) with plastic knife.

Remove the bottom panel (air conditioning) with plastic knife

Remove the bottom panel (air conditioning) with plastic knife

1-1

1-1

2. Pry the top of the original car CD panel with plastic knife.

Pry the top of the original car CD panel with plastic knife

Pry the top of the original car CD panel with plastic knife

3. Remove the four screws with a screwdriver.

Remove the four screws with a screwdriver

Remove the four screws with a screwdriver

4. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

5. Pull the plug of the original radio.

Pull the plug of the original radio

Pull the plug of the original radio

6. Socket docking with the original radio directly, instead of cutting the original plug off.

Socket docking with the original radio directly, instead of cutting the original plug off

Socket docking with the original radio directly, instead of cutting the original plug off

7. Put the original radio plug into our Seicane radio.

Put the original radio plug into our Seicane radio

Put the original radio plug into our Seicane radio

8. Put the new Seicane radio back into the dash.

9. Turn on the new Seicane radio to check if all functions work well. If it doesn’t, please check whether all the cables are connected correctly.

10. Install four screws and panels into their original place.

 

Wish the above guide can do some help to you. Please feel free to consult your dealer or seek help from a professional if you have any questions. To make sure your upgrading is successful, you need to buy a suitable car radio which can perfectly fit your car. Here I would like to recommend an intelligent 2006-2012 Toyota Corolla car radio from Seicane to you.

http://www.seicane.com/seicane-s1276288-8-inch-2006-2012-toyota-corolla-pure-android-gps-dvd-multimedia-navigation-system-with-quad-core-cpu-3g-wifi-radio-tuner-bluetooth-music-mirror-link-obd2-16g-flash-backup-camera-canbus-hd-1080p-video

With this radio installed in your car, you can make full use of its GPS function. The built-in 3D GPS navigation of high accuracy makes it easier to have the best route option and find your way to get to your desired destinations with ease. And thanks to dual zone function, you can freely listen to your favorite music behind the scene under GPS mode which won’t interrupt the GPS function.

Moreover, you will be filled with joy and comfort contributes to its compatibility with a wide range of audio and video formats including DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA while navigating to your desired destination.

What are you waiting for? It is time for you to upgrade your factory radio with a brand new radio.

Just take this remarkable 2006-2012 Toyota Corolla car radio with a competitive price right now!