To get access to high-accuracy GPS navigation function in a car is very significant for people who want to drive out for a self-driving trip. However, your factory radio’s GPS function may not be accurate and advanced enough. In that case, you can replace your old factory radio with a brand new car radio comes with the newest module. If you own a 2001-2011 TOYOTA HILUX and plan to upgrade your factory radio for getting access to advanced GPS function, then you can carefully read the following 2001-2011 TOYOTA HILUX car radio installation steps. Wish you can gain some help from these steps.
2001-2011 TOYOTA HILUX GPS Car Radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2001-2011 TOYOTA HILUX car radio installation steps
1. Remove two trim panels at each side of the center console and set it aside.
Remove two trim panels at each side of the center console and set it aside
2. Remove the top panel and set it aside.
Remove the top panel and set it aside
3. Remove 4 screws holding the unit with a Phillips screwdriver.
Remove 4 screws holding the unit with a Phillips screwdriver
4. Gently take out the panel on the radio interface.
Gently take out the panel on the radio interface
5. Take out the radio and disconnect cables at back of it.
Take out the radio and disconnect cables at back of it
6. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
7. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
8. Connect the Seicane car radio to your original car radio’s plugs.
9. Put the new Seicane car radio into the dash.
10. Turn on the new Seicane car radio and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
Wish you can gain some skills from the above installation guide on a 2001-2011 TOYOTA HILUX car radio. If you are trapped into trouble, please feel free to seek advice from your dealer or someone experienced. Or you can turn to a professional for help. For avoiding damage to both your car radio and your car, you can directly go to a car radio upgrade center to ask a technician to install the new car radio.
Besides, to help you effectively select an ideal car radio, here I would like to share a remarkable 2001-2011 TOYOTA HILUX car radio from Seicane with you. For more details, please click:
Integrated with a wide range of practical and entertainment features, this car radio specific for 2001-2011 TOYOTA HILUX can be regarded as the best replacement for your factory radio.
The high-precision worldwide real-time GPS navigation system is specially built in this unit, so you can utilize it to know your current locations and find the most suitable way to reach your desired destinations according to turn-by-turn directions and voice prompts.
Besides, thanks to the wireless Bluetooth technology, this unit enables you to make, answer, reject and mute hands-free calls as well as stream music from your mobile phone and listen to it as long as you synchronize your Bluetooth-enabled mobile phone with this car radio.
If you like this car radio, hurry up to add it to your shopping cart! Good luck to you!
Recent Comments