Monthly Archives: May 2017

You are browsing the site archives by month.
31May 2017

The Straightforward Methods to Remove and Install a 2008-2014 TOYOTA Sequoia car radio with Touch Screen Bluetooth GPS Navigation System DVD Player

⋅ Leave a Comment
2008-2014 TOYOTA Sequoia car radio after installation

If you are not satisfied with your factory radio, you can replace it with a new aftermarket car stereo. If you plan to finish the replacement process by yourself, you can find a step-by-step installation instruction to help you deal with the installation, which can help you reduce budget and gain sense of achievement. Here I would like to share a detailed 2008-2014 TOYOTA Sequoia car radio installation guide from Seicane with you. Wish it is helpful for you to some extent.

2008-2014 TOYOTA Sequoia car radio after installation

2008-2014 TOYOTA Sequoia car radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2014 TOYOTA Sequoia car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Pry around the panel on the left of the original car radio with a lever, and release it.

Pry around the panel on the left of the original car radio with a lever, and release it

Pry around the panel on the left of the original car radio with a lever, and release it

3. Remove the bottom pocket with your hands.

Remove the bottom pocket with your hands

Remove the bottom pocket with your hands

4. Remove the air conditioner control with a lever.

Remove the air conditioner control with a lever

Remove the air conditioner control with a lever

5. Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show.

Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show

Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show

5-1

5-1

5-2

5-2

6. Take the original car radio out of the dash with your hands.

Take the original car radio out of the dash with your hands

Take the original car radio out of the dash with your hands

7. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane radio into the dash.

13. Put everything into their original place.

 

Don’t worry and just calm down if you encounter any problems before or during the installation process. In that case, you can contact your dealer for seeking advice or turn to a professional for help. For avoiding damage to your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. If you are still looking for a suitable car radio which can work well in your car, here I’d like to recommend an amazing 2008-2014 TOYOTA Sequoia car radio from Seicane to you. You may check out the following link for more details.

https://www.seicane.com/android-hd-touchscreen-2008-2014-toyota-sequoia-car-stereo-with-radio-rds-gps-navigation-system-bluetooth-music-3g-wifi-cd-dvd-player-mirror-link-steering-wheel-control-s127107e

Based on the intelligent Android 6.0 operation system, a high-quality powerful 8-core 1.5 GHz RK-PX5 A53 processor and 32GB Inand flash as well as 2GB RAM, the performance of this car radio to operate and process the database has been greatly enhanced.

When you turn on GPS function, you will get access to a lot of features, including current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn voice directions. Therefore, it is much easier for you to find the right way to reach your desired destinations without making mistakes.

By pairing your Bluetooth-enabled mobile phone with this car radio, you are able to make, receive, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your phone with keeping your hands on the steering wheel and your eyes on the road ahead, which can make your driving more convenient and more relaxing.

What are you waiting for? Just add this unit to your shopping cart if you like it. Good luck to you!

27May 2017

Detailed Instruction on a 2003-2013 Audi A3 GPS Bluetooth DVD Car Radio Removal and Installation

⋅ Leave a Comment
2003-2013 Audi A3 GPS Bluetooth DVD Car Radio after installation

With a factory radio which only comes with single functions, you may easily get bored on a long trip. But with a multifunctional car radio, you can get access to some entertainment options so as to gain a ton of fun in your trip. If you are fed up with your factory radio, you can consider replacing it with a new multifunctional car radio. And you don’t have to worry about the installation as the installation process is not complicated with the help of a correct installation guide. If you have no experience at all, you can ask a professional for help. Now I’d like to share a detailed 2003-2013 Audi A3 car radio installation guide from Seicane for your reference.

2003-2013 Audi A3 GPS Bluetooth DVD Car Radio after installation

2003-2013 Audi A3 GPS Bluetooth DVD Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003-2013 Audi A3 car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Prepare four removal keys shown in the picture below.

Prepare four removal keys shown in the picture below

Prepare four removal keys shown in the picture below

3. There are four removal slots in the radio. Insert the release keys into the holes of the radio. Please remember to put the key with the flat side facing the outside of the radio.

There are four removal slots in the radio. Insert the release keys into the holes of the radio. Please remember to put the key with the flat side facing the outside of the radio

There are four removal slots in the radio. Insert the release keys into the holes of the radio. Please remember to put the key with the flat side facing the outside of the radio

4. Pull outwards to release the radio.

Pull outwards to release the radio

Pull outwards to release the radio

5. Disconnect the connectors and cables to release the radio.

Disconnect the connectors and cables to release the radio

Disconnect the connectors and cables to release the radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Don’t worry if you encounter any problems before or during the installation. In that case, you can seek advice from your dealer or turn to a professional for help. Or during the installation, you can also ask someone experienced to help you install the new car radio alongside. Since an ideal car radio plays irreplaceable role in your car, it is very important for you to select a suitable car radio which fits your car very well. Here I would like to introduce a marvelous 2003-2013 Audi A3 car radio from Seicane to you.

https://www.seicane.com/android-hd-touchscreen-car-radio-for-2003-2013-audi-a3-with-gps-radio-cd-dvd-player-1080p-video-wifi-bluetooth-mirror-link-steering-wheel-control-s127027e

This marvelous car radio has higher performance and configuration to provide users with the best services since it is loaded with the most advanced Android 6.0 operation system and a powerful 8- Core 1.5 GHz RK-PX5 A53 processor.

Through turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily know your current locations and find the right way to drive to your ideal destinations. And this unit’s dual zone function enables you to play music while navigating.

Under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this unit, thus you can make use of Bluetooth hands-free calls and streaming music to add convenience and joyfulness to your driving.

What’s more, you can add a TPMS to this unit which can reports real-time tire-pressure information and help you save fuel consumption, extend the tire life, decrease downtime and maintenance and increase environmental efficiency.

Wish you like this all-in-one unit and good luck to you.

23May 2017

How to Remove and Install a 2007 2008 2009 Ford Connect Car Radio with Bluetooth GPS Navigation System

⋅ Leave a Comment
2007 2008 2009 Ford Connect Car Radio after installation

To effectively enhance your car’s capabilities, it is a great idea for you to replace your factory radio with a new multifunctional car radio which brings a lot of convenience and entertainment to your trip. If you don’t know how to install a new car radio, you can go to a car radio or ask for a professional for help. The following is a detailed installation instruction from Seicane especially for a 2007 2008 2009 Ford Connect car radio. If you have the same or similar dashboard, you can take this guide as a reference.

2007 2008 2009 Ford Connect Car Radio after installation

2007 2008 2009 Ford Connect Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 2009 Ford Connect car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated.

Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated

Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated

2-1

2-1

3. Use a Philips screwdriver to unscrew the four self-tapping screws.

Use a Philips screwdriver to unscrew the four self-tapping screws

Use a Philips screwdriver to unscrew the four self-tapping screws

3-1

3-1

4. Gently remove the original car radio out of the dash.

Gently remove the original car radio out of the dash

Gently remove the original car radio out of the dash

5. Disconnect the antenna and connectors at the back of the original car radio.

Disconnect the antenna and connectors at the back of the original car radio

Disconnect the antenna and connectors at the back of the original car radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. If the new Seicane car radio works well, put it into the dash.

11. Put everything into their original place, and all the installation is done.

 

Wish the above installation steps can help with your installation to some extent. However, if you meet any problems you cannot deal with, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. To help you select an ideal car radio, I’d like to recommend an amazing 2007 2008 2009 Ford Connect car radio from Seicane to you. For more details, please click:

https://www.seicane.com/2007-2008-2009-ford-connect-android-hd-touchscreen-radio-cd-dvd-player-gps-navigation-support-bluetooth-wifi-mirror-link-rearview-camera-steering-wheel-control-s127301e

This car radio, compatible with a wide range of comprehensive features which enables you to have a brand new driving experience, can be regarded as a wide choice for you to upgrade your in-car life.

Even you are traveling around a totally unfamiliar place, you won’t have to worry about getting lost thanks to the high-precision 3D GPS navigation system. Through turn-by-turn directions and voice prompts, you can quickly know your current locations and find the right way to reach your destinations. And while navigating, you can also listen to your favorite music thanks to this unit’s dual zone function.

Besides, under the wireless Bluetooth technology, you are able to make, receive, reject and mute hands-free calls as well as enjoy Bluetooth streaming music without taking your hands off the steering wheel as long as you connect your Bluetooth-enabled mobile phone to this unit. Therefore, you can enjoy a safe, convenient and relaxing trip.

If you like this unit, don’t hesitate to add it to your cart. Wish you enjoy your trip.

18May 2017

The Straightforward Installation Steps on a 2000-2006 TOYOTA COROLLA EX GPS Bluetooth DVD Car Stereo

⋅ Leave a Comment
2000-2006 TOYOTA COROLLA EX GPS Bluetooth DVD after installation

If you have a car, you must notice that your factory radio is too outdated to be compatible with some modern features after a long-time use. Under this circumstance, it is very necessary for you to replace your factory radio with a new aftermarket car stereo since an ideal car stereo can be compatible with a lot of comprehensive features to upgrade your car’s capacities to some extent.  If you are going to make the replacement by yourself, then you can find a correct installation guide to help you. This passage aims to introduce an installation guide on a 2000-2006 TOYOTA COROLLA EX car stereo. If you have the same or the similar dashboard, you can take it as reference.

2000-2006 TOYOTA COROLLA EX GPS Bluetooth DVD after installation

2000-2006 TOYOTA COROLLA EX GPS Bluetooth DVD after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000-2006 TOYOTA COROLLA EX car stereo installation guide

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original car radio’s plugs.

9. Put the new Seicane car stereo into the dash.

10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

Now do you know how to remove and install the new car stereo for 2000-2006 TOYOTA COROLLA EX? If you have no ideas, please feel free to contact your dealer for seeking advice or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car stereo. Anyway, before installation, please check the compatibility between your new car stereo and your car. If your new car stereo is not compatible enough, it is suggested that you should quit it and buy an ideal one. Here I would like to recommend a remarkable 2000-2006 TOYOTA COROLLA EX car stereo from Seicane to you. For more details, please click:

https://www.seicane.com/android-2000-2006-toyota-corolla-ex-touchscreen-radio-gps-navigation-dvd-player-wifi-bluetooth-mirror-link-steering-wheel-control-backup-camera-1080p-video-s126002e

This car stereo is integrated with a wide range of comprehensive features, mainly including 3D GPS navigation, FM/AM radio tuner, Bluetooth hand-free calls, Bluetooth streaming music, DVD player, file management, steering wheel control, SD card connection, etc. By taking full advantage of these features, you are able to have a brand new and wonderful driving experience. Here I’d like to take 3D GPS function and Bluetooth function as examples.

Even you don’t have a good sense of direction, with the help of the 3D GPS navigation system of high accuracy, you can easily locate where you are and navigate to your desired destinations according to turn-by-turn directions and voice prompts.

Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car stereo. So you are able to dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your mobile phone without taking your hands off the steering wheel.

If you like this unit, just don’t forget to add it to your shopping cart. Good luck to you!

17May 2017

The Easy-to-understand Installation Steps on a 2001-2008 TOYOTA RAV4 GPS Bluetooth DVD Car Stereo

⋅ Leave a Comment
2001-2008 TOYOTA RAV4 GPS Bluetooth DVD after installation

What do you think is the easiest and most effective way to upgrade your car’s capabilities? As far as I am concerned, the easiest and most effective way is to replace your factory radio with a new aftermarket car stereo? If you want to gat access to upgraded and new features, you need to remove your factory radio and install a new car stereo. To install a new car stereo, you can find a correct installation guide to help you. The following is an installation guide on a 2001-2008 TOYOTA RAV4 car stereo. Whether you are experienced or totally a green hand, you can take this installation guide as a reference if you have the same or similar dashboard.

2001-2008 TOYOTA RAV4 GPS Bluetooth DVD after installation

2001-2008 TOYOTA RAV4 GPS Bluetooth DVD after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2001-2008 TOYOTA RAV4 car stereo installation guide

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original car radio’s plugs.

9. Put the new Seicane car stereo into the dash.

10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

Now do you have a general understanding of the installation process on a 2001-2008 TOYOTA RAV4 car stereo? If you don’t, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Besides, before the installation, it is very vital to check whether the new car stereo can fit your car well or not. If not, you can refer to an amazing 2001-2008 TOYOTA RAV4 car stereo from Seicane. For more details, please click:

https://www.seicane.com/android-aftermarket-car-radio-gps-navigation-system-for-2001-2008-toyota-rav4-with-dvd-player-bluetooth-wifi-mirror-link-steering-wheel-control-1080p-video-s126002e

This car stereo runs on the stable Android 6.0 operation system, a powerful 8 – Core 1.5 GHz RK-PX5 A53 processor and 32GB Inland Flash as well as 2GB RAM.

Even you are driving around a place you are totally unfamiliar with, you won’t get lost with this unit installed in your car. With the help of the high-accuracy 3D GPS navigation system, you are able to know your current locations and find the right way to arrive anywhere you would like to go according to turn-by-turn directions and voice prompts. Besides, you can also listen to music while you are navigating to your destinations.

What’s more, with the assistance of the wireless Bluetooth technology, you can make your Bluetooth-enabled mobile phone sync with this car stereo, thus, you can dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your mobile phone with remaining your hands on the steering wheel and keep your eyes on the road ahead.

Just take this amazing car stereo at a competitive price right now! Good luck to you!

16May 2017

How to Succeed in the Installation Process of a 2008-2013 Opel Vauxhall Insignia Buick Regal GPS Bluetooth DVD Car Radio

⋅ Leave a Comment
2008-2013 Opel Vauxhall Insignia Buick Regal GPS Bluetooth after installation

For most car owners, among a lot of ways to upgrade in-car life, one of the most effective ways is to replace their factory radio with a new aftermarket car radio. With a multifunctional car radio installed in your car, you can be provided with the best services thanks to a lot of comprehensive features.

If you are going to install a new car radio by yourself, then you should find an installation guide to help you. The following is a 2008-2013 Opel Vauxhall Insignia Buick Regal car radio installation guide which can be taken as your reference.

2008-2013 Opel Vauxhall Insignia Buick Regal GPS Bluetooth after installation

2008-2013 Opel Vauxhall Insignia Buick Regal GPS Bluetooth after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2013 Opel Vauxhall Insignia Buick Regal car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Remove the bottom panel part under the A/C control.

3. Remove the radio trim panel.

Remove the radio trim panel

Remove the radio trim panel

4. Remove screws that fix the radio panel.

Remove screws that fix the radio panel

Remove screws that fix the radio panel

5. Gently take out the radio panel from the dashboard.

Gently take out the radio panel from the dashboard

Gently take out the radio panel from the dashboard

6. Remove screws that holding the original radio.

Remove screws that holding the original radio

Remove screws that holding the original radio

7. Pull out the original radio.

Pull out the original radio

Pull out the original radio

8. Unplug all the connectors and cables at the back of the radio.

9. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

10. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

11. Connect the Seicane car radio to your original car radio’s plugs.

12. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. If the new Seicane car radio works well, put it into the dash.

14. Put everything into their original place, and all the installation is done.

 

That’s all about how to remove and install a 2008-2013 Opel Vauxhall Insignia Buick Regal car radio. If there are any doubts, please feel free to seek help from your dealer, someone experienced or a professional. Or you can browse some professional websites. However, if you don’t have any related installation experience at all, to avoid damage to your car radio or your car, you can directly arrange a professional technician to install the new car radio. Besides, it is very essential for you to select an ideal car radio for your car. If you have no ideas, you might as well check out the following link about an amazing 2008-2013 Opel Vauxhall Insignia Buick Regal car radio from Seicane.

https://www.seicane.com/android-2008-2013-opel-vauxhall-insignia-buick-regal-radio-gps-navigation-system-with-cd-dvd-player-hd-touchscreen-bluetooth-music-wifi-1080p-video-steering-wheel-control-s128013e

There is no denying that your driving experience can be taken up a notch since this multifunctional car radio is loaded with the stable Android 6.0 operation system, 8- core 1.5 GHz RK-PX5 A53 processor and 32GB Inland Flash as well as 2GB RAM.

The worldwide real-time 3D GPS navigation system is specially built in this unit. Therefore, you can find the right way to reach your desired destinations thanks to numerous comprehensive features, including current location, landmark building display, 3D street view, destination search and turn-by-turn voice directions, etc. And while navigating, you can freely enjoy music thanks to this unit’s dual zone function.

Apart from GPS function, there is another key feature, which is Bluetooth function. Under the wireless Bluetooth technology, you are able to connect your Bluetooth-enabled mobile phone to this unit so as to dial, answer, reject and mute hands-free calls as well as listen to streaming music without taking your hands off the steering wheel.

Wish you like this unit and good luck to you!

10May 2017

The Straightforward Strategy on Installing a 2000-2006 TOYOTA COROLLA EX Car Radio with Bluetooth GPS Navigation System

⋅ Leave a Comment
2000-2006 TOYOTA COROLLA EX Car Radio after installation

As a car owner, if you want to enjoy more convenience and enjoyment in your car, it will be a great ideal for you to replace your factory radio with a new multifunctional car radio. An ideal car radio can bring you a lot of options to provide you with much convenience and enjoyment as well on the way. If you have a 2000-2006 TOYOTA COROLLA EX and plan to replace your factory radio, then you can carefully refer to the following 2000-2006 TOYOTA COROLLA EX car radio installation instruction.

2000-2006 TOYOTA COROLLA EX Car Radio after installation

2000-2006 TOYOTA COROLLA EX Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000-2006 TOYOTA COROLLA EX car radio installation instruction

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Put the new Seicane car radio into the dash.

10. Turn on the new Seicane car radio and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

Now do you have a general understanding of the installation on a 2000-2006 TOYOTA COROLLA EX? If there are any problems you don’t know how to deal with, you can seek help from your dealer, someone experienced or a professional. Besides, it is very vital for you to pick a suitable car radio among a lot of car radios. If you don’t have any ideas, I’d like to share a great 2000-2006 TOYOTA COROLLA EX car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-2000-2006-toyota-corolla-ex-radio-dvd-gps-sat-nav-audio-system-with-touch-screen-wifi-bluetooth-music-obd2-mirror-link-steering-wheel-control-backup-camera-1080p-digital-tv-s126012e

Upgraded to the most advanced Android 6.0 operation system and 8 – Core 1.5 GHz RK-PX5 A53 processor, this car radio can greatly facilitate the operation to provide you with good in-car life.

The high-accuracy 3D GPS navigation system is especially built in for you to know your current locations and gain the most suitable route option to reach your desired destinations according to turn-by-turn directions and voice prompts. Additionally, while navigating, you can freely listen to splendid music thanks to this unit’s dual zone function.

Without taking your hands off the steering wheel, you can dial, answer, reject and mute Bluetooth hands-free calls as well as listen to music streaming from your phone as long as you wirelessly connect your Bluetooth-enabled mobile phone to this car radio.

Wish you like this unit and enjoy your trip. Good luck to you!

08May 2017

How to Upgrade a 1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Radio with Bluetooth GPS Navigation System

⋅ Leave a Comment
1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Radio after installation

How hard is it to upgrade your factory radio by installing a brand new car radio? Some car owners who want to enjoy more convenience and enjoyment in car may want to know the answer? As a matter of fact, it is not too complicated to install a new car radio under the guidance of a correct installation instruction if you have some related installation experience. If you are a car owner of a 1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i, you can carefully refer to the following 1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio installation instruction from Seicane.

1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Radio after installation

1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove the surrounding trim panel with a plastic removal tool.

Remove the surrounding trim panel with a plastic removal tool

Remove the surrounding trim panel with a plastic removal tool

2-1

2-1

2-2

2-2

3. Remove two screws fixed the radio on the dashboard.

Remove two screws fixed the radio on the dashboard

Remove two screws fixed the radio on the dashboard

3-1

3-1

4. Gently pull out the original car radio.

Gently pull out the original car radio

Gently pull out the original car radio

5. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio

Unplug the connectors and cables at the back of the radio

6. Remove the A/C control and unplug the connectors.

Remove the A/C control and unplug the connectors

Remove the A/C control and unplug the connectors

6-1

6-1

7. Remove two screws holding the heat vent.

Remove two screws holding the heat vent

Remove two screws holding the heat vent

8. Remove screws so as to remove radio frame.

Remove screws so as to remove radio frame

Remove screws so as to remove radio frame

9. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

10. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Wish the above installation instruction is helpful for you. If you encounter any difficulties and don’t know how to overcome them, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Anyway, first of all, you have to purchase a compatible car radio. If you have no ideas, you can check out the following link which is a great 1998-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Radio from Seicane.

https://www.seicane.com/9-inch-radio-hd-touchscreen-android-for-1998-2006-bmw-3-series-m3-e46-316i-318i-320i-323i-325i-gps-navigation-system-with-wifi-bluetooth-usb-mirror-link-rearview-aux-s129006e

This car radio based on the most stable Android 6.0 operation system, and 8 – Core 1.5 GHz RK-PX5 A53 processor to enhance its capacities and performance to be the best replacement for your factory radio.

With this car radio installed in your car, you can get access to the high-end 3D GPS navigation system. With the assistance of the worldwide real-time GPS function, you can locate where you are and find the most suitable way to arrive at your destinations according to turn-by-turn directions and voice prompts. And because of this unit’s dual zone function, you can freely enjoy beautiful music while navigating.

Besides, without keeping your hands off the steering wheel, Bluetooth hands-free calls and streaming music are both supported by this unit if you connect your Bluetooth-enabled mobile phone with this unit under the wireless Bluetooth technology.

Don’t hesitate to add this unit to your shopping cart. Good luck to you!

04May 2017

The Free Tutorial on a 2007 2008 2009 Frod Edge Car Radio Removal and Installation with Bluetooth Subwoofer Speakers

⋅ Leave a Comment
2007 2008 2009 Frod Edge Car Radio after installation

Are you an owner of a 2007 2008 2009 Frod Edge? If yes, you must want to have a more convenient and relaxing in-car life by installing a new car radio. When you have a plan to replace your factory radio by yourself, you’d better search for a step-by-step installation instruction to help you with the installation. Here I would like to share a detailed 2007 2008 2009 Frod Edge car radio installation instruction from Seicane with you. You can follow this instruction step by step to deal with the installation.

2007 2008 2009 Frod Edge Car Radio after installation

2007 2008 2009 Frod Edge Car Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 2009 Frod Edge car radio installation instruction

1. Remove the trim around gear shifter.

Remove the trim around gear shifter

Remove the trim around gear shifter

2. Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Remove screws securing center console lid with a screwdriver

3. Remove the center console trim.

Remove the center console trim

Remove the center console trim

4. Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Remove console side panels on both driver and passenger sides

5. Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Remove bolts securing radio bezel and AC controls

6. Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Unplug AC controls (from passenger side)

7. Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Remove the radio bezel and AC controls

8. Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Remove screws securing radio to the vehicle, and take the original radio out of the dash

9. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

10. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

11. Connect the Seicane car radio to your original car radio’s plugs, and put the new Seicane car radio.

12. Turn on the new Seicane car radio and check whether the radio is working properly.

13. Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

 

Wish you can gain some help from the above installation instruction. On the one hand, if you meet any difficulties, you can consult your dealer or a professional. On the other hand, if you still think it hard for you to finish all the steps, you’d better go to a car radio to arrange a technician to install the new car radio.

Besides, it is essential for you to pick an ideal car radio for your beloved car. Here I would like to recommend a remarkable 2007 2008 2009 Frod Edge car radio from Seicane to you. For more details, please click:

https://www.seicane.com/aftermarket-android-1024-600-radio-gps-navigation-system-for-2007-2009-frod-edge-with-dvd-player-wifi-bluetooth-mirror-link-obd2-rearview-camera-digital-tv-s127302e

Upgraded to the most advanced Android 6.0 operation system, 8-core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM, this amazing car radio can be the best replacement for your factory radio in 2007 2008 2009 Frod Edge.

Equipped with the worldwide real-time GPS navigation system, this car radio enables you to locate where you are and have the best route option to arrive at your desired destinations with the assistance of turn-by-turn directions and voice prompts.

What’s more, thanks to the wireless Bluetooth technology, you are able to pair your Bluetooth-enabled mobile phone with this car radio. So with your hands on the steering wheel and your eyes on the road ahead, you can make, answer, reject and mute hands-free calls as well as stream music from your phone music playlist.

If you like this unit, just hurry up to add it to your shopping cart. Good luck to you!