Monthly Archives: June 2017

You are browsing the site archives by month.
2008 2009 2010 2011 Toyota Auris Car Radio after installation

You may realize that when your factory radio cannot satisfied with your needs in car any more since it is not compatible with a lot of upgraded and new features, it is very important for you to replace it with a new aftermarket car stereo if you want to have a brand new driving experience. Today I would like to share a 2008 2009 2010 2011 Toyota Auris car stereo installation instruction from Seicane to you. If you own the same or similar dashboard and plan to upgrade your factory radio, then you can refer to this instruction carefully.

2008 2009 2010 2011 Toyota Auris Car Radio after installation

2008 2009 2010 2011 Toyota Auris Car Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2008 2009 2010 2011 Toyota Auris car stereo installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Use a flat plastic removal tool to remove the trims.

Use a flat plastic removal tool to remove the trims

Use a flat plastic removal tool to remove the trims

2-1

2-1

2-2

2-2

3. Remove four bolts that are holding the car radio.

Remove four bolts that are holding the car radio

Remove four bolts that are holding the car radio

4. Remove the air vent panel and disconnect connectors behind it.

Remove the air vent panel and disconnect connectors behind it

Remove the air vent panel and disconnect connectors behind it

5. Remove the original car radio frame.

Remove the original car radio frame

Remove the original car radio frame

6. Remove the original car radio out from the dashboard.

Remove the original car radio out from the dashboard

Remove the original car radio out from the dashboard

7. Disconnect all connectors at the back of the original car radio.

8. Check all the accessories for the new Seicane car stereo.

9. Connect the harnesses to the back of the new Seicane car stereo.

10. Connect the Seicane car stereo to your original radio’s plugs.

11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car stereo into the dash.

13. Put everything into their original place. All the installation is done.

 

Please calm down and don’t be over worried if you have any doubts about the installation or your car stereo. Under this circumstance, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car stereo.

Besides, it is essential for you to select an ideal car stereo for your beloved car firstly. Here I would like to recommend an excellent 2008 2009 2010 2011 Toyota Auris car stereo from Seicane to you. For more details, please click:

https://www.seicane.com/android-2008-2011-toyota-auris-hd-touchscreen-radio-dvd-gps-navigation-system-with-mirror-link-bluetooth-obd2-dvr-rearview-camera-3g-wifi-steering-wheel-control-mirror-link-1080p-s32730

This car stereo’s operation system has been upgraded to the stable Android 6.0 version and it is loaded with a powerful 8-core 1.5 GHz RK-PX5 A53 processor, thus you are going to have a much smoother and faster operation experience with it installed in your car.

With the assistance of the intelligent 3D GPS navigation system, you can accurately know your current locations and get the most suitable route option to reach your destinations through turn-by-turn directions and voice prompts. Additionally, thanks to this unit’s dual zone function, you can freely enjoy your favorite music while navigating.

While as for the entertainment features, you have several options. You can fully utilize this car stereo to play CDs, VCDs, Bluetooth streaming music, FM/AM radio, etc to relax both yourself and your passengers in car.

Wish you have a brand new driving experience accompanied by this all-in-one car stereo. Good luck to you!

2013 2014 Kia Cerato Left GPS Bluetooth DVD Car Radio after installation

As a car owner, if you haven’t upgraded a car radio on your own before, you may think it quite hard for you to remove the factory radio and install a new car radio in your car. As a matter of fact, the whole removal and installation process is not too complicated. You can either go to a car radio upgrade center or ask a professional for help. This article aims to introduce a detailed installation instruction from Seicane especially for a 2013 2014 Kia Cerato Left car radio. If you have the same or similar dashboard, you can take this instruction as a reference.

2013 2014 Kia Cerato Left GPS Bluetooth DVD Car Radio after installation

2013 2014 Kia Cerato Left GPS Bluetooth DVD Car Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013 2014 Kia Cerato Left Car radio installation instruction

1. Pry the side panel with a lever, and then remove it.

Pry the side panel with a lever, and then remove it

Pry the side panel with a lever, and then remove it

2. Remove four screws with a screwdriver.

Remove four screws with a screwdriver

Remove four screws with a screwdriver

3. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it.

Remove the trim panel with your hands. If necessary, you may use a lever to loosen it

Remove the trim panel with your hands. If necessary, you may use a lever to loosen it

4. Remove four screws holding the factory radio in place with a screwdriver.

Remove four screws holding the factory radio in place with a screwdriver

Remove four screws holding the factory radio in place with a screwdriver

5. Take the factory radio out of the dash with your hands.

Take the factory radio out of the dash with your hands

Take the factory radio out of the dash with your hands

6. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11.Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Perhaps now you have a general understanding of the installation process for a 2013 2014 Kia Cerato Left car radio. If you encounter any difficulties and don’t know how to overcome them, you can contact your dealer or seek help from a professional. Or during the installation, you can ask someone experienced to help you alongside. Anyway, it is very crucial for you to select an ideal car radio for your beloved car. If you don’t know which kind of car radio can fit your car well, I’d like to recommend a remarkable 2013 2014 Kia Cerato Left car radio from Seicane to you. For more information, please click:

https://www.seicane.com/inch-android-for-aftermarket-radio-2013-2014-kia-cerato-left-with-gps-navigation-system-dvd-player-bluetooth-mirror-link-touch-screen-obd2-dvr-rearview-camera-1080p-3g-wifi-steering-wheel-control-s32509

Loaded with the stable Android 6.0 operation system, a powerful 8-core 1.5 GHz RK-PX5 A53 processor and 32 GB INand Flash as well as 2GB RAM, this car radio can be the best replacement for your factory radio in your

Even if you don’t have a good sense of directions, you can get a lot of help from this car radio’s 3D GPS function. When you are driving around an unfamiliar location, you can turn on GPS function to easily locate where you are and accurately navigate to your desired destinations thanks to these features, including landmark building display, 3D street view, destination search, turn-by-turn voice directions, etc. Besides, with dual zone function, you can freely enjoy your favorite music while navigating, and the music can automatically switch to GPS voice.

For your parking safety, you can add a backup camera to this unit for automatically switching to the parking image while reversing.

Wish you enjoy your driving experience accompanied by this all-in-one car radio. Good luck!

1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 Car Radio after installation

When you are arriving around an unfamiliar place, an accurate GPS navigation system can help you find the best way to your destination within the least time and guide you there with ease. However, your factory radio may not support GPS function or the function is not powerful enough. In that case, it is wise of you to upgrade your factory radio with a multifunctional car radio with GPS navigation. The following is a step-by-step installation guide from Seicane for a   1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 car radio, if you have the same or similar dashboard, you can refer to this guide to help with the installation.

1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 Car Radio after installation

1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Insert four release keys in the removal slots of the radio.

Insert four release keys in the removal slots of the radio

Insert four release keys in the removal slots of the radio

3. Pull outwards to release the radio.

Pull outwards to release the radio

Pull outwards to release the radio

4. Disconnect all the connectors at the back of the original radio.

Disconnect all the connectors at the back of the original radio

Disconnect all the connectors at the back of the original radio

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

It is not abnormal if you encounter any problems before or during the installation. To solve these problems, you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to remove the factory radio and install the new car radio for your beloved car, you can directly go to a car radio upgrade center to arrange a technician to help you install the new car radio. What’s more, if you are still looking for an ideal car radio for your beloved car, you may check out the following link which is a remarkable 1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 car radio from Seicane.

https://www.seicane.com/android-1997-2004-audi-a6-s6-rs6-radio-dvd-gps-navigation-system-with-bluetooth-wifi-steering-wheel-control-mirror-link-backup-camera-dvr-obd2-dab-s32577

This remarkable car radio, which is loaded with the advanced Android 6.0 operation system and a 8-core 1.5 GHz RK-PX5 A53 processor, comes with a wide range of comprehensive features to meet your different needs in car.

With the assistance of the powerful 3D GPS navigation system of high accuracy, you can quickly and easily know your current locations and have the most suitable route option to get to your desired destinations through turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, you can also listen to your favorite music which is played behind the scene under GPS mode.

Moreover, as for the entertainment options, you don’t have to worry. With this car radio installed in your car, you can get access to DVD player, Bluetooth streaming music or FM/AM radio to relax both yourself and your passengers in car.

What are you waiting for? If you like this car radio, just add it to your shopping cart, Good luck!

2006 2007 2008 2009 2010-2011 OPEL Corsa GPS Bluetooth Car Radio after installation

Are you desired of having a wonderful trip with your families or friends in your own car? If yes, an accurate GPS navigation system is essential for you to get to your desired destinations without getting lost. If your factory radio cannot support GPS function, or the GPS function is not powerful enough, then it is a great idea for you to replace your factory radio with an advanced aftermarket car radio with comprehensive features. Here I’d like to introduce a step-by-step   2006 2007 2008 2009 2010-2011 OPEL Corsa car radio installation guide from Seicane to you.

2006 2007 2008 2009 2010-2011 OPEL Corsa GPS Bluetooth Car Radio after installation

2006 2007 2008 2009 2010-2011 OPEL Corsa GPS Bluetooth Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 2010-2011 OPEL Corsa car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Put four removal sticks into four holes of the original car radio.

Put four removal sticks into four holes of the original car radio

Put four removal sticks into four holes of the original car radio

3. Take the original car radio out of the dashboard by pulling the removal sticks.

Take the original car radio out of the dashboard by pulling the removal sticks

Take the original car radio out of the dashboard by pulling the removal sticks

4. Disconnect the connectors at the back of the original radio.

5. Check all the accessories for the new Seicane car stereo.

6. Connect the harnesses to the back of the new Seicane car stereo.

7. Connect the Seicane car stereo to your original car radio’s plugs.

8. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane stereo into the dash.

10. Put everything into their original place.

 

That’s all about how to remove and install a 2006 2007 2008 2009 2010-2011 OPEL Corsa car radio. Have you already make clear every detailed installation step? If not, you can contact your dealer or turn to a professional for help. Or you can ask someone experienced to help you alongside. For avoiding damage to either your car radio or your car, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio.

To help you effectively select an ideal car radio, I’d like to recommend a remarkable 2006 2007 2008 2009 2010-2011 OPEL Corsa car radio from Seicane to you. For more details, please click:

https://www.seicane.com/android-2006-2011-opel-corsa-hd-touch-screen-radio-head-unit-with-gps-navigation-audio-system-bluetooth-music-usb-wifi-1080p-video-digital-tv-s127686e

This car radio runs on the advanced Android 6.0 operation system and a powerful 8-core 1.5 GHz RK-PX5 A53 processor to enhance its capacities, configuration and performance.

With the help of the worldwide real-time GPS navigation function, you can get access to a lot of features, including current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn voice directions. By taking advantage of these features, you can accurately find the right way to reach your destinations. And with dual zone function, while navigating, you can listen to your favorite music.

Besides, by linking your Bluetooth-enabled mobile phone with this car radio through wireless Bluetooth connection, both Bluetooth hands-free calls and streaming music are available for you to have a convenient and relaxing driving experience.

Don’t forget to add this car radio to your shopping cart if you like it. Good luck to you!

1 Din Universal (Panel Slidable) car radio after installation

Now more and more car owners are keen on pursuing a more comfortable in-car environment, thus they try many ways to upgrade their cars’ capabilities. One of the most poplar ways is to replace the factory radio with a new aftermarket car radio which comes with both practical and entertainment features. To install a new car radio, you can refer to a detailed installation guide for help. The following is a detailed 1 Din Universal (Panel Slidable) car radio installation guide from Seicane for your reference.

1 Din Universal (Panel Slidable) car radio after installation

1 Din Universal (Panel Slidable) car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

1 Din Universal (Panel Slidable) car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

If you have any questions, please don’t hesitate to consult your dealer for seeking advice, or turn to a professional for help. During the installation, you can also ask someone experienced to help you install the new car radio. Anyway, it is crucial for you to carefully select an ideal car radio for your car. If you don’t know which kind of car radio can fit your car well, you may refer to the link below which is a remarkable 1 Din Universal (Panel Slidable) car radio from Seicane.

https://www.seicane.com/1-din-universal-panel-slidable-android-hd-touch-screen-radio-gps-navigation-system-bluetooth-music-wifi-audio-mirror-link-steering-wheel-control-s121020e

There is no doubt you will embrace a brand new operation experience since the operation system of this car radio has been upgraded to Android 6.0 version and this car radio is equipped with a powerful 8-core CPU processor.

With the help of the high-precision 3D GPS navigation, you won’t get lost any longer even you have no good sense of directions. Under the guidance of turn-by-turn directions and voice prompts, you can know your current locations and accurately navigate to your destinations. Additionally, you can freely enjoy your favorite music from radio/AV/DVD/TV etc while navigating.

Besides, by linking your Bluetooth-enabled mobile phone with this car radio, you can dial, answer, reject and mute hands-free calls as well as stream music from your phone music playlists, which add a lot of convenience and joyfulness to your driving.

Wish you like this unit and good luck to you!

2008 2009 2010 2011 2012-2013 VW Volkswagen Scirocco Passat CC Golf 6 GPS Bluetooth Car Radio after installation

It is known that with a GPS navigation built in a car radio, you can be provided with the most accurate direction and voice guidance to have the best route option to reach your desired destinations. However, not all factory radios come with GPS navigation function. If your factory radio has no navigation function, you can easily replace it with a new aftermarket car radio which can be compatible with a lot of features. To achieve the whole installation process, a detailed installation guide can be instructive. If you own a 2008 2009 2010 2011 2012-2013 VW Volkswagen Scirocco Passat CC Golf 6, you can take the following 2008 2009 2010 2011 2012-2013 VW Volkswagen Scirocco Passat CC Golf 6 car radio installation instruction from Seicane as a reference.

2008 2009 2010 2011 2012-2013 VW Volkswagen Scirocco Passat CC Golf 6 GPS Bluetooth Car Radio after installation

2008 2009 2010 2011 2012-2013 VW Volkswagen Scirocco Passat CC Golf 6 GPS Bluetooth Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 2011 2012-2013 VW Volkswagen Scirocco Passat CC Golf 6 car radio installation instruction

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car radio.

13. Connect the harnesses to the back of the new Seicane car radio.

14. Connect the Seicane car radio to your original car radio’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place.

 

That’s the whole removal and installation process of a 2008 2009 2010 2011 2012-2013 VW Volkswagen Scirocco Passat CC Golf 6 car radio. If there are any questions, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. If you are afraid of making damage to either your car radio or your car, you can straightly arrange a technician to help you install the new car radio. Besides, it is very crucial for you to pick an ideal car radio for your beloved car. But if you don’t know what kind of car radio can fit your car, I’d like to share a great 2008 2009 2010 2011 2012-2013 VW Volkswagen Scirocco Passat CC Golf 6 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/seicane-android-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-passat-cc-golf-6-with-3g-wifi-mirror-link-obd2-bluetooth-s129698e

This car radio is loaded with the intelligent Android 6.0 operation system, a powerful 8-core CPU processor and 32GB INand flash as well as 2GB RAM.

With a large 9 inch HD 1024*600 multi-touch screen, this car radio enables you to enjoy the amazing display effect when you watch videos, TV programs, or movies and have a perfect view of the road ahead.

Under the guidance of turn-by-turn directions and voice prompts provided by 3D GPS navigation system, you are able to locate where you are and find the right way to reach your desired destinations. And you can also listen to your favorite music while navigating because of this unit’s dual zone function.

While for entertainment options, you can add a DVD player to this unit to play splendid music, TV programs, videos and movies, etc to relax both yourself and your passengers.

If you like this car radio, don’t hesitate to add it to your shopping cart. Good luck to you!

2006 2007 2008 2009 2010-2013 VW Volkswagen EOS Bluetooth GPS after installation

To upgrade your factory radio with a new car radio not only makes you keep up with the trend but also takes your driving experience up a notch. With an ideal car radio installed in your car, you will be greatly satisfied with both the convenience and enjoyment the new car radio brings to you. If you have some related installation experience, under the guidance of a detailed installation experience, the upgrading will be easier for you. The following is a step-by-step installation guide of a 2006 2007 2008 2009 2010-2013 VW Volkswagen EOS car radio, you can take it as a reference to help with your installation.

2006 2007 2008 2009 2010-2013 VW Volkswagen EOS Bluetooth GPS after installation

2006 2007 2008 2009 2010-2013 VW Volkswagen EOS Bluetooth GPS after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 2010-2013 VW Volkswagen EOS car radio installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car radio.

13. Connect the harnesses to the back of the new Seicane car radio.

14. Connect the Seicane car radio to your original car radio’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place.

 

Now do you know how to remove the factory radio and install a new car radio in a 2006 2007 2008 2009 2010-2013 VW Volkswagen EOS? If you don’t know exactly, you can contact your dealer for seeking advice, communicate with someone experienced or turn to a professional for help. For avoiding damage to your car radio or your car, you can go to a car radio upgrade center to ask a professional technician help you install the new car radio. Besides, before installation, please do check whether your new car radio fits your beloved car well or not. If not, you’d better quit it and buy another suitable one. Here I would like to introduce an amazing 2006 2007 2008 2009 2010-2013 VW Volkswagen EOS car radio from Seicane to you. You may check out the link below for more details.

https://www.seicane.com/2006-2013-vw-volkswagen-eos-android-in-dash-radio-navigation-system-with-dvd-player-3g-wifi-obd2-dvr-bluetooth-steering-wheel-control-mirror-link-s129698e

Loaded with the advanced Android 6.0 operation system, a powerful 8-core CPU processor and 32GB INand flash as well as 2GB RAM, this amazing car radio enables you to have a much smoother and faster operation experience than ever.

You won’t get lost any longer with the help of this car radio’s high-accuracy 3D GPS navigation. Thanks to turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily locate where you are and accurately navigate to where you would like to go to. Additionally, you can freely listen to your favorite music from radio/AV/DVD/TV etc while navigating.

Besides, without taking your hands off the steering wheel, both Bluetooth hands-free calls and Bluetooth streaming music are both available for you as long as you connect your Bluetooth-enabled mobile phone to this unit though the wireless Bluetooth module. Therefore, you can gain great convenience and enjoyment in your trip.

Wish you like this unit and good luck to you!