Monthly Archives: August 2017

You are browsing the site archives by month.
30Aug 2017

An Easy Installation Guide on a 2004 2005 2006 2007 2008-2010 Peugeot 407 GPS Navi Car Radio

⋅ Leave a Comment
2004 2005 2006 2007 2008-2010 Peugeot 407 GPS Navi Car Radio after installation

It is very common that you find your factory radio in your beloved car cannot be compatible with some modern features because it is outdated. Under this circumstance, you might as well replace your factory radio with a new aftermarket car radio which can support a wide range of practical and entertainment features. With these features, your in-car life will become more comfortable, more convenient and more satisfactory. The following is a 2004 2005 2006 2007 2008-2010 Peugeot 407 car radio installation instruction from Seicane, which can be taken as your reference.

2004 2005 2006 2007 2008-2010 Peugeot 407 GPS Navi Car Radio after installation

2004 2005 2006 2007 2008-2010 Peugeot 407 GPS Navi Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2004 2005 2006 2007 2008-2010 Peugeot 407 car radio installation instruction

1. The original dashboard.

The original dashboard

The original dashboard

2. There are two removal slots in this radio.

There are two removal slots in this radio

There are two removal slots in this radio

3. Insert two release keys into the holes of the radio and turn them to release the radio.

Insert two release keys into the holes of the radio and turn them to release the radio

Insert two release keys into the holes of the radio and turn them to release the radio

3-1

3-1

4. Pull out the original radio.And then unplug the connectors at the back of it.

Pull out the original radio.And then unplug the connectors at the back of it

Pull out the original radio.And then unplug the connectors at the back of it

4-1

4-1

5. There are two screws that fix the screen and the pocket.

There are two screws that fix the screen and the pocket

There are two screws that fix the screen and the pocket

5-1

5-1

6. Unscrew these two screws to removethe screen and the pocket.

7. Check all the accessories for the new Seicane radio.

Check all the accessories for the new Seicane radio

Check all the accessories for the new Seicane radio

8. Connect the harnesses to the back of the new Seicane radio.

Connect the harnesses to the back of the new Seicane radio

Connect the harnesses to the back of the new Seicane radio

9. Connect the Seicane radio to your original radio’s plugs.

10. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane radio into the dash.

12. Put everything into their original place.

 

Now do you know how to removal the factory radio and install the new car radio for your 2004 2005 2006 2007 2008-2010 Peugeot 407? If you have any problems, you can consult your dealer, communicate with someone experienced or turn to a professional for help. And if you still think it hard for you to finish the whole installation successfully, you’d better directly go to a car radio upgrade center to have the new car radio installed by a professional. Additionally, to help you better select an ideal car radio for your car, you can refer to the following link which is a 2004 2005 2006 2007 2008-2010 Peugeot 407 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-car-radio-gps-navigation-for-2004-2005-2006-2010-peugeot-407-with-dvd-player-bluetooth-usb-1080p-video-wifi-mirror-link-s32958f

This car radio is running on the most advanced and stable Android 7.1.1 operation system and equipped with a powerful quad-core CPU processor, which is good for enhancing your car’s capabilities.

Integrated with the latest 3D GPS navigation system of high accuracy, this remarkable unit allows you to get to any locations you would like to go to through turn-by-turn directions and voice prompts. And with dual zone function, you can freely listen to your favorite music while navigating.

Thanks to the Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this unit so that you can dial, answer, reject or mute hands-free calls as well as listen to Bluetooth streaming music with your hands on the steering wheel and your eyes on the road ahead.

Wish you like this unit and good luck to you.

28Aug 2017

Simple Steps to Install a 2016 Kia Sportage Android Sat Navi Stereo support Quad-core CPU 4G WiFi

⋅ Leave a Comment
2016 Kia Sportage Android Sat Navi Stereo after installation

Nowadays, cars are becoming more common globally and more and more people choose to buy a car for convenience. If you want a better driving experience, the simplest way is to upgrade your stock radio. I’d like to introduce a step-by-step installation guide for a 2016 Kia Sportage android Sat Navi stereo from Seicane to you. Wish you like it.

2016 Kia Sportage Android Sat Navi Stereo after installation

2016 Kia Sportage Android Sat Navi Stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2016 Kia Sportage android Sat Navi stereo installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Can you understand all the steps for the 1998-2002 Mercedes Benz A Class W168? If you can’t understand any step of installation, you can turn to the dealer or professional to ask for help. Or arrange them to install it directly. Moreover, you have to check whether the new car stereo can work well in your car at first. If you are still looking for one, here is a great 2016 Kia Sportage android Sat Navi stereo from Seicane for your reference.

https://www.seicane.com/hd-touchscreen-android-radio-for-2016-kia-sportage-dvd-player-with-gps-navigation-bluetooth-1080p-usb-wifi-mirror-link-s32580f

This OEM 2016 Kia Sportage Android 7.1.1 Car Stereo DVD GPS System features built-in Bluetooth technology for simple music streaming from Bluetooth-enabled devices and making phone calls using the integrated microphone. And the 3D navigation provides you with accurate guidance to get to the destinations in the least time.

23Aug 2017

A Step-by-step Installation Guide on a 2015 Peugeot 308S Car Radio with DVD Bluetooth GPS Navigation System

⋅ Leave a Comment
2015 Peugeot 308S Car Radio after instalation

Nowadays, more and more car owners tend to replace their car radio regularly so as to ensure their car radio can be compatible with the latest features? If you are not satisfied with your factory radio since it is not up-to-date enough for you to make use of some modern features, it is wise of you to consider replacing your factory radio with a new aftermarket car radio which can bring you a brand new in-car experience. And if you plan to install your car radio by yourself, you can find a related installation guide to help you. The following 2015 Peugeot 308S car radio installation instruction can be taken as your reference if you own the same car model.

2015 Peugeot 308S Car Radio after instalation

2015 Peugeot 308S Car Radio after instalation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2015 Peugeot 308S car radio installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Now do you have a general understanding of the above installation on a 2015 Peugeot 308S car radio? If you encounter any problems you cannot deal with independently, please feel free to contact your dealer, communicate with someone experienced or seek help from a professional. Or you can directly arrange a technician to help you install the new car radio. If you are still searching for an ideal car radio but don’t have any ideas, you can refer to the following link which is an amazing 2015 Peugeot 308S car radio from Seicane.

https://www.seicane.com/2015-peugeot-308s-android-radio-gps-navigation-dvd-player-stereo-support-bluetooth-usb-1080p-video-dvr-obd2-wifi-backup-camera-sterring-wheel-control-s32560f

This car radio, specific for 2015 Peugeot 308S, is running on the most advanced Android 7.1.1 operation system and a strong quad-core CPU processor, so you can enjoy a much smoother, faster and easier operation experience.

Under the guidance of turn-by-turn direction and voice prompts provided by the worldwide real-time GPS navigation system, you are able to know your current locations and arrive at any locations you would like to go to. Besides, with dual zone function, this unit enables you to freely enjoy your favorite music while navigating.

And you can take full advantage of Bluetooth module to pair your Bluetooth-enabled mobile phone and this car radio so as to dial, answer, reject and mute hands-free calls as well as listen to Bluetooth music streaming from your phone.

Just add this car radio to your shopping cart if you like this unit. Good luck to you!

22Aug 2017

Tips for a 2003 2004 2005 2006 2007 -2011 Porsche Cayenne GPS Bluetooth DVD Car Radio Upgrade

⋅ Leave a Comment
2003 2004 2005 2006 2007 -2011 Porsche Cayenne GPS Bluetooth after installation

In the past you may spend much money not only in purchasing a new car radio but also in asking a technician to install the new car radio. However, if you know how to install a new car radio by yourself, it will save you quite a little money. The following is a 2003 2004 2005 2006 2007 -2011 Porsche Cayenne car radio installation instruction from Seicane. If you have the same car model and plan to replace your factory radio, you can take this instruction as a reference to help with the car radio installation.

2003 2004 2005 2006 2007 -2011 Porsche Cayenne GPS Bluetooth after installation

2003 2004 2005 2006 2007 -2011 Porsche Cayenne GPS Bluetooth after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003 2004 2005 2006 2007 -2011 Porsche Cayenne car radio installation instruction

1. Pry out the trim piece along the perimeter of the center dashboard with a lever.

Pry out the trim piece along the perimeter of the center dashboard with a lever

Pry out the trim piece along the perimeter of the center dashboard with a lever

2. Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation.

Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation

Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation

3. Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily.

Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily

Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily

4. Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray.

Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray

Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray

5. Press the tab (green arrow) on the antenna lead and pull it out of the stereo.

Press the tab (green arrow) on the antenna lead and pull it out of the stereo

Press the tab (green arrow) on the antenna lead and pull it out of the stereo

6. Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years.

Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle's different years

Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original car radio’s plugs. And put the new Seicane car radio back into the dash.

10. Install two screws and trim piece.

11. Turn on the new car radio and have a comprehensive test.

 

So now do you have a general understanding of the installation on a 2003 2004 2005 2006 2007 -2011 Porsche Cayenne car radio? If you encounter any problems you cannot deal with independently, please don’t hesitate to consult your dealer, communicate with someone experience or turn to a professional for help. Besides, before installation, you should select an ideal car radio for your car. If you don’t know which kind of car radios can fit your car, you can refer to the following link which is a 2003 2004 2005 2006 2007 -2011 Porsche Cayenne car radio from Seicane.

https://www.seicane.com/2003-2004-2005-2006-2011-porsche-cayenne-android-autoradio-bluetooth-dvd-player-support-gps-sat-nav-audio-auto-a-v-1080p-video-mirror-link-dvr-steering-wheel-control-stereo-upgrade-s32546f

This modern car radio is running on the most advanced Android 7.1.1 operation system and a powerful quad-core CPU processor to enhance its capabilities and performance, so it will provide its user with a much smoother, easier and faster operation experience. Besides, it comes with both practical and entertainment features, including the built-in 3D GPS navigation system, FM/AM radio, Bluetooth hands-free calls, Bluetooth streaming music, DVD player, AUX, file management, etc.

With the assistance of the worldwide real-time GPS navigation system, you don’t have to worry about getting lost. Through turn-by-turn direction and voice prompts, you can easily know your current locations and navigate to your desired destinations. And with dual zone function, this unit enables you to freely listen to your favorite music while navigating, and the music can automatically switch to GPS voice.

Wish you like this unit and good luck to you!

17Aug 2017

How to Upgrade a 2007 2008 2009 2010 2011-2013 FIAT Fiorino Car Radio

⋅ Leave a Comment
2007 2008 2009 2010 2011-2013 FIAT Fiorino Car Radio after installation

Have you found that your factory radio is too outdated to be compatible with some modern features to meet your various needs in your car? If your answer toward this question is “yes”, then you can consider replace it with a new aftermarket car radio. To install a new aftermarket car radio in your car, you can find a detailed installation guide to help you. The following is a 2007 2008 2009 2010 2011-2013 FIAT Fiorino car radio installation guide, which can be taken as your reference.

2007 2008 2009 2010 2011-2013 FIAT Fiorino Car Radio after installation

2007 2008 2009 2010 2011-2013 FIAT Fiorino Car Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 2009 2010 2011-2013 FIAT Fiorino car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Insert the release keys in the slots of the original radio.

Insert the release keys in the slots of the original radio

Insert the release keys in the slots of the original radio

3. Pull outwards to remove the original radio.

Pull outwards to remove the original radio

Pull outwards to remove the original radio

4. Disconnect the connectors and cables behind to release the original radio.

Disconnect the connectors and cables behind to release the original radio

Disconnect the connectors and cables behind to release the original radio

5. Use a plastic removal tool to pry the cover and then release it.

Use a plastic removal tool to pry the cover and then release it

Use a plastic removal tool to pry the cover and then release it

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish you can get some inspiration from the above installation instruction. If you meet anu questions before or during the installation process, it is suggested that you should consult your dealer, communicate with someone experienced or turn to a professional for help. But if you think it hard for you to finish the whole upgrade process, you’d better go to a car radio upgrade center to ask a professional to help you install the new car radio. To help you select a suitable car radio, I would like to share a remarkable 2007 2008 2009 2010 2011-2013 FIAT Fiorino car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-gps-navigation-bluetooth-radio-head-unit-for-2007-2013-fiat-fiorino-support-usb-sd-obd2-1080p-aux-wifi-dvr-rearview-camera-s32538f

This amazing 2007 2008 2009 2010 2011-2013 FIAT Fiorino car radio from Seicane is loaded with the most intelligent and stable Android 7.1.1 operation and a quad-core CPU, and it also comes with a wide range of practical and entertainment features. So it can be regarded as the best replacement for your factory radio. Thanks to the worldwide real-time GPS navigation system, you can easily locate where you are and accurately be guided to your destinations through the turn-by-turn direction and voice prompts. And with dual zone function, this unit enables you to listen to radio/ USB/ SD music playback while navigating, which won’t have any negative influence on GPS function.

Wish this car radio be your best road companion. Good luck!

15Aug 2017

A Brief Introduction on a 2012 2013 2014 Skoda Octiva Car Radio Removal and Installation with an Aux Input Stereo Navigation

⋅ Leave a Comment
2012 2013 2014 Skoda Octiva Car Radio after installation

There is no denying that nowadays more and more car owners would like to pursue a wonderful driving experience. To achieve that goal, what you can do is to replace your factory radio with a brand new multifunctional car radio. Since a new car radio installation process is not so complicated that you can also try to install the new car radio by yourself under the help of an installation guide. The following is a 2012 2013 2014 Skoda Octiva car radio installation instruction from Seicane. If your car’s dashboard is the same as or similar to the image below, you can carefully follow this detailed installation instruction.

2012 2013 2014 Skoda Octiva Car Radio after installation

2012 2013 2014 Skoda Octiva Car Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2012 2013 2014 Skoda Octiva car radio installation instruction

1. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

1-1

1-1

1-2

1-2

2. Remove four screws that fixed the radio on the dashboard.

Remove four screws that fixed the radio on the dashboard

Remove four screws that fixed the radio on the dashboard

3. Softly release the original radio and take it out.

Softly release the original radio and take it out

Softly release the original radio and take it out

4. Unplug the connectors and cables at the back of the original radio.

Unplug the connectors and cables at the back of the original radio

Unplug the connectors and cables at the back of the original radio

5. Check all the accessories for the new Seicane car radio.

6. Connect the harnesses to the back of the new Seicane car radio.

7. Connect the Seicane car radio to your original stereo’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Wish the above installation instruction can do some favor for your installation. Whatever question you have about your car radio or your car, you can seek help from your dealer, someone experienced or a professional. Or you can straightly arrange a professional technician to help you install the new car radio. However, if you don’t know what kind of car radios can fit your car well, here I would like to share a remarkable 2012 2013 2014 Skoda Octiva car radio from Seicane to you. For more details, please click:

https://www.seicane.com/2012-2013-2014-skoda-octiva-android-radio-gps-navi-stereo-upgrade-support-bluetooth-music-dvd-player-usb-sd-wifi-1080p-video-dvr-auto-a-v-steering-wheel-control-s32703f

This car radio’s operation system has been upgraded to the most advanced Android 7.1.1 version and it has a powerful quad-core CPU processor, so this car radio can provide its users with its enhanced compatibilities and improved performance.

With the assistance of the high-end 3D GPS navigation system, you are able to know your current locations and navigate to your desired destinations through turn-by-turn directions and voice prompts. Additionally, this unit’s dual zone function enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Besides, this car radio comes with a smart 8 inch HD multi-touch screen with 1024×600 resolution, so it allows you to enjoy the best display effect when you are watching videos, TV programs, movies, etc as well as have a perfect view of the road ahead.

Wish you like this unit and good luck to you!

10Aug 2017

The Ultimate Instruction on a 2012 2013 RENAULT DUSTER Car Radio Stereo Audio System Head Unit Upgrade

⋅ Leave a Comment
2012 2013 RENAULT DUSTER Car Radio after installation

To get more convenience in your car, you can easily upgrade your factory radio with a new aftermarket car radio which can be compatible with many up-to-date features. If it is the first time for you to remove your factory radio and install a new car radio, you may have no ideas about how to deal with it. Here I would like to share a step-by-step 2012 2013 RENAULT DUSTER car radio installation guide from Seicane with you. Wish you can get some inspiration from it.

2012 2013 RENAULT DUSTER Car Radio after installation

2012 2013 RENAULT DUSTER Car Radio after installation

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2012 2013 RENAULT DUSTER car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Release the surrounded panel and the trim panel; please use a removal tool if necessary.

Release the surrounded panel and the trim panel; please use a removal tool if necessary

Release the surrounded panel and the trim panel; please use a removal tool if necessary

2-1

2-1

3. Disconnect connectors at the back of the panel.

Disconnect connectors at the back of the panel

Disconnect connectors at the back of the panel

4. Remove four screws that fixed the radio on the dashboard.

Remove four screws that fixed the radio on the dashboard

Remove four screws that fixed the radio on the dashboard

5. Softly take out the original car radio and disconnect connectors behind.

Softly take out the original car radio and disconnect connectors behind

Softly take out the original car radio and disconnect connectors behind

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

It is not abnormal if you meet any problems in the process of removal and installation on a    car radio. To solve these problems, we suggest you seek help from your dealer, someone experienced or a professional. If you still think it hard for you to finish the whole upgrade process, you can directly go to a car radio upgrade center to ask a technician to help you install the new car radio.

Besides, if you are searching online for an ideal car radio, you can check out the following link which is a remarkable 2012 2013 RENAULT DUSTER car radio from Seicane.

https://www.seicane.com/oem-2012-2013-renault-duster-android-dvd-player-gps-navigation-radio-stereo-support-bluetooth-aux-audio-system-1080p-video-wifi-usb-rearview-camera-s32787f

This unit is running on the intelligent Android 7.1.1 operation system and a high-quality quad-core CPU processor to facilitate its operation and enhance its capabilities.

The high-precision 3D GPS function is specially built in this unit, which enables you to have the most suitable way and short cut to get to your destinations through turn-by-turn directions and voice prompts. And thanks to this unit’s dual zone function, you can listen to your favorite music under GPS mode.

Equipped with a 7 inch HD 1024*600 multi-touch screen, this unit enables you to enjoy the best display effect of videos, TV programs, movies, etc as well as have a perfect view of the road ahead.

Wish you have an unforgettable driving experience accompanied by this car radio. Good luck to you!

08Aug 2017

How to Upgrade a 2008 2009 2010 2011 Toyota Rav4 Car Radio with Bluetooth GPS Navigation Proficiently

⋅ Leave a Comment
2008 2009 2010 2011 Toyota Rav4 Car Radio after installation

Now there are more and more options for you to upgrade your car’s capabilities and performance. And one of the most popular ways is to remove your factory radio and install a new aftermarket car radio in your car. With such an amazing car radio installed in your car, you can not only get to your destinations thanks to the most accurate direction but also enjoy a lot of fun on the way. The following is a 2008 2009 2010 2011 Toyota Rav4 car radio installation guide from Seicane which I would like to share with you. If you have the same or similar dashboard, you can refer to this guide carefully.

2008 2009 2010 2011 Toyota Rav4 Car Radio after installation

2008 2009 2010 2011 Toyota Rav4 Car Radio after installation

Before and during installation, you should notice:

1.Before connecting,please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire,so when replace the fuse, please consult the professional.

7.For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 2011 Toyota Rav4 car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool

Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights

Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch

Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch

Unplug the switch

6. Remove four screws.

Remove four screws

Remove four screws

6-1

6-1

7. Pull out the factory radio.

Pull out the factory radio

Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio

The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio

Remove 8 screws from original car radio

9-1

9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio

Remove 2 screws at the top of the new radio

10-1

10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio

Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs

Plug into factory plugs

13. All plugs after connection.

All plugs after connection

All plugs after connection

13-1

13-1

14. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

15. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

16. Connect the Seicane car radio to your original car radio’s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

That’s all about how to remove and install a 2008 2009 2010 2011 Toyota Rav4 car radio. Wish you can get some help from the above installation guide. If you have any doubts, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to remove and install the car radio, you can directly go to a car radio upgrade center to arrange a professional technician to help you.

To help you effectively select an ideal car radio for your beloved car, here I would like to recommend a remarkable 2008 2009 2010 2011 Toyota Rav4 car radio from Seicnae to you. For more details, please click:

https://www.seicane.com/2008-2009-2010-2011-toyota-rav4-dvd-player-android-radio-gps-head-unit-support-navigation-obd2-usb-sd-dvr-bluetooth-music-wifi-digital-tv-mirror-link-steering-wheel-control-s32790f

Specially designed for 2008 2009 2010 2011 Toyota Rav4, this car radio is running on the most advanced Android 7.1.1 operation system and a powerful quad-core CPU processor to enhance its capability and performance. Therefore, you are able to create a more convenient and comfortable in-car environment as well as embrace a brand new driving experience. And you can regard it as one of the best choices to replace your factory radio.

After you get this up-to-date car radio installed in your beloved car, you will get access to a lot of features, which mainly include high-accuracy GPS navigation system, DVD player, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, AUX, file management. Thanks to these features, you are able to have a more convenient and relaxing driving experience.

Wish you have a wonderful in-car experience accompanied by this car radio. Good luck to you!

01Aug 2017

How to Remove and Install a 2004 2005 2006 2007 2008-2009 Mazda 3 GPS Bluetooth DVD Car Radio Easily

⋅ Leave a Comment
2004 2005 2006 2007 2008-2009 Mazda 3 GPS Bluetooth DVD Car Radio after installation

Nowadays, there is a trend that more and more car owners install a new car radio to get the latest convenience and enjoyment. Do you also want to upgrade your factory radio? If yes, you might as well find a correct installation guide to help you. The following is a 2004 2005 2006 2007 2008-2009 Mazda 3 car radio installation guide. If you have the same dashboard and plan to replace your factory radio with a brand new car radio, you can carefully read this guide for its installation.

2004 2005 2006 2007 2008-2009 Mazda 3 GPS Bluetooth DVD Car Radio after installation

2004 2005 2006 2007 2008-2009 Mazda 3 GPS Bluetooth DVD Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2004 2005 2006 2007 2008-2009 Mazda 3 car radio installation guide

1. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

1-1

1-1

2. Remove two screws that fixed the car radio on the dashboard.

Remove two screws that fixed the car radio on the dashboard

Remove two screws that fixed the car radio on the dashboard

3. Take out the original car radio.

Take out the original car radio

Take out the original car radio

4. Unplug connectors at the back of the original car radio.

Unplug connectors at the back of the original car radio

Unplug connectors at the back of the original car radio

4-1

4-1

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Now do you know how to remove the original car radio and install the new car radio for 2004 2005 2006 2007 2008-2009 Mazda 3? If you encounter any problems, you are welcome to seek advice from your dealer, communicate with someone experienced or turn to a professional for help. But if you are still searching online for an ideal car radio for your beloved car, I’d like to share an amazing 2004 2005 2006 2007 2008-2009 Mazda 3 car radio from Seicane with you. Here comes the link, please click:

https://www.seicane.com/2004-2005-2006-2009-mazda-3-android-gps-navigation-car-dvd-player-radio-bluetooth-support-usb-sd-3g-wifi-backup-camera-dvr-obd2-steering-wheel-control-s32791f

This car radio, specially designed for 2004 2005 2006 2007 2008-2009 Mazda 3, which can be regarded as one of the best choices to replace your factory radio. With it installed in your car, you are able to be offered the best services thanks to its more stable Android 6.0 operation system and a quad-core CPU processor.

With the assistance of the high-end 3D GPS navigation system, you can easily know your current locations and navigate to any locations you would like to go to through turn-by-turn directions and voice prompts. And thanks to dual zone function, this car radio enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS function.

Besides, this car radio comes with a large 7 inch 1024*600 multi-touch screen. With it, you can enjoy the best display effect when you turn on DVD player to watch videos, TV programs, movies, etc as well as have a good view of the GPS map, which is beneficial to your in-car life.

If you like this unit, please don’t hesitate to take it and install it in your car. Wish you all the best!