What do you think is the most direct way to upgrade both your car interior environment and your driving experience? In my opinion, the most direct way is to replace your factory radio with a new aftermarket car radio which is integrated with a wide range of upgraded and new features. To help you understand the installation process, I’d like to share a 2000-2006 Toyota Corolla EX car radio installation instruction with you. If you have the same or similar dashboard, you might as well take it as a reference.
2000-2006 Toyota Corolla EX Bluetooth DVD Car Radio after installation
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2000-2006 Toyota Corolla EX car radio installation instruction
1. Remove two trim panels at each side of the center console and set it aside.
Remove two trim panels at each side of the center console and set it aside
2. Remove the top panel and set it aside.
Remove the top panel and set it aside
3. Remove 4 screws holding the unit with a Phillips screwdriver.
Remove 4 screws holding the unit with a Phillips screwdriver
4. Gently take out the panel on the radio interface.
Gently take out the panel on the radio interface
5. Take out the radio and disconnect cables at back of it.
Take out the radio and disconnect cables at back of it
6. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
7. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
8. Connect the Seicane car radio to your original car radio’s plugs.
9. Put the new Seicane car radio into the dash.
10. Turn on the new Seicane car radio and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
So now do you have a general understanding of a 2000-2006 Toyota Corolla EX car radio installation process? If you have any questions, you can contact your dealer, communicate with someone experienced or seek help from a professional. If you think it too hard for you to finish the installation, you’d better arrange a technician to help you install the new car radio. To help you select a suitable car radio, here I’d like to recommend an amazing 2000-2006 Toyota Corolla EX car radio from Seicane to you. For more details, please click:
This amazing car radio, suitable for 2000-2006 Toyota Corolla EX comes with a wide range of practical and entertainment features to meet your different needs in your car.
With the help of the high-accuracy 3D GPS navigation system, you won’t get lost any longer. When you take full advantage of features offered including landmark building display, 3D street view, destination search and turn-by-turn voice directions, etc, you are able to know your current locations and have the best route plan to reach your desired destinations. Besides, you can listen to some beautiful music while navigating thanks to dual zone function.
What’s more, through the connection between your Bluetooth-enabled mobile phone and this car radio, with remaining your hands on the steering wheel and keeping your eyes on the road ahead, you can freely dial, answer, reject and mute hands-free calls as well as stream music from your mobile phone. So you can gain a lot of convenience and joyfulness.
Wish you like it and take it along with your driving. Good luck to you!
Recent Comments