As far as I am concerned, an ideal car radio should not only come with practical features to bring convenience for a car owner but also meet the car owner’s entertainment needs to offer him a pleasant driving experience. If you think your old radio is not ideal enough, it is wise of you to quit it and install a new multifunctional one. This article mainly introduces some steps to upgrade a 2011 2012 2013 2014-2016 Honda CITY car radio. If you are interested in it, you can read it carefully.
2011 2012 2013 2014-2016 Honda CITY car radio after installation
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. Please prepare a lever and a screwdriver before the removal and the installation.
5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2011 2012 2013 2014-2016 Honda CITY car radio installation instruction
1. The original car radio.
The original car radio
2. Remove screw below the radio and then pry the panel with a plastic removal tool.
Remove screw below the radio and then pry the panel with a plastic removal tool
3. Remove the storage pocket and then unscrew two hidden screws with a screwdriver.
Remove the storage pocket and then unscrew two hidden screws with a screwdriver
4. Pry the panel with a plastic removal tool and then remove it.
Pry the panel with a plastic removal tool and then remove it
5. Take out the original radio and disconnect the connectors at the back of the radio.
6. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
7. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
8. Connect the Seicane car stereo to your original stereo’s plugs.
9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car stereo into the dash.
11. Put everything into their original place. All the installation is done.
If you comes across any problems, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. As for the selection of an ideal car radio, if you have no ideas, here I would like to share a remarkable 2011 2012 2013 2014-2016 Honda CITY car radio from Seicane with you. For more details, please click:
This car radio comes with a wide range of practical and entertainment features, mainly including 3D GPS navigation system, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, SD card or USB connection, file management, etc.
Under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this car radio so as to get access to both Bluetooth hands-free phone calls and Bluetooth streaming music without taking your hands off the steering wheel. Besides, thanks to this unit’s built-in high-end 3D GPS navigation system, you are able to easily know your current locations and find the right way to reach any locations you would like to go to under the guidance of the turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.
Wish you like this remarkable car radio and good luck to you!
Recent Comments