Monthly Archives: November 2018

You are browsing the site archives by month.
2011 2012 2013 2014 BMW X5 E70 X6 E71 CCC car radio after installation

Would you like to own a wonderful driving experience? Or would you like to accurately and punctually find and reach your destinations? And would you like to relax both yourself and your passengers at the back seats all the way? If your answers towards these questions are both “yes”, then you can consider replacing your factory radio with a new aftermarket car radio in your beloved car. The following is a 2011 2012 2013 2014 BMW X5 E70 /X6 E71 CCC car radio installation instruction from Seicane. You can carefully refer to it if you own the same or similar dashboard.

2011 2012 2013 2014 BMW X5 E70 X6 E71 CCC car radio after installation

2011 2012 2013 2014 BMW X5 E70 X6 E71 CCC car radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2011 2012 2013 2014 BMW X5 E70 /X6 E71 CCC car radio installation instruction

1. Press the button that indicated so as to open the glove box.

Press the button that indicated so as to open the glove box

Press the button that indicated so as to open the glove box

1-1

1-1

2. Use a pry tool to pry loose the air vent dash trim.

Use a pry tool to pry loose the air vent dash trim

Use a pry tool to pry loose the air vent dash trim

2-1

2-1

3. Pull out the air-conditioning vent and disconnect the plugs connected behind it.

Pull out the air-conditioning vent and disconnect the plugs connected behind it

Pull out the air-conditioning vent and disconnect the plugs connected behind it

3-1

3-1

4. Then you are going to come the side and pull out the one switch for the actual glove box compartment.

Then you are going to come the side and pull out the one switch for the actual glove box compartment

Then you are going to come the side and pull out the one switch for the actual glove box compartment

5. Use a screwdriver to remove the two screws that fix the original car radio dash trim.

Use a screwdriver to remove the two screws that fix the original car radio dash trim

Use a screwdriver to remove the two screws that fix the original car radio dash trim

5-1

5-1

6. Remove two clips that are behind this radio face.

Remove two clips that are behind this radio face

Remove two clips that are behind this radio face

6-1

6-1

7. Remove four screws that fix the original car radio and pull it out from the dash. Then unplug the connectors and wires behind the car radio.

Remove four screws that fix the original car radio and pull it out from the dash. Then unplug the connectors and wires behind the car radio

Remove four screws that fix the original car radio and pull it out from the dash. Then unplug the connectors and wires behind the car radio

8. Unscrew the screws that fix the original display screen and then remove the screen.

Unscrew the screws that fix the original display screen and then remove the screen

Unscrew the screws that fix the original display screen and then remove the screen

9. Disconnect the connectors at the back of the screen.

Disconnect the connectors at the back of the screen

Disconnect the connectors at the back of the screen

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

That’s the whole removal and installation process of a 2011 2012 2013 2014 BMW X5 E70 /X6 E71 CCC car radio. If there is any problem too complicated for you to deal with, you can contact your dealer, communicate with someone experienced or straightly go to a car radio upgrade centre to have the new car radio installed by a professional technician.While for the car radio selection, if you don’t know which kind of car radios can fit your car well, I’d like to share a fabulous  car radio from Seicane with you. For more details, please click:

https://www.seicane.com/touch-screen-bmw-x5-e70-head-unit-gps-navigation-system-with-ipod-usb-sd-aux-rearview-canbus-srd-8825

With this car radio installed in your beloved car, almost all your needs can be me in car since this unit comes with a wide range of practical and entertainment features, mainly including 3D GPS navigation, FM/AM radio, Bluetooth hands-free calls, Bluetooth streaming music, file management, steering wheel control, etc. And as long as you make full use of these features, you will enjoy great convenience and enjoyment to embrace a new driving experience.

Under the guidance of the turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation, you can easily locate where you are and find the right way to reach your ideal destinations, so you will not get lost any longer even you are driving around different places and have no sense of directions. .

Wish you like this unit and good luck to you!

2009-2015 BMW X1 E84 car radio after installation

If you would like to improve your driving experience, you can think about removing your factory radio and installing a new aftermarket car radio. While as for the installation, you can search online for a related car radio installation instruction to help you with the installation. The following is a 2009 2010 2011 2012-2015 BMW X1 E84 car radio installation instruction from Seicane, which will provide you with a general understanding of car radio installation. If you own the same or similar dashboard, you can take this instruction as a reference.

2009-2015 BMW X1 E84 car radio after installation

2009-2015 BMW X1 E84 car radio after installation

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2009 2010 2011 2012-2015 BMW X1 E84 car radio installation instruction

1. The original dash.

The original dash

The original dash

2. Use a plastic pry tool to loose the panel along with the air vent, and then remove this panel.

Use a plastic pry tool to loose the panel along with the air vent, and then remove this panel

Use a plastic pry tool to loose the panel along with the air vent, and then remove this panel

2-1

2-1

3. Open the panel and disconnect the harzard light,door lock and other connectors at the back.

Open the panel and disconnect the harzard light,door lock and other connectors at the back

Open the panel and disconnect the harzard light,door lock and other connectors at the back

4. Remove the two screws that fix the top panel and then remove this panel.

Remove the two screws that fix the top panel and then remove this panel

Remove the two screws that fix the top panel and then remove this panel

4-1

4-1

5. Pop out the panel around the gear shift and then remove this panel.

Pop out the panel around the gear shift and then remove this panel

Pop out the panel around the gear shift and then remove this panel

6. Unplug the connectors at the back of the climate control.

Unplug the connectors at the back of the climate control

Unplug the connectors at the back of the climate control

7. Unscrew the screws that are holding the radio and then gently remove it.

Unscrew the screws that are holding the radio and then gently remove it

Unscrew the screws that are holding the radio and then gently remove it

8. Disconnect the connectors or cables at the back of the car radio.

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for your installation. If you have any problems, you can contact your dealer, communicate with someone experienced or turn to a professional . Or you can straightly go to a car radio upgrade center to arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to carefully select an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link, which is an amazing 2009 2010 2011 2012-2015 BMW X1 E84 car radio from Seicane.

https://www.seicane.com/android-2009-2015-bmw-x1-e84-hd-touchscreen-car-radio-head-unit-gps-navigation-bluetooth-support-rearview-camera-steering-wheel-control-usb-wifi-mirror-link-obd2-s028219

With this intelligent car radio installed in your car, almost all your needs can be met as long as you make full use of this unit’s practical and entertainment features.

Even you don’t have a good sense of directions, you won’t get lost thanks to this unit’s worldwide real-time GPS navigation system. According to the turn-by-turn directions and voice prompts, you can easily locate where you are and find the optimal route option to arrive at any locations you would like to go to. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.
What’s more, through the Bluetooth connection between this unit and your Bluetooth-enabled mobile phone, you can freely dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlists. So, you will gain a lot of convenience and joyfulness in the driving. Thus, you can get a lot of convenience and joyfulness in the driving process.

Wish you like this unit and good luck to you.

2013 2014 2015 2016 BMW 5 Series F10 F11 NBT car radio after installation

If you would like to drive a car to travel around a city that you are unfamiliar with, you must need high precision GPS navigation function in your car. However, your factory radio may not be advanced enough to be compatible with worldwide real-time GPS navigation function. In that case, it is wise of you to replace your factory radio with a brand new multifunctional car radio for your beloved car. The following is a 2013 2014 2015 2016 BMW 5 Series F10/F11 NBT car radio installation instruction from Seicane which can be taken as your reference.

2013 2014 2015 2016 BMW 5 Series F10 F11 NBT car radio  after installation

2013 2014 2015 2016 BMW 5 Series F10 F11 NBT car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2013 2014 2015 2016 BMW 5 Series F10/F11 NBT car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic flat pry tool to pry the air vent panel.

Use a plastic flat pry tool to pry the air vent panel

Use a plastic flat pry tool to pry the air vent panel

3. Use a screwdriver to remove the screws that fix the original car radio panel.

Use a screwdriver to remove the screws that fix the original car radio panel

Use a screwdriver to remove the screws that fix the original car radio panel

4. Remove the car radio panel and then disconnect the connectors at the back of it.

Remove the car radio panel and then disconnect the connectors at the back of it

Remove the car radio panel and then disconnect the connectors at the back of it

5. If you need to remove the original car radio, then just remove these mounting screws and then remove the car radio. Then you should disconnect the connectors at the back of it.

If you need to remove the original car radio, then just remove these mounting screws and then remove the car radio. Then you should disconnect the connectors at the back of it

If you need to remove the original car radio, then just remove these mounting screws and then remove the car radio. Then you should disconnect the connectors at the back of it

6. If you need to remove the screen, then just unscrew the two mounting screws and then remove the screen. And then unplug the connectors or cables at the back of it.

If you need to remove the screen, then just unscrew the two mounting screws and then remove the screen. And then unplug the connectors or cables at the back of it

If you need to remove the screen, then just unscrew the two mounting screws and then remove the screen. And then unplug the connectors or cables at the back of it

6-1

6-1

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Above is the whole removal and installation process on a 2013 2014 2015 2016 BMW 5 Series F10/F11 NBT car radio. If you meet any problems, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio.

If you don’t know how to select an ideal car radio for your beloved car, here I would like to share a remarkable 2013 2014 2015 2016 BMW 5 Series F10/F11 NBT car radio from Seicane with you. For more details, please click:

https://www.seicane.com/hd-touchscreen-android-aftermarket-radio-head-unit-for-2013-2014-2015-2016-bmw-5-series-f10-f11-nbt-car-stereo-gps-navigation-system-bluetooth-phone-wifi-support-obdii-dvr-1080p-video-steering-wheel-control-s028218

With this car radio installed in your car, you can freely get access to a wide range of practical and entertainment features, therefore, almost all your different needs can be met in car thanks to this unit.

This unit comes with 3D GPS navigation function of high precision, so according to its turn-by-turn directions and voice prompts, you can easily locate where you are and navigate to any locations you would like to go to. Additionally, this unit also has dual zone function, so you can freely enjoy your favorite music while navigating and the music will automatically switch to GPS voice.

What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, without taking your hands off the steering wheel control for a long time, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlists. Thus,  you will gain a lot of convenience and enjoyment.

What are you waiting for? If you like this unit, please don’t be hesitated to add this car radio to your shopping cart right now.