Monthly Archives: February 2019

You are browsing the site archives by month.
2011-2015 KIA K2 RIO car radio after installation

If your factory radio cannot support a lot of entertainment options to meet your different needs, it is high time for you to consider removing the factory radio and installing the new aftermarket car radio. And if you are a car owner of a 2011-2015 KIA K2 RIO, and would like to make the car radio replacement on your own, you can refer to the following 2011-2015 KIA K2 RIO car radio installation instruction. Wish you can get some help from it.

2011-2015 KIA K2 RIO car radio after installation

2011-2015 KIA K2 RIO car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2011-2015 KIA K2 RIO car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic removal tool to release the top panel.

Use a plastic removal tool to release the top panel

Use a plastic removal tool to release the top panel

3. Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it.

Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it

Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it

3-1

3-1

4. Unscrew the screws that are holding the radio on the dashboard.

Unscrew the screws that are holding the radio on the dashboard

Unscrew the screws that are holding the radio on the dashboard

5. Take out the radio gently.

Take out the radio gently

Take out the radio gently

6. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio

Unplug the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

That’s the whole installation process of a 2011-2015 KIA K2 RIO car radio. One one hand, if you have any questions, you are welcomes to contact your dealer, communicate with someone experienced or turn to a professional for help. On the other hand, if you think it too hard for you to finish the whole installation process, you’d better arrange a professional technician to help you install it.

Anyway, before installation, please do carefully select an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link which is a great 2011-2015 KIA K2 RIO car radio from Seicane.

https://www.seicane.com/android-touchscreen-2011-2012-kia-k2-rio-radio-gps-navigation-system-with-dvr-bluetooth-steering-wheel-control-backup-camera-mirror-link-obd2-digital-tv-s18k212

This amazing car radio is upgraded to run on the stable Android 6.1 operation system and a powerful quad-core CPU processor, so you are able to have a much smoother, faster and easier operation experience.

With the assistance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system of high accuracy, you can make your Bluetooth-enabled mobile phone sync with this unit for hands-free phone calls and streaming music, which not only bring you the greatest convenience but also add enjoyment to your trip.

Additionally, this unit’s Bluetooth function enables you to get access to both Bluetooth hands-free phone calls and Bluetooth streaming music as long as you make your Bluetooth-enabled mobile phone connect with this car radio.

If you like this unit, don’t hesitate to add it to your shopping cart. Good luck to you!

The installation and removal tutorial guide for 2004 2005 2006-2010 Toyota Sienna car Stereo

With the cars popularity and the flexible roads construction, the latest car head unit with positioning, navigation and entertainment functions meets the needs of drivers and becomes the basic equipment option for a car environment upgrade.Unsurprisingly many owners are not clear about the installation and removal. That’s the motivation why i could like to write this article. If your have no idea how to exchange the car radio but your car matches 2004 2005 2006-2010 Toyota Sienna car GPS Navigation system. Please go over this stepped article,you probably will figure our how to deal with it. 

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car well. Please take great care of the dashboard to avoid scratching it during its detachment and installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:   http://www.seicane.com/car-dvd-dismantling-device-srd-400

The installation and removal tutorial guide for 2004 2005 2006-2010 Toyota Sienna car Stereo

Step 1. Unplug the vertical panels on left and right as marked with removal tool.

Step 2.Disconnect the wiring behind the both left and right panels.

Step 3.Remove the center channel speaker grill panel above the stereo.

Step 4.Then disconnect the speaker wiring harness.

Step 5.Remove the four 10-mm hex head nuts as marked(Left side as 5-1,Right side as 5-2)

L: 5-1

L: 5-1

R: 5-2

R: 5-2

Step 6.Disconnect the wiring back and gradually pull the stereo straight out.

Step 7.If necessary, transfer the bracket from each side of the old stereo to the replacement.

If your replacement stereo did not come with mounting brackets then you will need to remove the ones from the old one and place them on the new. There are four 10-mm headed hex screws on each of the two brackets.

Step 8.Check all the accessories for the new Seicane car radio.

Step 9. Connect the harnesses to the back of the new Seicane car radio.

Step 10. Connect the Seicane car radio to your original car radio ‘s plugs.

Step 11. Turn on the new Seicane car radio to have a careful check if everything works well.

Step 12.Put the new Seicane car radio into the dash.

Step 13. Put everything into their original place. All the installation is done.

Now you may be able to install a new radio for you car under the guidance of this detailed installation guide especially for a 2004 2005 2006-2010 Toyota Sienna car Radio.   If not, you can ask a professional for help instead.Also in case you’re not sure what car radio fits yours. I’d like to recommend this advanced 2004-2010 Toyota Sienna car radio from Seicane to you. Here’s the link, please go ahead and check it for details:

https://www.seicane.com/2004-2005-2006-2010-toyota-sienna-android-radio-gps-navigation-hd-touch-screen-head-unit-with-bluetooth-wifi-music-swc-usb-support-sd-carplay-dvd-1080p-video-h2077

This great 2004 2005 2006-2010 Toyota Sienna car DVD Player comes with the latest Android Radio, RAM 2GB \ ROM 32GB \ Quad core , Support Carplay,RDS, SWC, XM radio APP etc. It has an attractive interface for you to improve your in-car environment, you can change the wallpaper and car logo according to your own preference.The car stereo is equipped with worldwide real-time navigation function of high accuracy. With current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn voice directions, it will be your perfect road companion. Perfectly enjoy the new car stereo.