If you are desired of having a more comfortable and convenient car interior environment as well as an unforgettable and relaxing driving experience, you might as well think about replacing your factory radio with a brand new multifunctional car radio. In the following article, I will show you removal and installation instructions for a 2015 Kia Soul car radio. If you have the same or similar dashboard, it is suggested that you can refer to these instructions.
2015 Kia Soul car radio after installation
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2015 KIA SOUL Car Radio Installation Instruction
1. First remove the vent panel on the top of the radio with a pry tool, and set it aside.
First remove the vent panel on the top of the radio with a pry tool, and set it aside
2. Then remove the trim panel around the radio with a pry tool, and set it aside.
Then remove the trim panel around the radio with a pry tool, and set it aside
3. Unscrew three screws as the picture shows.
Unscrew three screws as the picture shows
4. Pull out the air condition control without disconnect the harness behind it.
Pull out the air condition control without disconnect the harness behind it
5. Unscrew four screws holding the radio in dashboard.
Unscrew four screws holding the radio in dashboard
6. Unplug the connectors behind the radio.
Unplug the connectors behind the radio
7. Pull out the original car radio.
Pull out the original car radio
8. Disconnect all connectors at the back of the original car radio.
9. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
10. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
11. Connect the Seicane car radio to your original car radio ‘s plugs.
12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13.Put the new Seicane car radio into the dash.
14. Put everything into their original place. All the installation is done.
That’s all about how to remove and install a 2015 KIA SOUL car radio. If you have any problems, please feel free to contact your dealer, communicate with someone expereicned or turn to a professional professional technician for help. Besides, for avoiding damage to either the new car radio or the car, you can directly go to a car radio upgrade upgrade center to have the car radio installed by a skilled technician.
Anyway, if you are still looking for an ideal car radio for your car, here I would like to recommend a remarkable 2015 KIA SOUL car radio from Seicane to you. For more details, please click:
Specially designed for 2015 KIA SOUL, this remarkable car radio is running on the stable and smart Android 6.0 operation system and a strong quad-core CPU processor which will offer you a brand new driving experience since this unit comes with high performance and configurations.
Built in GPS module with dual zone function, you are able to know where you are now and navigate to your desired destinations. And while navigating, you can freely listen to your favorite music which is played under GPS mode thanks to this unit’s dual zone function, and the music will automatically switch to GPS voice.
Additionally, Bluetooth chips built inside makes it support Bluetooth hands-free call, and Bluetooth streaming music playing from phone.
Wish you like this unit and good luck to you!
Recent Comments