As the user of Chevrolet? What is the first considerable point of improving your in-car life? Is it about driving feeling or speed? Or is it about the entertainment ? As for me, I would like to listen music and watch videos as to add much fun to my driving trip, which pushes me to install a car stereo for my Chevrolet S10. At first I think it is too hard for me to finish it, but after I read the relative articles about it, I have complete the whole process without any pressure. To help those who have the same confuse like me, I want to share some experienced steps about the installation of Chevrolet head unit, which may give you some inspiration.
Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.
Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.
2012 2013 2014 Chevrolet S10 stereo removal
1.Gently lever the upper trim housing panel from the dash with a removal tool.
2.Lever edges of side panel,release and reposition the shifter.
3.Make out 2 screws(this screw and the other corresponding one) from the storage pocket,remove car storage.
4.Make out 4 screws which are on the accessory control panel.
5.When you remove this very tough panel you should be patient and the clips will loosen.,then let panel hang to side.
6.Make out 2 screws from radio control panel,unplug the radio control panel.
7.Take out the really strange blue clip absolutely before removing the other connector,and remove the latter one.
8.Get out 2 screws which are on the radio chassis,and remove the other 2 screws which are near the top of the stereo,in order to fasten the screen.
9.Make screen out by pulling,and get behind clip out.
10.There are still 2 screws on stereo,remove them from car head unit.
11.Take stereo and connectors out.
12.Read installation instructions that within you new bought stereo,precisely make cables connection between new stereo with car.
13.After correct connection,install your new unit into your car and turn on it to test whether your actions are all right.
13.Fix 2 screws to the stereo and install the dvd player in position.
14.Make 2 screws back to the place near top of the stereo,and 2 screws to radio chassis.
15.Make other parts back to original place and don’t forget to firm their screws back to them to fix corresponding machine.
After finishing these 15 steps, it can be said that you have basically finished this difficult project on your own. However, not every beginner can finished perfectly in their first-time try, so if you meet any problems, you can ask for your car dealer for help or you can cost some money to buy the good service offline. But I would like to recommend you to go to the Internet to search the answer as it can save money and time as long as you have network and phone. There is a relative link of Chevrolet Android unit from Seicane, which has engaged in making car receivers for many years.And it covers all of the information including installation videos and buying guide.
Do you want to know more interesting information about it?If you do, please visit it now.
Recent Comments