If you find the factory radio is far enough to meet all your needs in a car, then it’s time for you to replace it with a modern car radio which can be compatible with a lot of practical features and entertainment options to provide you with the most convenience and enjoyment. Look at the picture below, it’s a latest 2002-2010 Chevy Chevrolet OPTRA radio from Seicane. If you have the same or similar dashboard as the picture above, you can read the following 2002-2010 Chevy Chevrolet OPTRA radio installation instructions carefully to help with the installation.
2002-2010 Chevy Chevrolet OPTRA radio after installation
Here are some tips for you before the installation:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
2002-2010 Chevy Chevrolet OPTRA radio installation guide
- Remove the trim panel. There are several parts of the trim panel. You should remove them one by one. First remove the trim panel which is around the screen. Then, remove the trim panel which is next to the CD player. Remove the screws on the trim panel before you pry it from the dashboard. And put them away and keep every part well so that you can install them back to the original place perfectly.
2002-2010 Chevy Chevrolet OPTRA radio installation step 1
- Unscrew the screws on the units and put them away.
2002-2010 Chevy Chevrolet OPTRA radio installation step 2
- Take the original radio out of the dash.
2002-2010 Chevy Chevrolet OPTRA radio installation step 3
- Disconnect the connectors at the back of the original radio.
2002-2010 Chevy Chevrolet OPTRA radio installation step 4
- Install the new Seicane radio. The installations of different units are different. You should refer to the installation instruction from the dealer and connect the new Seicane radio to the original wiring harness. If it needs a wiring harness adaptor, connect the adaptor to the original wiring harness first, then, connect the adaptor to the new Seicane radio.
2002-2010 Chevy Chevrolet OPTRA radio installation step 5
- Turn on the new Seicane radio and test it. Connect the negative cable on the battery and turn on the new Seicane radio to test all the functions in it. If everything’s good, fix the screen by putting it hard to the dashboard and fix the DVD player with screws.
2002-2010 Chevy Chevrolet OPTRA radio installation step 6
- Install the trim panel. Install the trim panel which was next to the CD player before back to its original place.
Wish the above step-by-step installation guide can be helpful for you. If you think it too hard to understand all the steps, it’s strongly suggested you ask a professional for help. You can consult your dealer as well. You can also go to a car stereo upgrade center to have it installed.
In addition, you need to make sure you have a correct radio which can fit your car perfectly. If you don’t have one, I’d like to recommend an ideal 2002-2010 Chevy Chevrolet OPTRA radio from Seicane to you:
This amazing Chevy Chevrolet OPTRA radio is equipped with the most powerful RK3188 1.6 GHz Cortex A9 Quad-core CPU and the advanced Android 4.4.4 version ensures a smoother and faster performance than ever before. You are enabled to get to your destination easily with the most accurate directions of the GPS system. The Bluetooth technology makes you possible to sync your cell phones with this unit for hands-free calls and streaming music for a safe and pleasant journey.
To upgrade your factory radio with this fantastic Chevy Chevrolet OPTRA radio for a different driving experience, it’s the time right now! Good luck to you!
Recent Comments