Perhaps some of car owners think it a job only done by a technician to install a new car radio, so many of them go to a car stereo upgrade center to have their stereos successfully installed but cost a certain amount of money as well. To save some money, you can finish the installation on your own with a correct installation guide. The picture below is a modern 2009-2014 Honda Odyssey car radio from Seicane, if you have the same dashboard, you can refer to the following installation guide.
2009-2014 Honda Odyssey Radio after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2009-2014 Honda Odyssey car radio installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
The above is the installation guide for a 2009-2014 Honda Odyssey car radio. Wish you can learn something useful from it. If you meet any difficulties during the whole process, you’d better ask a professional technician to help you for the first time.
So have you found an ideal radio for your 2009-2014 Honda Odyssey yet? If not, I’d like to share a great 2009-2014 Honda Odyssey gps bluetooth car radio from Seicane for you. You may check out the following link for more deatails.
Upgraded to the latest firmware and software, this amazing 2009-2014 Honda Odyssey car radio is up-to-date enough to be the best replacement for your factory radio. The advanced GPS navigation system of this radio makes it easier for you to have the best route options to reach your destinations. And you are able to get access to hands-free calls and streaming audio through the wireless Bluetooth connection between your enabled mobile phone and this car radio. Besides, some entertainment features are also supported to make your long trip filled with joyfulness. Just install this 2009-2014 Honda Odyssey car radio in your car and enjoy your brand new driving experience in the future!
Recent Comments