Taking a multifunctional car stereo on all trips can not only guide you to any location correctly but also entertain both yourself and your passengers all the way. Some car owners may worry that it’s too complicated to install a new aftermarket radio. Actually, the installation is not too complicated. The following is a detailed 2002-2007 Jeep Grand Cherokee Liberty Patriot Wrangler car stereo installation guide from Seicane for your reference. If you are car owner of a 2002-2007 Jeep Grand Cherokee Liberty Patriot Wrangler, then this article is worth your careful reading.
2002-2007 Jeep Grand Cherokee Liberty Patriot Wrangler car stereo after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2002-2007 Jeep Grand Cherokee Liberty Patriot Wrangler car stereo installation guide
1.Loosen the trim panel with a lever.
1.Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.
3.Remove the four screws which are holding the unit with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.
4.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
5.Connect the new wiring harness adaptor to the car, then, to the unit.
5-1.Connect the new wiring harness adaptor to the car, then, to the unit.
5-2.Connect the new wiring harness adaptor to the car, then, to the unit.
6.Connect the wire as the user manual shows and put the new unit into the dash.
6.Connect the wire as the user manual shows and put the new unit into the dash.
7.Turn on the new unit and have a test if the new Seicane stereo is working without problem..
8.Put trim panel back on your new Seicane stereo after the normal test.
To let your new stereo be well installed in your car, please make clear about every step before you start t to install the Jeep Grand Cherokee Liberty Patriot Wrangler car stereo. If you don’t understand any of the steps, you can ask your dealer or a professional for help. Besides, you need to check the compatibility of your new stereo with your car. If you have no idea, I’d like to recommend a great 2002-2007 Jeep Grand Cherokee Liberty Patriot Wrangler car stereo from Seicane to you, please click for more details:
With this intelligent Jeep Grand Cherokee Liberty Patriot Wrangler car stereo in your car, you can play DVDs, CDs, VCDs, bluetooth music, Ipod, FM/AM radio to keep both you and your passengers entertained all the way. The latest 3D GPS navigation system enables you to go anywhere without getting lost. By simply pairing with your enabled mobile phone, you can get the hands-free calling convenience and streaming music enjoyment on all trips.
Recent Comments