With the improvement of technology, you can easily find what you need in your car in new aftermarket car stereo. If your factory radio is far enough to meet your requirements in your car, then it’s wise of you to replace it with a new car stereo. The picture below is an advanced 2006-2011 VW Volkswagen Cupra car stereo from Seicane, if you have the same dashboard, you can take the following detailed installation guide as a reference.
2006-2011 VW Volkswagen Cupra car stereo after installation
Precautions:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
2006-2011 VW Volkswagen Cupra car stereo installation guide
Step1: Remove the trim panel.
Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.
2006-2011 VW Volkswagen Cupra car stereo installation step 1
Step2: Remove the four screws on the radio.
Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new radio.
2006-2011 VW Volkswagen Cupra car stereo installation step 2
Step3: Take the factory radio out of the dash.
After the four screws are unscrewed, you can easily pull the factory radio out of the dash.
2006-2011 VW Volkswagen Cupra car stereo installation step 3
Step4: Disconnect the wiring harness.
Before you put the factory radio aside, please disconnect the wiring harness at the back of it.
2006-2011 VW Volkswagen Cupra car stereo installation step 4
Step 5: Connect the new Seicane car stereo to the original wiring harness as the user manual or the wiring diagram shows.
Step 6: Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: Put the new Seicane car stereo into the dash and install four screws.
Step 8: Install the trim panel into its original place.
Wish the above installation guide can be helpful for you. If you find the factory radio is different from yours, don’t worry, it’s normal that cars in different manufacture years come with different dashboard. But it won’t have much impact on the installation which is similar on the whole. If you have any questions, you can turn to your dealer or a professional for help.
Because different car stereos are specific for different cars, you need to find a suitable car stereo for your car so that it can work well and be installed perfectly. If you don’t find one, you can refer to the following link which is a modern VW Volkswagen Cupra car stereo from Seicane.
This VW Volkswagen Cupra car stereo comes with a built-in GPS system, you won’t worry about getting lost in an unfamiliar place any more. And you can keep safe and relaxed all the way if you wirelessly link your Bluetooth-enabled cell phone to this unit to have hand-free conversations with your callers and stream music from the playlist of your phone.
What’s more, other popular audio and video formats such as DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG can work with this unit to let you have more options to entertain both yourself and your passengers.
Just install this remarkable VW Volkswagen Cupra car stereo in your car and enjoy the amazing convenience and great enjoyment it brings to you.
Recent Comments