To get to your desired destination without getting any lost, you can easily turn on a GPS navigation system. But if your factory radio doesn’t come with GPS navigation system, it’s wise of you to upgrade your factory radio with a modern aftermarket car stereo which can not only support GPS navigation system but also can bring a lot of enjoyment for you. Here I’d like to introduce the step-by-step 2006-2013 VW Volkswagen EOS car stereo installation guide from Seicane to you. Wish you can get some help from it.
2006-2013 VW Volkswagen EOS car stereo after installation
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2013 VW Volkswagen EOS car stereo installation guide
1.Remove the top panel with a lever.
Remove the top panel with a lever
2.Disconnect the connector at the back of the panel.
Disconnect the connector at the back of the panel
3.Unscrew the screw with a screwdriver.
Unscrew the screw with a screwdriver
4.Remove the metal sheet on the top with your hands.
Remove the metal sheet on the top with your hands
5.Unscrew two screws circled in red shown as follows under the metal sheet.
Unscrew two screws circled in red shown as follows under the metal sheet
6.Remove the air conditioner vent with your hands.
Remove the air conditioner vent with your hands
7.Unscrew two screws under the vent with a screwdriver.
Unscrew two screws under the vent with a screwdriver
8.Remove the panel on the original car radio.
Remove the panel on the original car radio
9.Unscrew four screws holding the original car radio with a screwdriver.
Unscrew four screws holding the original car radio with a screwdriver
10.Take the original car radio out of the dash.
Take the original car radio out of the dash
11.Disconnect all the connectors at the back of the original car radio.
Disconnect all the connectors at the back of the original car radio
12.Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car radio
13.Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car radio
14.Connect the Seicane car stereo to your original car radio ‘s plugs.
15.Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16.Put the new Seicane car stereo into the dash.
17.Put everything into their original place.
Wish the detailed installation guide for a 2006-2013 VW Volkswagen EOS car stereo can be helpful for you. If your dashboard is different from that shown in the guide above, please don’t worry, the installation is similar, and it won’t have much influence on the whole. For any questions, you can consult your dealer. If you don’t find a suitable stereo for your car, I’d like to recommend this all-in-one 2006-2013 VW Volkswagen EOS car stereo from Seicane to you, please click for more details:
This powerful 2006-2013 VW Volkswagen EOS car stereo is ideal for upgrading your car’s factory radio. It has many advanced features, such as built-in gps navigation, Bluetooth, FM/AM radio, USB connection, and so on. A backup camera is also supported to provide assistance when you are reversing. Easy to install, this head unit is just plug and play. You don’t need to make any modification or cut any wire of your car. Wish you like it and have a wonderful time with it!
Recent Comments