Since most aftermarket car stereos are plug and play and will come with all the cables for the installation, therefore, to install a new stereo is no more a problem for car owners who want to enjoy more features by replacing their factory radio with a new one. Here I’d like to share a detailed 2003-2011 VW Volkswagen Touran car stereo installation guide from Seicane with you. If you own a 2003-2011 VW Volkswagen Touran and have the same dashboard as the picture below, you can take it as a reference.
2003-2011 VW Volkswagen Touran car stereo after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2003-2011 VW Volkswagen Touran car stereo installation guide
Step 1: Remove the trim panel.
Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your one hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.
Remove the trim panel
Step 2: Remove the four screws on the radio.
Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new head unit.
Remove the four screws on the radio
Step 3: Take the factory radio out of the dash.
After the four screws are unscrewed, you can easily pull the factory out of the dash.
Take the factory radio out of the dash
Step 4: Disconnect the wiring harness.
Before you put the factory radio aside, please disconnect the wiring harness at the back of the factory radio.
Disconnect the wiring harness
Step 5.Check all the accessories for the new Seicane car radio.
Step 6. Connect the harnesses to the back of the new Seicane car radio.
Step 7. Connect the Seicane car radio to your original car radio ‘s plugs.
Step 8: Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 9: Put the new Seicane stereo into the dash and install the four screws.
Step 10: Install the trim panel into its original place.
Can you understand all the steps above for the installation of a 2003-2011 VW Volkswagen Touran car stereo? If not, you can turn to your dealer for help. If you don’t have enough experience to install it on your own, you can ask a professional for help.
Besides, it’s important for you to make sure you have a correct car stereo for your car. If you have no idea about it, you can refer to this 2003-2011 VW Volkswagen Touran car stereo from Seicane. For more details, you are welcome to click:
This modern VW Volkswagen Touran car stereo based on the WinCE 6.0 operation system can perfectly fit your 2003-2011 VW Volkswagen. The comprehensive features like 3D GPS navigation function, DVD and CD player, bluetooth technology, FM/AM radio, Ipod, USB and SD card connection are all provided for you to get the greatest convenience and enjoyment in your car.
To enjoy all your amazing trips, this VW Volkswagen Touran car stereo is just your best choice. Good luck to you!
Recent Comments