Look at the picture below, it’s a Seicane 2007-2013 Toyota Land Cruiser 200 radio after installation. Do you have a similar or a same dashboard as it? If your answer is yes, then this article is helpful for you to install a new head unit in your car by yourself. To install a car stereo on your own, you can not only save quite a few money but also have a great sense of fulfillment. Wish you can get some help from the following detailed 2007-2013 Toyota Land Cruiser 200 radio installation guide.
2007-2013 Toyota Land Cruiser 200 radio after installation
Some precautions before the installation:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
2007-2013 Toyota Land Cruiser 200 radio installation instructions:
1.Remove the two blots off both sides of handbrake.
2007-2013 Toyota Land Cruiser 200 radio installation step 1
2.Remove screws with your hand.
2007-2013 Toyota Land Cruiser 200 radio installation step 2
3.Remove left and right loosed panel after the bolts are taken off.
2007-2013 Toyota Land Cruiser 200 radio installation step 3
4.Make the cable between them disconnected.
2007-2013 Toyota Land Cruiser 200 radio installation step 4
5.Take the screw out with your hands.
2007-2013 Toyota Land Cruiser 200 radio installation step 5
6.Remove five screws out with a screwdriver as the pictures show.
Remove the first screw
2007-2013 Toyota Land Cruiser 200 radio installation step 6-1
Remove the second and third screws
2007-2013 Toyota Land Cruiser 200 radio installation step 6-2
Remove the fourth and fifth screws
2007-2013 Toyota Land Cruiser 200 radio installation step 6-3
7.Gently take the original radio out of the dash.
2007-2013 Toyota Land Cruiser 200 radio installation step 7
8.Gently unplug the harness at the back of the original radio.
2007-2013 Toyota Land Cruiser 200 radio installation step 8
- Plug the harness to the back of the new Seicane radio.
- Connect wires of the new Seicane radio as the user manual shows. You need to be very careful when you are doing this for it may affect the whole procedure. If you are not clear how to wire the cables, please refer to the wiring diagram.
- Turn on the new Seicane radio to check if everything works well.
- If everything is ok, put the new Seicane radio into the dash.
- Firm the screws, the panel and the bolts into their original place.
The above is the step-by-step installation instruction for a 2007-2013 Toyota Land Cruiser 200 radio. If you have any question about it, please seek help from your dealer or a professional. By the way, if it’s the first time you do it, you need to make sure every step before the installation. If you think it too hard to understand all the steps, it’s suggested you go to a car stereo upgrade center to install it or ask a professional to help you.
A suitable aftermarket car radio matters a lot if you want to have a satisfying upgrade. You need to confirm that the new car radio can work well with your car as well as be installed in your car seamlessly. If you don’t know which car radio can fit your car, I’d like to recommend an amazing Toyota Land Cruiser 200 radio from Seicane to you, please click:
This Toyota Land Cruiser 200 radio comes with a wide range of practical features including DVD player, GPS navigation system, Bluetooth, radio, TV, iPod, USB and SD connection, you can get what you expect from a head unit. You are also allowed to manage documents like WORD/EXCEL/POWERPOINT/PDF/TXT freely in your car just as you are in the office. Just take this fantastic unit to enjoy the great convenience and enjoyment on your way!
Recent Comments