As a car owner, if you haven’t upgraded a car radio on your own before, you may think it quite hard for you to remove the factory radio and install a new car radio in your car. As a matter of fact, the whole removal and installation process is not too complicated. You can either go to a car radio upgrade center or ask a professional for help. This article aims to introduce a detailed installation instruction from Seicane especially for a 2013 2014 Kia Cerato Left car radio. If you have the same or similar dashboard, you can take this instruction as a reference.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 Kia Cerato Left Car radio installation instruction
1. Pry the side panel with a lever, and then remove it.
2. Remove four screws with a screwdriver.
3. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it.
4. Remove four screws holding the factory radio in place with a screwdriver.
5. Take the factory radio out of the dash with your hands.
6. Unplug the connectors at the back of the factory radio.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original car radio ‘s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11.Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Perhaps now you have a general understanding of the installation process for a 2013 2014 Kia Cerato Left car radio. If you encounter any difficulties and don’t know how to overcome them, you can contact your dealer or seek help from a professional. Or during the installation, you can ask someone experienced to help you alongside. Anyway, it is very crucial for you to select an ideal car radio for your beloved car. If you don’t know which kind of car radio can fit your car well, I’d like to recommend a remarkable 2013 2014 Kia Cerato Left car radio from Seicane to you. For more information, please click:
Loaded with the stable Android 6.0 operation system, a powerful 8-core 1.5 GHz RK-PX5 A53 processor and 32 GB INand Flash as well as 2GB RAM, this car radio can be the best replacement for your factory radio in your
Even if you don’t have a good sense of directions, you can get a lot of help from this car radio’s 3D GPS function. When you are driving around an unfamiliar location, you can turn on GPS function to easily locate where you are and accurately navigate to your desired destinations thanks to these features, including landmark building display, 3D street view, destination search, turn-by-turn voice directions, etc. Besides, with dual zone function, you can freely enjoy your favorite music while navigating, and the music can automatically switch to GPS voice.
For your parking safety, you can add a backup camera to this unit for automatically switching to the parking image while reversing.
Wish you enjoy your driving experience accompanied by this all-in-one car radio. Good luck!
Recent Comments