First shows you an appealing picture taken the installation of a 2000-2006 TOYOTA COROLLA EX head unit from Seicane. If you are going to replace your factory radio, such a radio can meet what you need in your car, such as GPS navigation, Bluetooth, DVD Player, WIIF, FM/AM radio, TV, etc. The installation is quite easy. Here comes a step-by-step TOYOTA COROLLA EX head unit installation guide for your reference. Wish you can get some help.
2000-2006 TOYOTA COROLLA EX head unit after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.Please prepare a lever and a screwdriver before the removal and the installation.
5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2000-2006 TOYOTA COROLLA EX head unit installation guide
1.Remove two trim panels at each side of the center console and set it aside.
Remove two trim panels at each side of the center console and set it aside
2.Remove the top panel and set it aside.
Remove the top panel and set it aside
3.Remove 4 screws holding the unit with a Phillips screwdriver.
Remove 4 screws holding the unit with a Phillips screwdriver
4.Gently take out the panel on the radio interface.
Gently take out the panel on the radio interface
5.Take out the radio and disconnect cables at back of it.
Take out the radio and disconnect cables at back of it
6.Check all the accessories for the new Seicane head unit.
Check all the accessories for the new Seicane car radio
7.Connect the harnesses to the back of the new Seicane head unit.
Connect the harnesses to the back of the new Seicane car radio
8.Connect the Seicane head unit to your original car radio ‘s plugs.
9.Put the new Seicane head unit into the dash.
10.Turn on the new Seicane head unit and have a comprehensive check if it works well.
11.Install 4 screws back to their original position.
12.Install the trim panel back to its original place.
Can you understand all the installation steps for a 2000-2006 TOYOTA COROLLA EX head unit? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this amazing TOYOTA COROLLA EX head unit from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:
This top 2000-2006 TOYOTA COROLLA EX head unit comes with a big 6.2 inch HD 800*480 multi-touch screen and a wide variety of features including GPS, Bluetooth, DVD, FM/AM radio, RDS, USB connection, etc. It will not only provide you with accurate directions with a touch of a button but also entertain you on the way. Bluetooth hands-free calling is also available to keep you safe during the driving. Wish you like this 2000-2006 TOYOTA COROLLA EX head unit and have a great time with it!
Recent Comments