How to keep entertained on a long and bored trip? That’ s a question most car owners probably want to ask. Here I’d like to introduce an easy and effective way to you. To simply replace your factory radio with a new aftermarket car stereo, you can almost what you want in a car. And you don’t have to worry about the installation. Now I’d like to share a step-by-step 2002 2003 2004 Dodge Dakota car stereo installation guide from Seicane with you, you can follow it if you also have the same dashboard as below.
2002 2003 2004 Dodge Dakota car stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
2002 2003 2004 Dodge Dakota car stereo installation guide
1.Remove the trim piece above cup holder with a lever.
1.Remove the trim piece above cup holder with a lever.
2.Remove 2 screws behind the trim piece.
2.Remove 2 screws behind the trim piece.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
4.Remove 4 screws which holds the factory radio in place.
4.Remove 4 screws which holds the factory radio in place.
5.Take out the factory radio.
5.Take out the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
7.Connect the cables of the new Seicane car stereo according to the guidance of the user manual.
7.Connect the cables of the new Seicane car stereo according to the guidance of the user manual.
8.Connect the smaller harness at the back of the new radio.
9.Put the new Seicane car stereo back into the dash.
10.Install four screws and trim panel.
11.Install 2 screws behind the trim piece and the trim piece.
12.Turn on the new radio and have a comprehensive test.
Wish the above instruction for a 2002 2003 2004 Dodge Dakota car stereo can be helpful for you. If you find the dashboard above is different from yours, please don’t worry, you can still refer to it. The installation is similar on the whole. If there is any question during the whole process, you can ask your dealer for help. If it’ s the first time for you to install a new stereo, then you’d better have a professional install it.
This top Dodge Dakota car stereo is upgraded to a WinCE 6.0 operating system to smooth the operation. You are able to get a lot of convenience in your car with the built-in wifi for internet surfing and bluetooth technology for hands-free calls and streaming music. Thanks to the latest GPS navigation system, you can easily find your way to a variety of locations with the accurate spoken guidance.
Under such a great discount, it’s wise of you to take this high-end Dodge Dakota car stereo right now! Good luck to you!
Recent Comments