With a new multifunctional car stereo, you can get access to more upgraded and modern features so as to improve your in-car environment and driving experience. The image shown below is the Seicane 2013 2014 2015 HONDA CRV GPS Navi Car Stereo after installation. If your factory stereo for 2013 2014 2015 HONDA CRV is incompatible with many modern features you want to enjoy, you can consider replacing it. And the following is the related installation guide, wish it can offer you some help.
2013 2014 2015 HONDA CRV GPS Navi Car Stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.Please prepare a lever and a screwdriver before the removal and the installation.
5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2013 2014 2015 HONDA CRV car stereo installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
That’s all about how to remove and install a 2013 2014 2015 HONDA CRV GPS Navi Car Stereo. If there is any question about your car stereo or the installation process, you can consult your dealer for advice or seek help from someone experienced as well as a professional. Besides, it is vital for you to check the compatibility between your new car stereo and your car. If you don’t have any ideas, you can refer to this intelligent 2013 2014 2015 HONDA CRV GPS Navi Car Stereo from Seicane. Please click:
This top 2013 2014 2015 HONDA CRV car stereo, featured with practical and entertainment features, can be one of the replacements for your factory stereo. Take entertainment function as an example. When you easily get tired and bored during your long-time driving, this stereo enables you to play any audio and video formats which include VCD/ CD/ MP3/ MPEG4/ DIVX /CD-R/ WMA to cheer up both you and your passengers. Just take this car stereo home and enjoy your driving with it installed in your car from now on!
Recent Comments