The picture below shows an amazing 2009-2013 TOYOTA AVENSIS car stereo from Seicane after installation, which comes with a wide range of practical and entertainment features for you to upgrade your factory radio. Here I would like to share a detailed installation guide for 2009-2013 TOYOTA AVENSIS car stereo with you. If you plan to replace your factory radio, you can refer to the guide carefully.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2009-2013 TOYOTA AVENSIS car stereo installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane head unit into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new head unit.

Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new head unit
Now can you understand all the steps to remove and install a 2009-2013 TOYOTA AVENSIS car stereo? If you can’t fully understand, you can seek help from your dealer or a professional. Or you can ask an experienced person to help you alongside. Besides, it is really necessary for you to check the compatibility between your new car stereo and your car. If you have no ideas, you can refer to this 2009-2013 TOYOTA AVENSIS gps dvd car stereo from Seicane and take it as a reference. Here is the related link, please click:
Based on the pure Android 6.0 operation system and R16 1.6 GHz Quad-core CPU, this car stereo with a 9 inch HD 1280×480 multi-touch digital capacitive LCD screen can be the best choice to replace your factory radio with its high configuration, performance as well as delicate interface. Thanks to the built-in 3D GPS navigation system of high accuracy, it is easy for you to find the best way to arrive at your desired destinations. Besides, with the help of the wireless bluetooth technology, you can freely have hands-free calls and enjoy Bluetooth music by simply pairing your Bluetooth-enabled mobile phone with this unit, which not only brings you convenience but also a lot of fun. Just add it your cart and enjoy your journey with it from now on!
Recent Comments