It’s time for you to consider replacing it with a brand new car stereo when your factory radio can’t meet your needs anymore. A multifunctional head unit can bring a large great deal of convenience to you. You can drive to your destination without asking the way by the 3D GPS navigation. You can enjoy your favorite music and have fun with your friends or family during driving. I’d like to share the installation guide of 2002 2003 2004-2007 Jeep Wrangler Liberty car stereo from seicane to you.
2002 2003 2004-2007 Jeep Wrangler Liberty after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002 2003 2004-2007 Jeep Wrangler Liberty car stereo installation guide
1.Remove the trim panel with a lever.
Remove the trim panel with a lever.
2. Remove 4 screws which holds the factory radio in place.
2-1.Remove 4 screws which holds the factory radio in place
2-2
3.Take out the factory radio and disconnect the wires from the car.
3-1.Take out the factory radio and disconnect the wires from the car
3-2
4. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
5. Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram.
Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram
6. Put the new Seicane head unit into the dash.
7. Install four screws and trim panel.
8. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
That’s all the installation guide for a 2002 2003 2004-2007 Jeep Wrangler Liberty car stereo. Please rest assured that if you find the dashboard is a bit different from yours, the installation guide is quite similar. If you find it hard to install it on your own, it’s suggested you go to the dealer or ask for a professional to have it installed.
In addition, you also need to confirm that your new unit can be compatible with your car. If you are looking for the new one, I’d like to share you the car stereo for 2002 2003 2004-2007 Jeep Wrangler Liberty. You can refer this link to check it:
This 2002 2003 2004-2007 Jeep Wrangler Liberty comes with 4.3 inch 800*480 2‐DIN WVGA HD Digital TFT LCD touch screen, bringing sharp image and vivid color. It can support DVD play with auto memory. All the set parameter can be memorized and restored automatically; Adopts cutting-edge electronic shock protection(ESP) technology, being shockproof; Compatible with formats including DVD±R, DVD±RW, CD-R/RW, VCD, HDVD, DVCD, DIVX etc. Don’t be hesitate and
Recent Comments