Nowadays, to buy an ideal car radio is much more affordable for car owners. However, you still need to pay extra money for its installation if you don’t know how to install it. But if you have some related installation experience and a correct guide, you can finish the installation without paying one cent. Please look at the picture which is a multifunctional Seicane 2002 2003 2004 2005 Dodge Neon car radio after installation. If you also have the same dashboard, you can refer to the following detailed instruction.
2002 2003 2004 2005 Dodge Neon car radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002 2003 2004 2005 Dodge Neon car radio installation steps
1.Loosen the trim panel with a lever.
Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car
2-2.Take the panel off the dash and disconnect the wires from the car
3.Remove the four screws which are holding the unit with a screwdriver.
Remove the four screws which are holding the unit with a screwdriver
4.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit
4-2.Take out the unit and disconnect the wire harness at the back of the unit
5.Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
6. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
7. Connect the Seicane car radio to your original car radio ‘s plugs.
7-1. Connect the Seicane car stereo to your original car radio ‘s plugs
8.Put the new Seicane car radio into the dash.
9.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10.Put trim panel back on your new Seicane car radio after the normal test.
Now can you install your new radio in you car under the guidance of this detailed installation guide specially for a 2002 2003 2004 2005 Dodge Neon car radio? If not, don’t worry, you can ask a professional for help. If there is any question, you can consult your dealer. But if you don’t have an ideal radio for your car, I’d like to recommend this advanced Dodge Neon car radio from Seicane to you. Here’s the link, please check out the following link for more details:
This excellent Dodge Neon car radio integrated with a GPS navigation system and a DVD player is compatible with 2002 2003 2004 2005 Dodge Neon right now. You can enjoy an intuitive interface on its large 5 inch multi-touch screen which is with 800*480 pixel resolution. Wish you like this amazing 2002 2003 2004 2005 Dodge Neon car radio and have a great time with it!
Recent Comments