Do you easily get bored or tired in a long journey? If you say yes, then it’s wise of you to consider replacing your factory radio with a multifunctional car radio which can bring a lot of convenience and enjoyment for you on the way. During the upgrade, a detailed removal and installation guide must be greatly helpful for you. Here I’d like to share the step-by-step 2002-2006 CHRYSLER Sebring Sedan car radio installation instruction from Seicane with you, you can take it as a reference if you also have the same dashboard as the image below.
2002-2006 CHRYSLER Sebring Sedan car radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
2002-2006 CHRYSLER Sebring Sedan car radio installation guide
1.Remove the trim piece above cup holder with a lever.
1.Remove the trim piece above cup holder with a lever.
2.Remove 2 screws behind the trim piece.
2.Remove 2 screws behind the trim piece.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
4.Remove 4 screws which holds the factory radio in place.
4.Remove 4 screws which holds the factory radio in place.
5.Take out the factory radio.
5.Take out the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
7.Connect the cables of the new Seicane radio according to the guidance of the user manual.
8.Connect the smaller harness at the back of the new radio.
9.Put the new Seicane radio back into the dash.
10.Install four screws and trim panel.
11.Install 2 screws behind the trim piece and the trim piece.
12.Turn on the new radio and have a comprehensive test.
Can you install your new radio on your own with the help of this step-by-step installation guide for a 2002-2006 CHRYSLER Sebring Sedan car radio? If you have any questions, you’d better ask your dealer or a professional for help. Please make sure you are a clear understanding of all the steps before the installation. If you don’t find an ideal radio for your car, I’d like to share an intelligent 2002-2006 CHRYSLER Sebring Sedan car radio from Seicane with you. Here’s the link, please click:
This CHRYSLER Sebring Sedan car radio supports a number of multimedia formats, such as DVD/VCD/CD/MP3/MP4/JPG/CD-R etc., so you and your passengers won’t feel tired and boring on a long and tiresome trip. The 3D GPS navigation system can guide you to any unfamiliar location with its most accurate direction and voice prompts. To keep safer, you just need to easily pair your mobile phone with this unit for hands-free calls. Bluetooth music can also be available in this way to relax all the way.
Recent Comments