Would you like to try to remove your factory radio and install the new car radio for your beloved car all by yourself? You may worry whether the whole process is too difficult for your or not. Actually, most car radios are plug and play now, and the installation steps are not so complicated that you can try to follow an installation guide to upgrade your factory radio. The following is a 2004 2005 2006 2007 2008-2009 Mazda 3 car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard. Wish it is helpful for you.
2004 2005 2006 2007 2008-2009 Mazda 3 Car Radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2004 2005 2006 2007 2008-2009 Mazda 3 car radio installation guide
1. Remove the trim panel with a plastic removal tool.
Remove the trim panel with a plastic removal tool
1-1
2. Remove two screws that fixed the car radio on the dashboard.
Remove two screws that fixed the car radio on the dashboard
3. Take out the original car radio.
Take out the original car radio
4. Unplug connectors at the back of the original car radio.
Unplug connectors at the back of the original car radio
4-1
5. Check all the accessories for the new Seicane car radio.
6. Connect the harnesses to the back of the new Seicane car radio.
7. Connect the Seicane car radio to your original radio’s plugs.
8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9. Put the new Seicane car radio into the dash.
10. Put everything into their original place. All the installation is done.
Now can you install your new car radio independently with the guidance of the installation guide on a 2004 2005 2006 2007 2008-2009 Mazda 3 car radio? If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help.
Anyway, it is essential for you to check the compatibility between your new car radio and your car. If the new car radio is not suitable enough, you’d better quit it and buy a new suitable one. Here I would like to share a remarkable 2004 2005 2006 2007 2008-2009 Mazda 3 car radio from Seicane with you. For more details, please click:
This car radio is based on the advanced Android 6.0 operation system and a powerful quad-core CPU processor to facilitate its operation. And it is strong enough to be regarded as one of your best choices to upgrade your factory radio since it can support a wide range of comprehensive features.
With the assistance of 3D GPS navigation system of high accuracy, you are allowed to quickly locate where you are and accurately navigate to your desired destinations through turn-by-turn direction and voice prompts. Besides, this unit’s dual zone function enables you to listen to music while navigating.
What’s more, with the built-in Bluetooth module of this unit, you can connect your Bluetooth-enabled mobile phone to this car radio so as to get access to Bluetooth hands-free calls for convenience and Bluetooth streaming music for fun.
Wish you like this remarkable car radio and good luck to you!
Recent Comments