What can a new head unit bring for me? Some car owners may ask themselves when considering replacing their factory radio. Actually, a modern new head unit can not only meet all your needs in a car, what’s more important, it can improve your driving experience to next level. If you have the same dashboard as the picture below which is a multifunctional 2006-2011 BMW 3 auto and manual air conditional head unit from Seicane, then this installation instruction can do great help for you during the whole process of installation.

2006-2011 BMW 3 auto and manual air conditional head unit after installation

2006-2011 BMW 3 auto and manual air conditional head unit after installation

 

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

 

2006-2011 BMW 3 auto and manual air conditional head unit installation instructions:

 

  1. The original dashboard before installation.

    1. The original dashboard before installation

    1. The original dashboard before installation

 

  1. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly.

    2. Pry the panel off with a lever

    2. Pry the panel off with a lever

 

3.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.

  • 3-1 .Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out

    3-1 .Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out

    3-2 .Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out

    3-2 .Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out

 

  1. Disconnect the power plug behind the CD player and the plug of the radio aerials.
    4-1. Disconnect the power plug behind the CD player and the plug of the radio aerials

    4-1. Disconnect the power plug behind the CD player and the plug of the radio aerials

    4-2. Disconnect the power plug behind the CD player and the plug of the radio aerials

    4-2. Disconnect the power plug behind the CD player and the plug of the radio aerials

 

  1. Take off the plastic bracket frame behind the CD Player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles(no.8).

    5. Take off the plastic bracket frame behind the CD Player

    5. Take off the plastic bracket frame behind the CD Player

 

  1. Unscrew the 2 turnbuckles(no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.

    6. Unscrew the 2 turnbuckles(no.8)

    6. Unscrew the 2 turnbuckles(no.8)

 

7.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted.                    Screw the 4T20 screws on.

  • 7-1.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on

    7-1.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on

    7-2.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on

    7-2.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on

 

  1. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane unit as t he user manual or the wiring diagram shows.
    8-2. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane unit as t he user manual or the wiring diagram shows.

    8-2. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane unit as t he user manual or the wiring diagram shows.

    8-1. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane unit as t he user manual or the wiring diagram shows.

    8-1. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane unit as t he user manual or the wiring diagram shows.

 

  1. Turn on the new Seicane unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10.Put the new Seicane unit into the dash.

  1. Put everything into their original place.

 

Now you should have a general idea about how to install your new unit in your car. If you find it too hard to install a new unit on your own, please ask a professional for help. For any question you may encounter during the whole process, you can consult your dealer. If you don’t have a suitable unit for your car, I’ d like to recommend an amazing 2006-2011 BMW 3 auto and manual air conditional head unit from Seicane to you, please click:

 

http://www.seicane.com/8-8-polegadas-reposic-o-android-4-4-ecr-tatil-sistema-de-navegac-o-gps-para-2006-2011-bmw-3-e90-e91-e93-auto-and-manual-air-conditional-suporta-bluetooth-radio-tpms-dvr-obd-ii-camera-traseira-aux-monitor-control-encosto-de-cabeca-usb-sd-hd-

 

This amazing BMW 3 auto and manual air conditional head unit can function as a  great multimedia player, so you are able to play DVDs, CDs, VCDs, Ipod, FM/AM radio, TV, bluetooth music, etc. to keep both you and your passengers entertained on a long and tiring trip. The built-in GPS navigation system of high precision can provide the worldwide real-time traffic situation for you to find your way to a number of locations.

 

To have an extraordinary driving experience, this wonderful BMW 3 auto and manual air conditional head unit is just your best choice! Just take it and go!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation