All kinds of information are upgrading with a rapid speed nowadays, the traffic information is no exception. Therefore, it’s essential for you to have a precise GPS navigation system to guide you to find your way to your destination. During a long trip, you must want to have something to relax in your car, in that case, a powerful multimedia player is helpful. Look at the following unit, it’s a multifunctional Honda Civic car stereo with GPS navigation function and a DVD player after installation specially made for 2006-2011 Honda Civic.
2006-2011 Honda Civic car stereo after installation
If you have a Honda Civic from 2006 to 2011 and have the exactly same or similar dashboard with the above picture, you can refer to the following Honda Civic car stereo installation instruction to help with your installation.
Precautions:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
2006-2011 Honda Civic car stereo installation guide
- The original CD player.
2006-2011 Honda Civic car stereo installation step 1
2. Pry the cover of the slot below the CD player with a lever and remove it.
2006-2011 Honda Civic car stereo installation step 2
- Remove two screws inside the slot with a ninety-degree screwdriver.
2006-2011 Honda Civic car stereo installation step 3
4.Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel.
2006-2011 Honda Civic car stereo installation step 4
- Remove one screw in the dash.
2006-2011 Honda Civic car stereo installation step 5
6.Remove the vent panel.
2006-2011 Honda Civic car stereo installation step 6
- Unplug the connectors beneath the panel.
2006-2011 Honda Civic car stereo installation step 7
8.Pry the edges along the panel of the original radio, then remove it, after that, take the original CD player out of the dash.
2006-2011 Honda Civic car stereo installation step 8
- Unplug the connectors at the back of the original radio.
2006-2011 Honda Civic car stereo installation step 9-1
2006-2011 Honda Civic car stereo installation step 9-2
- Disconnect the antenna and the other connector on the other side of the original radio.
2006-2011 Honda Civic car stereo installation step 10-1
2006-2011 Honda Civic car stereo installation step 10-2
11.Make antennas and cables of the new Seicane car stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
- Put the new Seicane car stereo into the dash.
- Turn on the new Seicane car stereo and check whether the unit is working properly.
- Install the panel and screws, and put everything into their original place.
If you find the dashboard in the above installation guide is different from yours, please don’t worry, the installation is similar, it won’t have much impact on the installation. If you think all the steps are too hard for you to understand or operate, you’d better ask a professional to help you or directly go to a car stereo upgrade center to have it installed.
A suitable car stereo for your car is quite important if you want to have a satisfying upgrade. If you don’t know which car stereo can fit your car, I’d like to share a great Honda Civic car stereo with you, please click:
This modern Honda Civic car stereo comes with an advanced Android 4.4.4 operating system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor to smooth the operation. With the GPS system, you won’t get lost even you are in an unfamiliar place. To pair your mobile phone which has Bluetooth with this unit, you can make and receive calls without taking your hands off the steering wheel control as well as enjoy your favorite music while you are driving.
Under a big discount right now, it’s time to get this Honda Civic car stereo and install it in your car. Wish you will enjoy your new car stereo and have a good time with it.
Recent Comments