Here is an intelligent 2012 2013 2014 Honda CRV car stereo after installation from Seicane. It looks so pretty, doesn’t it?
2012 2013 2014 Honda CRV car stereo after installation
A new car radio can not only guide you to your desired destination with the most accurate direction but also offer a huge ton of fun for you to relax on the way. To install a new car radio may be difficult for some car owners. However, if you have some related installation experience and a detailed installation guide, you may find that it’s not so much difficult. Here is a step-by-step installation guide for you as a reference.
Some tips before the installation:
- Please disconnect the power before the installation.
- Please prepare a lever and a screwdriver before the removal and the installation.
- Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2012 2013 2014 Honda CRV car stereo installation guide
1.Pry the below left control button with a screwdriver and then pry the right one.
2012 2013 2014 Honda CRV car stereo installation step 1
2.Softly take out the panel.
2012 2013 2014 Honda CRV car stereo installation step 2
3.Use a screwdriver remove two screws which lay in left and right sides of the top panel,and keep screws well for use again.
2012 2013 2014 Honda CRV car stereo installation step 3
4.Prize the front of dashboard with a lever, after it was fastened remove it.
2012 2013 2014 Honda CRV car stereo installation step 4
5.Remove this upper dashboard gently,you may still use screwdriver to help you.
2012 2013 2014 Honda CRV car stereo installation step 5
6.Take out two screws which lay in left and right sides of downward place.
2012 2013 2014 Honda CRV car stereo installation step 6
7.After these work,you can gently get the CD player out.
2012 2013 2014 Honda CRV car stereo installation step 7
8.Plug all the cables which connected them.
2012 2013 2014 Honda CRV car stereo installation step 8
9.Plug cables of the new Seicane stereo to car wires and firm the four screws to their original places.
- Check whether the new Seicane stereo is working without problem.
Hopefully you can get some help from the above guide for a 2012 2013 2014 Honda CRV car stereo. If you find it too hard to finish it on your own, please go to a car stereo upgrade center to have it installed. Besides, it’s necessary for you to make sure you have a right stereo for you car. If you have no idea about this, please check:
This Seicane Honda CRV car stereo comes with a region-free DVD disk player enables you to play any DVD from every country in the world. A number of entertainment options can also be available to relax via the USB and SD card connection. The worldwide real-time GPS makes it easier for you to find your way to any location with turn-by-turn direction and spoken guidance. You can make hands-free calls and stream music by simply connecting with your enabled mobile phone via bluetooth technology.
Go and enjoy your great trips with this popular Seicane Honda CRV car stereo as your perfect road companion. Good luck to you!
Recent Comments