When you get bored and tired during a long trip, it’s a great idea to play some exciting music or your favorite songs to relax yourself. In that case, a modern head unit with a lot of features will must greatly satisfy you. Please look at the picture below which is a fantastic 2003-2010 Renault Megane head unit from Seicane after installation. If you have a same or similar dashboard, you can install it in your car. The installation of it is quite easy. If you want to install it on your own, the following 2003-2010 Renault Megane head unit installation guide is great for you as a reference.

 

2003-2010 Renault Megane head unit after installation

2003-2010 Renault Megane head unit after installation

 

Precautions:

  1. Please set the parking brake and remove the negative cable from your car battery before the removal to ensure safety.
  2. A lever and a screwdriver need to be prepared before the installation.

 

2003-2010 Renault Megane head unit installation guide

1.Unscrew any screws that are securing the trim in place. Be careful to remove all screws before trying to pry off the trim or you may break it.

2003-2010 Renault Megane head unit installation step 1

2003-2010 Renault Megane head unit installation step 1

 

2.Remove the trim with specific pry tools.

2003-2010 Renault Megane head unit installation step 2

2003-2010 Renault Megane head unit installation step 2

 

3.Pull out any necessary components. Disconnect components that are wired to the car. Take a picture of how each is wired for later reference.

2003-2010 Renault Megane head unit installation step 3

2003-2010 Renault Megane head unit installation step 3

 

4.Loosen the original radio and take it out of the dashboard.

2003-2010 Renault Megane head unit installation step 4

2003-2010 Renault Megane head unit installation step 4

 

5.Disconnect the connectors at the back of the original radio.

2003-2010 Renault Megane head unit installation step 5

2003-2010 Renault Megane head unit installation step 5

 

  1. Match up the wires. Match the wires of the car’s harnesses to the new Seicane unit’s harnesses. Each harness connector is unique, so it should be easy to figure out which ones fit together.

    2003-2010 Renault Megane head unit installation step 6

    2003-2010 Renault Megane head unit installation step 6

 

  1. Assemble the mounting kit. If your new Seicane unit comes with a separate mounting kit, assemble it according to the unit’s instructions (it will often mean fitting a metal housing sleeve into the mounting frame).

Push down on the tabs located around the metal sleeve with a screwdriver to secure the metal sleeve in place.

2003-2010 Renault Megane head unit installation step 7

2003-2010 Renault Megane head unit installation step 7

 

  1. Connect the power source. Typically, if you have a wiring harness, this connection will be made when you connect the new unit harnesses to the harnesses in the car.

If you aren’t using a wiring harnesses, you’ll need to manually connect the power. Determine whether your car has a switched power source (typically a red wire) or a constant power source (typically a yellow wire). Some vehicles even have both types of power sources.

2003-2010 Renault Megane head unit installation step 8

2003-2010 Renault Megane head unit installation step 8

 

9.Ground the new Seicane unit. If you’re using wiring harnesses, this connection will be made when you connect the harness pieces.

If you aren’t using a wiring harness, you’ll need to locate the bolt, wire, or screw that connects with the car’s bare metal chassis. Loosen the bolt, wire, or screw and slip the unit’s ground wire (usually black) underneath, then tighten.

2003-2010 Renault Megane head unit installation step 9

2003-2010 Renault Megane head unit installation step 9

 

10.Connect the remaining wires. Plug in the antenna cable and connect the unit’s wiring adapter to the car’s wire harness. Connect the output converter if one is needed to make the new unit compatible with the car’s audio system.

2003-2010 Renault Megane head unit installation step 10

2003-2010 Renault Megane head unit installation step 10

 

11.Test the stereo. Turn the power on and test the AM, FM, and CD components. Test the fade and balance settings to be sure the speakers are working properly. Turn the power back off.

2003-2010 Renault Megane head unit installation step 11

2003-2010 Renault Megane head unit installation step 11

 

  1. Put the new Seicane unit into the dashboard. And install all the screws and trim panels into their original place.

 

Wish the above guide can be helpful for you. If you find it too complicated to understand, it’s suggested you go to a car stereo upgrade center to install it or ask a professional technician to help with it.

 

If you don’t have a head unit, I’d like to recommend a modern 2003-2010 Renault Megane head unit from Seicane to you, you are welcome to click:

 

http://www.seicane.com/seicane-s127091-quad-core-android-4-4-4-autoradio-gps-stereo-for-2003-2010-renault-megane-with-bluetooth-mirror-link-obd2-3g-wifi-cd-dvd-player-16g-flash-steering-wheel-control-hd-1080p-video

 

The powerful capabilities of this head unit will meet all you needs in a car stereo, including GPS navigation, Bluetooth, DVD, CD, FM/AM radio, RDS, iPod, USB, SD, WIFI, etc. What’s more, the large 7 inch multi-touch screen with HD 1024*600 pixel resolution is excellent to operate everything and watch all kinds of videos and movies. Go with this Renault Megane head unit and enjoy your brand new driving experience from now on!

 

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation