Here comes an attractive Seicane Honda CR-V head unit after installation. It can be easily installed in a 2006-2011 Honda CR-V without any gap. The great convenience and enjoyment it brings to you will must satisfy you.
2006-2011 Honda CR-V head unit after installation
If you want to have a more comfortable car life and a relaxing driving experience, it’s wise of you to upgrade your factory radio with a modern aftermarket head unit with a lot of features which can meet all your needs in a car. Some car owners may worry about the installation of a new head unit, in fact, the installation is quite simple. With some related experience and a correct installation guide, you can easily install a head unit on your own. If you have a same or similar dashboard with the above picture, you can refer to the following detailed Honda CR-V head unit installation instructions.
Precautions:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
2006-2011 Honda CR-V head unit installation guide
- The original radio of the car.
2006-2011 Honda CR-V head unit installation step 1
2. Use a screwdriver to push up the heater control on the right side. Do the same on the left side.
2006-2011 Honda CR-V head unit installation step 2
- Take out the heater control with your hands.
2006-2011 Honda CR-V head unit installation step 3
4.Pry the top of the decoration panel with removal tools and remove it with your hands, and put it aside.
2006-2011 Honda CR-V head unit installation step 4-1
2006-2011 Honda CR-V head unit installation step 4-2
5.Push out the vent panel with your hands at the back and set it on the top of the dashboard.
2006-2011 Honda CR-V head unit installation step 5-1
2006-2011 Honda CR-V head unit installation step 5-2
6.Remove four screws(two on the top, the other two at the bottom) holding the radio in the dash.
2006-2011 Honda CR-V head unit installation step 6
- Take the original radio out of the dash with your hands.
2006-2011 Honda CR-V head unit installation step 7
8.Unplug the connectors at the back of the original radio.
2006-2011 Honda CR-V head unit installation step 8
- Make antennas and cables of the new Seicane head unit connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
- Put the new Seicane head unit into the dash.
- Turn on the new Seicane head unit and check whether the unit is working properly.
- Install screws and the panel, and put everything into their original place.
If you find the above steps are difficult for you, it’s suggested you go to a car stereo upgrade center to install it or ask a professional technician to help you. Wish it can be helpful for you if you are going to do it on your own.
To make sure you have a successful upgrading, it’s essential you have a specific head unit which is suitable to your car. Because different head units are made for different cars. If you have no idea which head unit can fit your car, I’d like to share an intelligent Honda CR-V head unit from Seicane to you, which can be seamlessly installed in your car, please click:
This remarkable Honda CR-V head unit comes with a wide range of features, such as a DVD player and a radio integrated with a GPS system and Bluetooth. The GPS can provide you with the real-time guidance to help you find your way easily. The Bluetooth technology allows you to easily sync your mobile phone for hands-free conversations and streaming music. You can also utilize the USB/iPod connection to play whatever you like.
Upgrade your factory radio with this amazing Honda CR-V head unit right now and enjoy all your trips in the future.
Recent Comments