It is very common that you find your factory radio in your beloved car cannot be compatible with some modern features because it is outdated. Under this circumstance, you might as well replace your factory radio with a new aftermarket car radio which can support a wide range of practical and entertainment features. With these features, your in-car life will become more comfortable, more convenient and more satisfactory. The following is a 2004 2005 2006 2007 2008-2010 Peugeot 407 car radio installation instruction from Seicane, which can be taken as your reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2004 2005 2006 2007 2008-2010 Peugeot 407 car radio installation instruction
1. The original dashboard.
2. There are two removal slots in this radio.
3. Insert two release keys into the holes of the radio and turn them to release the radio.
4. Pull out the original radio.And then unplug the connectors at the back of it.
5. There are two screws that fix the screen and the pocket.
6. Unscrew these two screws to removethe screen and the pocket.
7. Check all the accessories for the new Seicane radio.
8. Connect the harnesses to the back of the new Seicane radio.
9. Connect the Seicane radio to your original radio’s plugs.
10. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane radio into the dash.
12. Put everything into their original place.
Now do you know how to removal the factory radio and install the new car radio for your 2004 2005 2006 2007 2008-2010 Peugeot 407? If you have any problems, you can consult your dealer, communicate with someone experienced or turn to a professional for help. And if you still think it hard for you to finish the whole installation successfully, you’d better directly go to a car radio upgrade center to have the new car radio installed by a professional. Additionally, to help you better select an ideal car radio for your car, you can refer to the following link which is a 2004 2005 2006 2007 2008-2010 Peugeot 407 car radio from Seicane. For more details, please click:
This car radio is running on the most advanced and stable Android 7.1.1 operation system and equipped with a powerful quad-core CPU processor, which is good for enhancing your car’s capabilities.
Integrated with the latest 3D GPS navigation system of high accuracy, this remarkable unit allows you to get to any locations you would like to go to through turn-by-turn directions and voice prompts. And with dual zone function, you can freely listen to your favorite music while navigating.
Thanks to the Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this unit so that you can dial, answer, reject or mute hands-free calls as well as listen to Bluetooth streaming music with your hands on the steering wheel and your eyes on the road ahead.
Wish you like this unit and good luck to you.
Recent Comments